Ram Audio DALIMa 14Q Manual

Ram Audio Modtager DALIMa 14Q

Læs gratis den danske manual til Ram Audio DALIMa 14Q (7 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 6 anmeldelser. Har du et spørgsmål om Ram Audio DALIMa 14Q, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/7

RAM_OCS v3 Quick Guide

INSTALLATION AND FIRST STEPS

Welcome to RAM OCS, the Online Control System for RAM Audio V/W Series DSP amplifiers. By using it you can control

and monitor the DSP unit of a V/W amplifier through an Ethernet network or a USB connection, in a Windows system.

To start, install the software in a Windows system (XP, Vista, 7, 8 or 10) and connect the amplifiers to the Ethernet network or

the USB port. Each amplifier is programmed from factory with a unique IP number inside the range 192.168.xxx.xxx. To de-

tect initially the amplifiers you have to work inside this range. Change the computer IP to 192.168.0.10 for example, and use

a mask 255.255.0.0. After detect the amplifiers inside this range you can change the IP of each one if required.

Execute the RAM OCS software using the Shortcut created in the desktop and start scanning the network. To do that, click in

the loupe (1) icon placed near to the left top side of the window. The system has to detect all amplifiers you have connected

in your network or connected using the USB port. To open an amplifier you have to do a double click on the amplifier showed

in the devices tree (2).

Create a virtual amplifier: if you do not have any amplifier connected to the system, you can add an offline amplifier clicking

with the right mouse button on the “Amplifiers” section of the devices tree (3), and selecting the Add device option.

To obtain some help for the different button functions, you can maintain the cursor over a button for two seconds to show a

hint which can help you.

The elements of the main screen are as follows:

Project Menu Tab

Amp Menu Tab

Devices Tree:

show a list of all

amplifiers detected

in your Ethernet

network or USB

connection

Amp Information:

show the model,

serial number,

name, IP address

and firmware ver-

sion of the selec-

ted amplifier

Amps Scan - Tree

management icons

Poject/Amp Menu

Icons

Frequency response graphic window

Amplifier configuration main window

Produkt Specifikationer

Mærke:	Ram Audio
Kategori:	Modtager
Model:	DALIMa 14Q

Har du brug for hjælp?

Hvis du har brug for hjælp til Ram Audio DALIMa 14Q stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Ram Audio Manualer

Ram Audio Pi2-5K AES3 Manual

6 September 2025

Ram Audio W 12044 Manual

6 September 2025

Ram Audio S 1500 Manual

6 September 2025

Ram Audio MDi4-6K D BS/P Manual

19 August 2025

Ram Audio Pi4-6K AES3 Manual

14 August 2025

Ram Audio MDi8-6K Manual

13 August 2025

Ram Audio Pi4-6K D Manual

13 August 2025

Ram Audio MDi8-2K7 D BS/P Manual

13 August 2025

Ram Audio DALIMa 14Q Manual

27 December 2024

Ram Audio DALIMa 10Q Manual

16 December 2024

Modtager Manualer

Nyeste Modtager Manualer

Insignia NS-HZ315 Manual

29 September 2025

Shinybow SB-5658K Manual

29 September 2025

KanexPro SP-1X8HD150M Manual

29 September 2025

AudioControl EPIC500 Manual

29 September 2025

AudioControl Epic Big Four Manual

29 September 2025

VigilLink VLSP-12CTH14 Manual

29 September 2025

RDL RU-PA518 Manual

29 September 2025

Shinybow SB-3716 Manual

29 September 2025

VigilLink VLSP-14CTH14 Manual

29 September 2025

VigilLink VLSP-18CTH14 Manual

29 September 2025