Porter-Cable PCC790 Manual

Porter-Cable Hæftemaskine PCC790

Læs gratis den danske manual til Porter-Cable PCC790 (56 sider) i kategorien Hæftemaskine. Denne vejledning er vurderet som hjælpsom af 78 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 39.5 anmeldelser. Har du et spørgsmål om Porter-Cable PCC790, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/56
Gracias por elegir PORTER-CABLE usted! Para registrar su nuevo producto,
visite: www.portercable.com / ServiceAndSupport / ProductRegistration.aspx
Merci d’avoir choisi PORTER-CABLE! Consulter le site Web www.portercable.com/
ServiceAndSupport/ProductRegistration.aspx pour enregistrer votre nouveau produit.
Thank you for choosing PORTER-CABLE! To register your new product, go to:
www.portercable.com/ServiceAndSupport/ProductRegistration.aspx
www.portercable.com
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.
ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES
DE USAR EL PRODUCTO.
*Maximum initial battery pack voltage (measured without a workload) is 20 volts. The
nominal voltage is 18. *La tension initiale maximale du bloc-piles (mesurée sans charge
de travail) est de 20 volts. La tension nominale, mesurée avec une charge de travail, est
de 18 volts. *El máximo voltaje inicial del paquete de baterías (medido sin una carga de
trabajo) es 20 voltios. Si se mide con una carga de trabajo, el voltaje nominal es 18.
20v Max* 18 GaUGE CordlEss Brad NaIlEr
* CloUEUsE saNs fIl No 18 20v Max
Clavadora dE Clavos PEQUEÑos
INaláMBrICa dE CalIBrE 18 dE *20 v Máx
CATALOG NUMBER
N° DE CATALOGUE
CATÁLOGO N°
PCC790
InstructIon manual
Manuel d’instructions
Manual de’instrucciones
2
General Power Tool Safety Warnings
WARNING: Read all safety warnings and all instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE
The term “power tool” in the warnings refers to your mains-operated (corded)
power tool or battery-operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit. Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock
if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase the risk of electric shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is unavoidable, use a ground
fault circuit interrupter (GFCI) protected supply. Use of a GFCI reduces the
risk of electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as dust mask, nonskid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off position before
connecting to power source and/ or battery pack, picking up or carrying the
tool. Carrying power tools with your finger on the switch or energizing power tools
SAFETY GUIDELINES - DEFINITIONS
It is important for you to read and understand this manual. The information it contains
relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols
below are used to help you recognize this information.
DANGER: Indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION: Indicates a potentially haz ard ous situation which, if not
avoided, may result in minor or mod er ate injury.
NOTICE: Used without the safety alert symbol indicates a situation which, if
not avoided, may result in property damage.

Produkt Specifikationer

Mærke: Porter-Cable
Kategori: Hæftemaskine
Model: PCC790

Har du brug for hjælp?

Hvis du har brug for hjælp til Porter-Cable PCC790 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Hæftemaskine Porter-Cable Manualer

Porter-Cable

Porter-Cable FR350B Manual

6 August 2024
Porter-Cable

Porter-Cable PCC792 Manual

1 August 2024
Porter-Cable

Porter-Cable PCC791 Manual

28 Juli 2024
Porter-Cable

Porter-Cable FN250C Manual

27 Juli 2024
Porter-Cable

Porter-Cable NS150C Manual

24 Juli 2024
Porter-Cable

Porter-Cable PN350 Manual

9 December 2023
Porter-Cable

Porter-Cable PCC790 Manual

21 September 2023

Hæftemaskine Manualer

Nyeste Hæftemaskine Manualer

Milwaukee

Milwaukee M12 Fuel 2541-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 2448-20 Manual

13 August 2025
Milwaukee

Milwaukee M12 2540-20 Manual

12 August 2025
Milwaukee

Milwaukee M12 2458-20 Manual

12 August 2025
Makita

Makita MAC210Q Manual

11 August 2025
Black Decker

Black Decker BCN115 Manual

9 August 2025
DeWalt

DeWalt DCN660 Manual

9 August 2025
Ozito

Ozito SNG-2050U Manual

9 August 2025
Hikoki

Hikoki N1804DB Manual

7 August 2025
Hikoki

Hikoki NV45AB3 Manual

4 August 2025