Regency Panorama PG36NG-6 Manual

Regency Varmeapparat Panorama PG36NG-6

Læs gratis den danske manual til Regency Panorama PG36NG-6 (56 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.2 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Regency Panorama PG36NG-6, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/56
Models: PG36NG-6
PG36LP-6
Owners &
Installation
PLEASE KEEP THESE INSTRUCTIONS
FOR FUTURE REFERENCE
Manual
March 04, 2022
LISTINGS AND CODE APPROVALS
These gas appliances have been tested in
accordance with AS/NZS 5263.0 & AS/NZS
5263.1.3 and have been certified by the
Australian Gas Association for installation
and operation as described in these Instal-
lation and Operating Instructions. Must be
installed as per AS/NZS5601.
Your unit should be serviced annually
by an authorised service person.
920-108f
Panorama
®
PG36 Gas Log Fireplace
WARNING:
Improper installation, adjustment, alteration,
service or maintenance can cause injury or
property damage. Refer to this manual. For
assistance or additional information consult
an authorised installer, service agency or the
gas supplier.
FOR YOUR SAFETY:
Do not store or use gasoline or other flammable
vapours and liquids in the vicinity of this or
any other appliance.
Installation and service must be performed by
an authorised installer, service agency or the
gas supplier.
FOR YOUR SAFETY:
What to do if you smell gas:
Do not try to light any
appliance
Do not touch any electrical
switch: do not use any phone
in your building.
Immediately call your gas
supplier from a neighbour's
phone. Follow the gas
supplier's instructions.
If you cannot reach your
gas supplier, call the fire
department.
2 | Regency
®
PG36 Gas Fireplace
TO THE NEW OWNER:
Congratulations!
You are the owner of a state-of-the-art Gas Log Fireplace by FPI FIREPLACE PRODUCTS INTERNATIONAL
LTD. The PG36 has been designed to provide you with all the warmth and charm of a wood fireplace
at the flick of a switch. The model PG36 has been approved by the Australian Gas Association for both
safety and efficiency. As it also bears our own mark, it promises to provide you with economy, comfort and
security for many trouble free years to follow. Please take a moment now to acquaint yourself with these
instructions and the many features of your Regency
®
Fireplace.
PAIRING YOUR REMOTE CONTROL
The control box will only learn the Remote ID codes during the first 30 seconds after power is applied
and will ignore this special command from the Remote after the first 30 seconds.
To match the control box to the remote, follow the steps below :
1. Remove a battery from the remote handset.
2. Remove main power to the control box by turning off the isolation switch or switch on the GPO to
the heater.
3. Wait 30 seconds (approx.).
4. Reconnect main power to the control box.
5. Immediately put the battery back in the remote & point the remote in the general direction of the
heater.
6. Press and hold the FFAANN 11 && FFAANN 22 buttons simultaneously. The
letters “LC” will appear on the display indicating the ID codes have
been transmitted.
7. Release both buttons.
8. The display will revert back to the normal off mode display. The
heater should light – spark, burner, etc even though the remote
screen says the heater is off.
9. Press the Off button on the remote. The heater should turn off.
10. Wait approx. 30 seconds turn the on again & check all the functions
work – fan speed can be adjusted, flame height can be adjusted, etc.
Note: To view a step-by-step pairing video please visit
regency-fire.com.au/Customer-Care/Fireplace-Care-Videos
Note: The Remote Control Handset has a set of unique ID codes that is
pre-programmed into its memory. This set of ID codes helps to
differen-tiate one Remote Control Handset from another so that only
the control box with a matching ID code will respond to the appropriate
Remote Control Handset.
regency.com.au
PAIRING YOUR REMOTE CONTROL
The control box will only learn the remote ID codes during the first 30 seconds after power
is applied and will ignore this special command from the remote afterward.
To match the control box to the remote, follow the steps below:
1. Remove a battery from the remote handset.
2. Remove main power to the control box by turning off the isolation switch or switch on the
GPO to the heater.
3. Wait 30 seconds (approx.)
4. Reconnect main power to the control box.
5. Immediately put the battery back in the remote & point the remote in the direction of the
heater.
6. Press and hold the PROG and FAN buttons simultaneously. The letters "LC" will appear on
the display indicating ID code transmission.
7. Release both buttons.
8. The display will revert to the normal off mode display. The heater should light - spark, burner,
etc. - even though the remote screen says the heater is off.
9. Press the OFF button on the remote. The heater should turn off.
10. Wait approx. 30 seconds to turn the heater on again & check that all functions work - fan
speed and flame height can be adjusted, etc.
Note: To view a step-by-step pairing video please visit
regency-fire.com.au/Customer-Care/Fireplace-Care-Videos
Note: The remote control handset has a set of unique ID codes that is pre-progarmmed into
its memory. This set of ID codes helps to differentiate one remote control handset from
another; only the control box with a matching ID code will respond to a handset.

Produkt Specifikationer

Mærke: Regency
Kategori: Varmeapparat
Model: Panorama PG36NG-6

Har du brug for hjælp?

Hvis du har brug for hjælp til Regency Panorama PG36NG-6 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Varmeapparat Regency Manualer

Regency

Regency FG39-NG2 Manual

17 Juni 2025
Regency

Regency City Series Chicago Corner 40 Manual

16 Juni 2025
Regency

Regency Gemfire HZO42 Manual

9 Juni 2025
Regency

Regency Mansfield L850B ST Manual

21 August 2024
Regency

Regency Windsor F2452 Manual

21 August 2024
Regency

Regency Greenfire GFi750 Manual

20 August 2024
Regency

Regency Hume L850B ST Manual

20 August 2024
Regency

Regency Narrabri F100B-1 Manual

20 August 2024
Regency

Regency DVi34L Manual

20 August 2024
Regency

Regency Panorama PG36NG-6 Manual

19 August 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Euromac

Euromac EK2001 Manual

9 Oktober 2025
Euromac

Euromac Ultrafan Manual

9 Oktober 2025
Euromac

Euromac Golden 2500 Manual

9 Oktober 2025
Euromac

Euromac RK2009T Manual

9 Oktober 2025
Euromac

Euromac Golden 1801 Manual

9 Oktober 2025
Euromac

Euromac Safe-t-Heater 1000 Manual

9 Oktober 2025
Euromac

Euromac EK3001 Manual

9 Oktober 2025
Euromac

Euromac Fanheater 600 Manual

9 Oktober 2025
Euromac

Euromac E-Convect Manual

9 Oktober 2025
Euromac

Euromac Golden 1800 Comfort Manual

9 Oktober 2025