Pyle PMX6BU Manual

Pyle Stavblender PMX6BU

Læs gratis den danske manual til Pyle PMX6BU (12 sider) i kategorien Stavblender. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Pyle PMX6BU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

PMX6BU

Wireless DJ Sound FX Audio Mixer

Wireless BT Streaming Stage & Studio Mixer System

with Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio

www.PyleUSA.com

PMX6BU Wireless DJ Sound FX Audio Mixer

Wireless BT Streaming Stage & Studio Mixer System with

Karaoke Style Mic-Talkover, MP3/USB/SD Readers, FM Radio

• System Pairing - Connection Setup:

1. Be sure that the DJ Sound FX Audio Mixer switch is set to POWER OFF

position.

2. Turn each channel and volume controls to “ ” position.LEVEL MASTER 0

3. Next, turn ON the unit and receiver. Ensure both units are fully charged

(if the battery indicator is red, then it requires charging). LED

4. Use an Aux (3.5mm) audio cable to connect the wireless audio receiver's

into a compatible speaker audio input jack -- and ensure if the ' ' Aux

mode on the connected speaker is activated.

5. Pair your wireless receiver with the audio mixer.

*See the included 'Quick Start Guide':

Press the ‘POWER’ button on the wireless receiver (the ‘ ’ indicator a. EMIT

light will blink).

’ indicator is blinking, press the ‘ ’ button (the b. While the ‘EMIT 5.8G/BT

‘ ’ indicator light will remain solid).RXD

’ indicator light remains solid, press and hold the c. While the ‘RXD

‘ ’ button for ~ 5 seconds (or until the ‘RXD’ indicator blinks red).5.8G/BT

’ indicator light blinks red, hit the switch and power d. While the ‘RXD ON

the mixer unit.

e. Press the ‘Lock Code’ button on the rear of the mixer unit. Then press

and hold the ‘Match Code’ button for about ~5 seconds or until the

‘Work LED’ indicator blinks. The system is pairing while the ‘RXD’

indicator on the receiver blinks -- and the ‘Work LED’ indicator on the

mixer blinks. Wait until the ‘Work LED’ indicator on the mixer remains

solid to proceed to the next step.

f. While the ‘Work LED’ indicator light on the mixer remains solid, press

the ‘Lock Code’ button to secure the wireless pairing connection

(if a successful wireless pairing connection is made, the ‘ RXD’ indicator

on the receiver will stop blinking red).

Stream some sound! You can now connect the wireless receiver to a g.

compatible speaker system via Aux-Input connection cable.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	Stavblender
Model:	PMX6BU

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PMX6BU stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Stavblender Pyle Manualer

6 December 2024

6 December 2024

21 August 2024

20 August 2024

19 August 2024

Pyle PMIDIPD30 Manual

2 August 2024

Pyle PKSCRD308 Manual

1 August 2024

Pyle PDJLT88 Manual

27 Juli 2024

Pyle PMX6BU Manual

26 Juli 2024

Pyle PMX802M Manual

24 Juli 2024

Stavblender Manualer

Nyeste Stavblender Manualer

Rane AM2 Manual

15 Juni 2025

Girmi SB04 Manual

14 Juni 2025

Midas HD96-AIR Manual

12 Juni 2025

Gourmia GBJ190 Manual

11 Juni 2025

Gourmia GHB2360 Manual

10 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

9 Juni 2025

8 Juni 2025