Planet GT-802 Manual

Planet Audio/video konverter GT-802

Læs gratis den danske manual til Planet GT-802 (2 sider) i kategorien Audio/video konverter. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Planet GT-802, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

– 1 – – 2 –

– 3 –

– 4 –

1. Product Features

GT-805A Gigabit Ethernet Media Converter:

z Complies with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/

FX, IEEE 802.3ab 1000BASE-T, IEEE 802.3z 1000BASE-SX/LX

standard

z Data transfer rate: TP – 10/100/1000Mbps; SFP – 100/1000Mbps

z DIP switch for LFP function (Disable/Enable) setting

z 9K jumbo frame supported

z Compliant with PLANET’s 10”/19” media converter chassis

2. Checklist

Your GT-805A carton should contain the following items:

The Gigabit Ethernet Media Converter

AC-DC Power Adapter (Output: 5V DC, 2A max.)

This User’s Manual

If any item is missing or damaged, please consult the dealer from

whom you purchased your Gigabit Ethernet Media Converter.

Note

The GT-805A comes with one vacant SFP module

slot. The mini GBIC SFP module is not bundled in the

package.

3. Product Outlook

Front View

There are one RJ45 twisted-pair jack (auto-MDI/MDI-X), one

100/1000X SFP ber-optic slot and four LED indicators. Also one

DIP switch for Link-Fault Passthrough (LFP) feature and “ON” to

turn on the LLCF and LLR detection. And “OFF” to turn o the

feature. Please refer to the following sections for more.

Gigabit Ethernet Converter

10/100/1000BASE-T to 100/1000BASE-X

100/1000X

LNK

ACT

PWR 1000

LFP

OFF

TPFiber

LNK /ACT

Figure 1: GT-805A Front View

Rear View

The rear panel of the Gigabit Ethernet Media Converter indicates

one DC jack, which accepts input power with 5V DC 2A.

5V DC

Figure 2: GT-805A Rear View

Power Information

The power jack of Gigabit Ethernet Media Converter measures

2.5mm in the central post and requires +5VDC power input.

It conforms to the bundled AC-DC adapter and Planet’s Media

Chassis. Should you have the issue to make the power connection,

please contact your local sales representative.

The AC-DC adapter is used as a spare part when your Gigabit

Ethernet Media Converter is installed to a Media Chassis.

2.5mm

DC Receptacle 2.5mm

+5V for each slot

DC receptacle is 2.5mm wide that conforms to the Gigabit

Ethernet Media Converter’s 2.5mm DC jack’s central post. Do

not install any improper unit.

4. Link Fault Pass-through (LFP)

The LFP function includes the Link-Fault-Passthrough function

(LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately

alarm administrators the issue of the link media and provide

ecient solution to monitor the network. The DIP Switch will

disable or enable the LFP function.

LLCF (Link Loss Carry Forward) means when a device is connected

to the converter and the TP line loses the link, the converter’s ber

will disconnect transmission link. LLR (Link Loss Return) means

when a device is connected to the converter and the ber line loses

the link, the converter’s ber will disconnect.

Note

LFP function is ON by default setting. If you are

familiar with the network installation and for

diagnostic purpose (i.e. check which end is broken),

you can turn it off and reset the converter to make

it take effect. Otherwise, please keep it in the default

position.

5. Duplex Mode Support

The GT-805A TP port supports triple speed -- 10/100/1000BASE-T,

auto-negotiation. It will auto detect the link speed and the

duplex mode by default with its link partner. The ber port

(100/1000BASE-FX/SX/LX) allows 100/1000Mbps full duplex by

auto-negotiation. Please also check the setting of the link partner.

6. LED Indication

LED Color Description

PWR Green Lit: To indicate +5V DC power is detected.

Fiber

LNK/ACT

Green

Lit: To indicate the link through ber port is

successfully established.

Blinks: To indicate the ber port is actively

sending or receiving data.

– 5 –

– 6 –

8.ProductSpecications

Model GT-805A

Fiber Connector SFP, LC type

Fiber Mode May vary on module

Fiber Maximum

Distance

May vary on module

Copper Connector 10/100/1000Mbps RJ45

Copper Modes Full duplex, auto-negotiation

Packet Forwarding

Rate (64bytes)

14880pps @10Mbps/148810pps

@100Mbps/1488000pps @ 1000Mbps

DIP switch LFP Disable/Enable

Protocols and

Standards

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3ab 1000BASE-T

IEEE 802.3z 1000BASE-SX/LX

Jumbo Packet Size 9K

Dimensions

(W x D x H)

97 x 70 x 26 mm

Power 5V DC, 2A max.

Emission FCC CE

Temperature

Operating: 0 ~ 50°C

Storage: -10 ~ 70°C

Humidity 5% ~ 90% non-condensing

Installation Wall mount, DIN-rail, chassis installation

Note

1. For connection to the Gigabit Ethernet products,

please refer to the device’s technical manual.

2. Consult your dealer for DIN-rail or chassis installation.

LNK/ACT

Green

Lit: To indicate the link through TP port is

successfully established.

Blinks: To indicate the port is actively sending

or receiving data.

TP 1000

LNK/ACT

Green

Lit: To indicate the port is running at

1000Mbps.

Blinks: To indicate the port is actively sending

or receiving data.

O: To indicate the port is running at

10/100Mbps.

7. Cable Connection Parameter

The wiring details are shown below:

Duplex Connection Limitation (max.)

Twisted Pair

Half/Full

Node to Node

Node to Switch/Hub

100 meters

Fiber Optic Cables:

Standard

(Wavelength)

100BASE-FX

(1310nm)

1000BASE-SX

(850nm)

1000BASE-LX

(1310nm)

Fiber Type

& Cable

Specications

Multi-mode 50/125μm or 62.5/125μm

Single-mode 9/125μm

Produkt Specifikationer

Mærke:	Planet
Kategori:	Audio/video konverter
Model:	GT-802
Bredde:	94 mm
Dybde:	70 mm
Højde:	26 mm
Vægt:	200 g
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-10 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Ethernet LAN-porte (RJ-45):	1
Strømforbrug (typisk):	5.6 W
Driftstemperatur (T-T):	0 - 50 °C
Ethernet LAN-datahastigheder:	10,100,1000 Mbit/s
Forbindelsesteknologi:	Ledningsført
Certificering:	FCC Class A, CE Class A
Netværksstandarder:	IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z
LED-indikatorer:	Ja
Harmoniseret systemkode (HS):	85176990
Indgangsspænding:	5 V
Intern:	Ingen
Maksimal dataoverførselshastighed:	1000 Mbit/s
Indgangsstrøm:	2 A
Fiber optisk strømstik:	SC
Maksimal overførselsafstand:	550 m
Bølgelængde:	850 nm
Ethernet-grænsefladetype:	Gigabit Ethernet
Auto MDI/MDI-X:	Ja
Følsomhed:	-13.5 dBmW
Fiberkanal porte:	1
Tx effekt (min.):	-9.5 dBmW
Tx effekt (maks.):	-4 dBmW
Duplex system:	Full, Half
Indgående omregner interface:	1000Base-T
Udgående omregner interface:	1000Base-SX