QSC AD-P6T Manual

QSC Højttaler AD-P6T

Læs gratis den danske manual til QSC AD-P6T (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 11 anmeldelser. Har du et spørgsmål om QSC AD-P6T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

AcousticDesign (AD)

Quick Start Guide

Model: AD-P6T

1001015-01

*1001015-01*

EXPLANATION OF SYMBOLS

The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.

The term “CAUTION” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result

in equipment damage to equipment that may not be covered under the warranty.

The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of the procedure.

The term “NOTE” indicates additional useful information.

The lightning ash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage

within the product’s enclosure that may constitute a risk of electric shock to humans.

The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in

this manual.

IMPORTANT SAFETY INSTRUCTIONS

• Read these instructions and keep a copy for future reference.

• Strictly follow and heed all instructions and warnings.

• Consult a licensed and qualied professional engineer to devise and/or review an appropriate pendant mounting scheme.

• Do not use or submerge this loudspeaker product in or near water or liquids.

• Clean only with a dry cloth. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near, or into the loudspeaker

product.

• Do not block any ventilation opening. Install in accordance with the manufacturer’s instructions.

• Do not install the loudspeaker near any heat sources, such as radiators, heat registers, stoves, or other apparatus (including

ampliers).

• Do not use any attachments, accessories, mounts, or brackets that are not specied or approved by QSC, LLC.

• Refer all service to qualied personnel. Service is required if the hanging mechanism or loudspeaker have been damaged in

any way, such as liquid having been spilled or objects have fallen into the loudspeaker or the loudspeaker has been exposed

to rain or moisture, does not operate normally, or has been dropped.

• Observe all applicable local codes.

• Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

Suspend the Loudspeaker

WARNING!: Do not attach the snap hook to the loudspeaker or any other load

until the hanger cable has been anchored to a suitable structural member.

1. Insert the wire cable into the appropriate hole in the connector (see Figure 1). The connector’s

two holes are directional, so cable will only insert one way; if it will not go through, the cable is

inserted into the wrong hole.

2. Loop the cable over the structural member where the loudspeaker is to hang. The structure must

be capable of supporting at least 5× the weight of the loudspeaker—AD-P6T: 59 lb or 20.5 kg.

NOTE: Building codes in some jurisdictions may require higher safety factors.

3. Insert the cable through the other hole in the connector.

4. Adjust the length of the cable hang so the snap hook is at the desired height. To shorten the hang,

simply pull the cable further through one or both holes in the connector (Figure 2). To lengthen

the hang or to remove the cable from the structural member, insert the release key into the

appropriate release key hole; this will unlock that hole in the connector and allow the cable to

move in the other direction.

Wire the Loudspeaker

We recommend using insulated twisted pair stranded copper wire of an adequate gauge to

minimize resistive losses. To facilitate daisy-chaining, the AD-P Series loudspeakers have a four-

pole input connector with two parallel-connected + and - pairs, and they each come a Euro-style

four-pole pluggable connector with clamping screws for securing to the wire conductors.

1. Remove the magnetic grille and set the transformer tap switch located to the desired wattage

or to 16Ω for low-impedance operation (Figure 5). Reattach the grille.

2. On the top of the enclosure, remove the protective cover for the input connector.

3. Route the wires through the cover. Connect the pair of wires to the + and - terminals of the

Euro-style connector. Tighten the clamping screws securely.

4. To daisy-chain on to another loudspeaker, attach a second wire pair to the Euro-style

connector. Plug the connector into the loudspeaker’s input connector and tighten the retaining

screws (Figure 6). Reinstall the protective cover.

5. To strain-relieve the loudspeaker line wiring, secure it to the suspension cable using the tie-

wraps provided.

WARNING!: Install the system in

accordance with local building

codes and regulations. Some

jurisdictions may require two

suspension points.

Use a licensed contractor or

professional engineer. QSC is

not responsible for damages

that result from negligent

installation of any bracket,

hanger, or loudspeaker.

Warranty

For a copy of the QSC Limited Warranty, visit the QSC website at www.qsc.com

Para una copia de la Garantía Limitada de QSC, visite el sitio web de QSC, en www.qsc.com

Pour obtenir une copie de la garantie limitée de QSC, visitez le site de QSC à www.qsc.com

Besuchen Sie die Webseite von QSC (www.qsc.com) um eine Kopie der beschränkte Garantie von QSC zu erhalten.

如果您想要QSC有限保修的複印本，请造访QSC音频产品的网站www.qsc.com

Для получения копии ограниченной гарантии QSC посетите веб-сайт QSC Audio Products, расположенный по адресу

www.qsc.com.

www.qsc.com    QSC 

















    QSC       

QSC限定保証の複製には、QCSのウェブサイトwww.qsc.comにアクセスしてください。

Maintenance and Repair

Advanced technology—e.g., the use of modern materials and powerful electronics—requires specially adapted maintenance

and repair methods. To avoid subsequent damage to the equipment, personal injury, and/or creation of additional safety

hazards, have all maintenance or repair work on the equipment performed only by a QSC authorized service station or an

authorized QSC International Distributor. QSC is not responsible for any injury, harm, or related damages that arise from any

failure of the customer, owner, or user of the equipment to facilitate those repairs.

Figure 4

Figure 2 Figure 3

WARNING!: Never insert the release key while

there is a load on the hanger cable.

5. Attach the snap hook to the suspension tab on the

loudspeaker (Figure 4). Make sure the safety latch on the hook

closes fully with the loudspeaker attached before you transfer

the weight of the loudspeaker to the cable.

Figure 5

Figure 1

Figure 6

Structural

member

Pull cable to

shorten hang.

Insert release

key to lengthen

hang or remove.

Insert cable

here

Release

key hole

End view

Insert cable

here

Release

key hole

End view

Structural

member

Structural

member

To additional

loudspeakers

From

ampliﬁer

Trademark ofce and other countries. All other trademarks are the property of their respective owners.

http://patents.qsc.com.

Produkt Specifikationer

Mærke:	QSC
Kategori:	Højttaler
Model:	AD-P6T
Bredde:	- mm
Dybde:	- mm
Højde:	323 mm
Vægt:	4100 g
Produktfarve:	Hvid
Pakkevægt:	5400 g
Pakkedybde:	356 mm
Pakkebredde:	406 mm
Pakkehøjde:	343 mm
Bluetooth:	Ingen
Udgangseffekt (RMS):	60 W
Driftstemperatur (T-T):	-20 - 50 °C
Husmateriale:	Acrylonitrile butadiene styrene (ABS), Metal
Pakketype:	Kasse
Frekvensområde:	56 - 20000 Hz
Impedens:	16 ohm (Ω)
Højttaler, type:	2-vejs
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Kan monteres i loftet
Diameter:	287 mm
Antal drivere:	1
Diskanthøjttaler:	Ja
Antal drivere til diskant:	1
Sensitivitet:	88 dB
Diskant diameter:	19 mm
Bashøjttaler:	Ja
Antal bashøjttalerdrev:	1
Woofer diameter:	165 mm
Forstærker:	Ingen
Woofer diameter (britisk mål):	6.5 "