RC4WD Z-E0106 Manual

RC4WD Batterioplader Z-E0106

Læs gratis den danske manual til RC4WD Z-E0106 (1 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om RC4WD Z-E0106, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
Battery Charging
Input Voltage
Output Current
Charging Model
Charging Capability
100VAC~240VAC
650MA
pre-charged, steady current,
5-8 NiMH batteries
SPECIFICATIONS
WARNING
The charger can get hot during use. Use the charger in a well ventilated area, away from people and electrically conductive
or inflammable materials.
If the battery has suspicious reactions during the charge or discharge, such as overheating, venting or leaking, immediately
disconnect the battery and store it in a safe location, away from people and inflammable materials.
This charger is designed to charge only 5~8 Cell NiMH batteries.
Make sure that the battery is compatible with the charger’s charge
rate.
Never let children operate unsupervised while charger is in use.
Adult supervision is recommended at all times.
The charger is for indoor use only. Do not use in case of high humidity
conditions or condensation.
Do not attempt to open or modify the charger’s case.
Do not let objects or liquids penetrate the charger’s cooling vents.
1. Charge only batteries that are cool to the touch and are not
damaged (swollen, bent, broken or punctured).
2. Connect the charger to the proper wall receptacle noting
proper polarity.
3. Plug the battery’s connector into the charger’s connector.
The LED will light red as it is charging.
4. The charger will emit a tone and the LED will change to
green once fully charged. NOTE: Monitor the battery during
the charge and end the charging process if the charger or
battery becomes very hot.
5. Always unplug the battery from the charger immediately
upon completion of charging.
CAUTION: Overcharging a battery can cause a fire.
RC4WD Universal NIMH Peak
Battery Charger Instructions
CAUTION Please read these instructions
carefully prior to using!
100-0072

Produkt Specifikationer

Mærke: RC4WD
Kategori: Batterioplader
Model: Z-E0106

Har du brug for hjælp?

Hvis du har brug for hjælp til RC4WD Z-E0106 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Batterioplader RC4WD Manualer

RC4WD

RC4WD Z-E0106 Manual

31 August 2024

Batterioplader Manualer

Nyeste Batterioplader Manualer

Savio

Savio LA-06 Manual

25 Oktober 2025
Goji

Goji GQICAR17C Manual

19 Oktober 2025
Tecmate

Tecmate Optimate 5 Voltmatic Manual

19 Oktober 2025
Sungrow

Sungrow IDC30E Manual

18 Oktober 2025
Sungrow

Sungrow SG33CX Manual

18 Oktober 2025
NEO Tools

NEO Tools 11-890 Manual

15 Oktober 2025
Xtorm

Xtorm XPD06 Manual

13 Oktober 2025
Xtorm

Xtorm AU202 Manual

12 Oktober 2025
Alpha Tools

Alpha Tools A-ES 1000/1 Manual

12 Oktober 2025
Alpha Tools

Alpha Tools A-ES 1700/1 Manual

12 Oktober 2025