Presto EverSharp Profesional 08810 Manual

Presto Knivsliber EverSharp Profesional 08810

Læs gratis den danske manual til Presto EverSharp Profesional 08810 (4 sider) i kategorien Knivsliber. Denne vejledning er vurderet som hjælpsom af 62 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 31.5 anmeldelser. Har du et spørgsmål om Presto EverSharp Profesional 08810, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
1
INSTRUCTIONS
Visit us on the web at www.GoPresto.com ©2018 National Presto Industries, Inc.
Estas instrucciones también están disponibles en español. Para obtener una copia impresa:
• Descargue en formato PDF en www.GoPresto.com/espanol.
• Envíe un correo electrónico a contact@GoPresto.com.
• Llame al 1-800-877-0441, oprima 2 y deje un mensaje.
Professional EverSharp® three-stage electric knife sharpener
• Three-stage sharpening system provides professional results
at home.
• Blade selector adjusts guides to optimum sharpening angle
for thick, medium, and thin knives.
• Extra-fine grit ceramic wheel assures precision honing.
This is a Listed appliance. The following important safeguards are recommended by most portable appliance manufacturers.
IMPORTANT SAFEGUARDS
To reduce the risk of personal injury or property damage when using electrical appliances, basic safety precautions should always be
followed, including the following:
1. Read all instructions before using this appliance.
2. To protect against the risk of electrical shock, do not put the knife sharpener in water or other liquids.
3. This appliance is not intended for use by children or by persons with reduced physical, sensory, or mental capabilities, or lack of
experience and knowledge. Close supervision is necessary when any appliance is used near children. Children should be supervised
to ensure that they do not play with the appliance.
4. Turn the appliance OFF, then unplug from the outlet when not in use, before assembling or disassembling parts, and before clean-
ing. To unplug, grasp the plug and pull from the outlet. Never pull from the power cord.
5. Avoid contact with moving parts.
6. Do not operate any appliance with a damaged cord or plug, or in the event the appliance malfunctions, or is dropped or damaged
in any manner. Return the appliance to the Presto Factory Service Department for examination, repair, or electrical or mechanical
adjustment.
7. The use of accessory attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock, or injury.
Use only genuine Presto™ accessory attachments and replacement parts.
8. Do not use outdoors.
9. Do not let the cord hang over edge of table or counter or touch hot surfaces.
10. Do not place on or near a hot gas or electric burner or in a heated oven.
11. Do not use the knife sharpener for other than intended use.
12. Carefully route the power supply cord to avoid damage from the knife blades while sharpening.
SAVE THESE INSTRUCTIONS
THIS APPLIANCE IS FOR HOUSEHOLD USE ONLY.
2
Important Cord Information
This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit
into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to modify the plug in any way.
A short power supply cord is provided to reduce the risk of becoming entangled in or tripping over a longer cord. An extension cord may
be used if care is properly exercised in its use. If an extension cord is used, the marked electrical rating of the extension cord should be at
least as great as the electrical rating of the appliance. The extension cord should be arranged so that it will not drape over the countertop
or tabletop where it can be pulled on by children or tripped over unintentionally.
Connect the power supply cord to a 120VAC electrical outlet only.
Getting Acquainted
Your Presto® Professional EverSharp® electric knife sharpener is a three-stage sharpening system which will sharpen knives of alloy,
carbon, or stainless steel. It is designed to sharpen kitchen knives and most sporting knives.
Do not attempt to sharpen scissors, serrated electric knives, or any blade that does not fit freely in the blade guides.
If your knife is very dull, you will probably use all three stages. If a bit dull, use Stages 2 and 3. Frequently, you will use only Stage 3 to
maintain your knives in razor-sharp condition. The blade selector (Fig. A) adjusts the guides to an optimum sharpening angle for thick,
medium, and thin knives.
How to Use
1. Place the knife sharpener on a stable surface.
2. Determine the type of knife being sharpened and then move the blade selector to the appropriate position (Fig. A).
For thick knives, such as hunting knives and cleavers, move the blade selector to the top position.
For medium knives, such as utility, slicing, chef ’s, and Santoku knives, move the blade selector to the middle position.
For thin knives, such as fillet, paring knives, and other light blades, move the blade selector to the bottom position.
You will feel the stop points for each position. When you move the blade selector lever, the orange adjustable blade guides in Stages
2 and 3 will also move so they are at the optimum sharpening angle for the type of blade selected. In Stage 1, the blade guides are in
a fixed position.
3. Turn the unit ON by pressing the symbol “ ” on the ON/OFF switch (Fig. A). l
4. Evaluate the condition of your blade to determine with which sharpening stage to
start:
• If the blade is very dull, or if you are sharpening the knife for the first time, begin
with STAGE 1: GRINDING. This is the stage located to the left of the COARSE
ON/OFF switch. It is the coarsest and most aggressive stage, and will remove
more material from the knife blade than the other stages. It is a fixed stage with
no adjustments, as it places the same angle on all blades in preparation for the
sharpening stations found in Stages 2 and 3. Do not use Stage 1 when Note:
sharpening serrated blades.
• If your knife is a bit dull, begin with STAGE 2: PRECISION GRINDING. This is the
stage located directly to the right of the blade selector. It continues the grinding by giving
the blade a precision edge. It is an adjustable station, further refining the sharpening angle
so that when you are done, your knife is sharpened to the optimum angle dictated by the
width of the blade.
• If your knife just needs a little touch-up sharpening, begin with STAGE 3: FINE HONING.
This is the stage located on the far right and is the stage most frequently used. It is also
an adjustable station, completing the knife sharpening process by honing and polishing
the knife to an exact razor-sharp edge.
5. Begin sharpening. The sharpening procedure is the same for each stage.
Sharpening Procedure:
Begin by placing the heel of the knife in the left slot of the stage in use (Fig. B). The side
of the blade should rest against the outside face of the blade guide slot and the cutting edge
should make contact with the sharpening wheel (Fig. C).
Stage 1
(coarse grinding)
ON/OFF
switch
Fig. A
Stage 2
(precision grinding)
Stage 3
(fine honing)
Blade selector
Blade against outside face of left slot
Fig. B
Fig. C
Outside face
of left slot
Outside face
of right slot

Produkt Specifikationer

Mærke: Presto
Kategori: Knivsliber
Model: EverSharp Profesional 08810

Har du brug for hjælp?

Hvis du har brug for hjælp til Presto EverSharp Profesional 08810 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Knivsliber Presto Manualer

Presto

Presto EverSharp 08800 Manual

2 September 2023
Presto

Presto EverSharp Profesional 08810 Manual

13 August 2023
Presto

Presto Professional EverSharp Manual

4 Maj 2023

Knivsliber Manualer

Nyeste Knivsliber Manualer

Proxxon

Proxxon TSG 250/E Manual

27 Juli 2025
Adler

Adler AD 4512 Manual

19 Juli 2025
Hecht

Hecht 9230 Manual

16 Juli 2025
Baccarat

Baccarat The Precision Edge Manual

14 Juli 2025
Guzzanti

Guzzanti GZ-006A Manual

14 Juli 2025
Ribimex

Ribimex PRS35 Manual

7 Juli 2025
Emga

Emga 403050 Manual

6 Juli 2025
Adler

Adler AD 4518 Manual

5 Juli 2025
Ikea

Ikea FLAKSA 506.030.17 Manual

4 Juli 2025
Graef

Graef SG520 Manual

4 Juli 2025