Pyle PYPDWM812WH Manual

Pyle DJ Gear PYPDWM812WH

Læs gratis den danske manual til Pyle PYPDWM812WH (4 sider) i kategorien DJ Gear. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Pyle PYPDWM812WH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WIRELESS HANDHELD MICROPHONE SYSTEM SPECIFICATION

Please read carefully before use and keep for future reference.

TRANSMITTER

1. Power switch

2. Display screen

3. Frequency selective buttons

4. Battery case

www.PyleUSA.com

RECEIVER

Front Panel

Back Panel

1. Antenna for B channel

2. DC12V Power supply

3. 6.35 Mixed output port

4. The right track 6.35 input port

1. C/6.35 Audio line input port

2. D/6.35 Audio line input port

3. Volume adjustment for channel C

4. Volume adjustment for channel D

5. Volume adjustment for channel A

6. Volume adjustment for channel B

7. Echo adjustment

8. Music Volume adjustment

9. USB 2.1 input port

10. MP3 module display

11. Switch button (Bluetooth/MP3)

12. Power switch

13. Multi function button

(Pause/Play/Next/Last)

14. Recording Button

5. The left track 6.35 input port

6. Stereo 3.5 output port

7. 3.5 Audio input port

8. Antenna for A channel

OPERATING THE TRANSMITTER

1. Open the battery case according to the instruction and insert battery

noting correct polarities (+ and –) indicated in the battery compartment.

2. Set the handheld switch to “ ” position, or press the switch. ON

The microphone will display the frequency which means the microphone

is turned ON. Turn the switch to “ ” for turn o power or press the OFF

switch again. If there’s no frequency display that means the microphone

is turned OFF.

DISPLAY FUNCTION

NOTE:

The receiver and transmitter system should be with same channel

(frequency) one by one, otherwise it will not work.

www.PyleUSA.com

OPERATING THE RECEIVER

1. Rotate the antennas A and B to separate them by 90 degrees.

2. Connect the power base DC/AC

3. Audio output connection:

*Mixed non-equilibrium output, insert the end of audio cable to UN BAL

AF OUT: 1:2 socket and insert to the other end of MIC IN or AUX IN

socket from mixer or amplier.

4. Turn ON the power switch, power indicator lights up.

5. When the handheld microphone is turned on, the “RF” indicator of the

receiver lights up. Receiver output volume can be controlled by the

volume control knob.

*Insert the voice line into UN BAL AF OUT: socket 1, connect the other

end into socket of MIC IN or AUX IN of mixer or amplier, same operation

type with another channel.

*Independent balanced output BAL AF OUT: 1 and 2 provide audio

transmission three-pin card interface for professional mixer, ampiiers.

RECEIVER INSTALLATION THE METHOD

• One meter above the ground.

• Pull out all the antennas, otherwise it will aect the reception eect.

• Be more than one meter away from the wall.

Produkt Specifikationer

Mærke:	Pyle
Kategori:	DJ Gear
Model:	PYPDWM812WH

Har du brug for hjælp?

Hvis du har brug for hjælp til Pyle PYPDWM812WH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

DJ Gear Pyle Manualer

Pyle PYPDWM812WH Manual

28 August 2024

Pyle PLTT82BTOR Manual

6 August 2024

Pyle PTCD56UBWD Manual

30 Juli 2024

Pyle PVNTTR22 Manual

26 Juli 2024

Pyle PVTT2UWD Manual

23 Juli 2024

DJ Gear Manualer

Nyeste DJ Gear Manualer

Fuzzix MBR60 Manual

14 Marts 2025

UDG Gear AlphaTheta DDJ-GRV6 Manual

3 Marts 2025

Reloop RMX-30 BT Manual

7 Februar 2025

Headliner R4 Manual

30 Januar 2025

Arturia BeatStep Manual

11 Januar 2025

Line 6 Helix Control Manual

11 Januar 2025

Glorious Record Box 55 Manual

5 Januar 2025

Glorious Record Box Display Door Manual

5 Januar 2025

Glorious Session Cube XL Manual

5 Januar 2025

Glorious Modular Mix Station Manual

5 Januar 2025