Regency FG39-NG2 Manual

Regency Varmeapparat FG39-NG2

Læs gratis den danske manual til Regency FG39-NG2 (52 sider) i kategorien Varmeapparat. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Regency FG39-NG2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/52

04 March 2022

FOR YOUR SAFETY

What to do if you smell gas:

Do not try to light any appli-

ance

Do not touch any electri-

cal switch: do not use any

phone in your building.

Immediately call your gas

supplier from a neighbour's

phone. Follow the gas sup-

plier's instructions.

If you cannot reach your

gas supplier, call the ﬁre

department.

WARNING:

Improper installation, adjustment, alteration,

service or maintenance can cause injury or

property damage. Refer to this manual. For

assistance or additional information consult

an authorised installer, service agency or

the gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or other ﬂam-

mable vapours and liquids in the vicinity of

this or any other appliance.

Installation and service must be performed

by an authorised installer, service agency or

the gas supplier.

PLEASE KEEP THESE INSTRUCTIONS

FOR FUTURE REFERENCE

Owners &

Installation

Manual

LISTINGS AND CODE APPROVALS

These gas appliances have been tested

in accordance with AS 5263.0, AS/NZS

5263.1.3 and have been certiﬁed by the

Australian Gas Association for installa-

tion and operation as described in these

Installation and Operating Instructions.

Your unit should be serviced annually

by an authorised service person.

919-864j

Models: FG39-NG2

FG39-LPG2

Freestanding Gas Stove

FG39-2 Freestanding Gas Stove

To the New Owner:

Congratulations! You are the owner of a state-of-the-art Regency Room Sealed Gas Stove by FPI Fireplace Products Inter-

national Ltd. The Regency Gas Series of hand crafted appliances has been designed to provide you with all the warmth and

charm of a woodstove. The models FG39-NG2 and FG39-LPG2 of this series has been approved by AGA. As it also bears

our own mark, it promises to provide you with economy, comfort and security for many trouble free years to follow. Please

take a moment now to acquaint yourself with these instructions and the many features of your Regency Room Sealed Free-

standing Gas Stove.

PAIRING YOUR REMOTE CONTROL

The control box will only learn the Remote ID codes during the first 30 seconds after power is applied

and will ignore this special command from the Remote after the first 30 seconds.

To match the control box to the remote, follow the steps below :

1. Remove a battery from the remote handset.

2. Remove main power to the control box by turning off the isolation switch or switch on the GPO to

the heater.

3. Wait 30 seconds (approx.).

4. Reconnect main power to the control box.

5. Immediately put the battery back in the remote & point the remote in the general direction of the

heater.

6. Press and hold the FFAANN 11 && FFAANN 22 buttons simultaneously. The

letters “LC” will appear on the display indicating the ID codes have

been transmitted.

7. Release both buttons.

8. The display will revert back to the normal off mode display. The

heater should light – spark, burner, etc even though the remote

screen says the heater is off.

9. Press the Off button on the remote. The heater should turn off.

10. Wait approx. 30 seconds turn the on again & check all the functions

work – fan speed can be adjusted, flame height can be adjusted, etc.

Note: To view a step-by-step pairing video please visit

regency-fire.com.au/Customer-Care/Fireplace-Care-Videos

Note: The Remote Control Handset has a set of unique ID codes that is

pre-programmed into its memory. This set of ID codes helps to

differen-tiate one Remote Control Handset from another so that only

the control box with a matching ID code will respond to the appropriate

Remote Control Handset.

regency.com.au

PAIRING YOUR REMOTE CONTROL

The control box will only learn the remote ID codes during the ﬁrst 30 seconds after power

is applied and will ignore this special command from the remote afterward.

To match the control box to the remote, follow the steps below:

1. Remove a battery from the remote handset.

2. Remove main power to the control box by turning off the isolation switch or switch on the

GPO to the heater.

3. Wait 30 seconds (approx.)

4. Reconnect main power to the control box.

5. Immediately put the battery back in the remote & point the remote in the direction of the heater.

6. Press and hold the PROG and FAN buttons simultaneously. The letters "LC" will appear on

the display indicating ID code transmission.

7. Release both buttons.

8. The display will revert to the normal off mode display. The heater should light - spark, burner,

etc. - even though the remote screen says the heater is off.

9. Press the OFF button on the remote. The heater should turn off.

10. Wait approx. 30 seconds to turn the heater on again & check that all functions work - fan

speed and ﬂame height can be adjusted, etc.

Note: To view a step-by-step pairing video please visit

regency-ﬁre.com.au/Customer-Care/Fireplace-Care-Videos

Note: The remote control handset has a set of unique ID codes that is pre-progarmmed into its

memory. This set of ID codes helps to differentiate one remote control handset from another;

only the control box with a matching ID code will respond to a handset.

Produkt Specifikationer

Mærke:	Regency
Kategori:	Varmeapparat
Model:	FG39-NG2

Har du brug for hjælp?

Hvis du har brug for hjælp til Regency FG39-NG2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Varmeapparat Regency Manualer

Regency FG39-NG2 Manual

17 Juni 2025

Regency City Series Chicago Corner 40 Manual

16 Juni 2025

Regency Gemfire HZO42 Manual

9 Juni 2025

Regency Mansfield L850B ST Manual

21 August 2024

Regency Windsor F2452 Manual

21 August 2024

Regency Greenfire GFi750 Manual

20 August 2024

Regency Hume L850B ST Manual

20 August 2024

Regency Narrabri F100B-1 Manual

20 August 2024

Regency DVi34L Manual

20 August 2024

Regency Panorama PG36NG-6 Manual

19 August 2024

Varmeapparat Manualer

Nyeste Varmeapparat Manualer

Sogo SS-18291 Manual

17 Juni 2025

Sogo SS-18445 Manual

17 Juni 2025

Life On Products LCAEA002 Manual

17 Juni 2025

Life On Products LCAEA003 Manual

17 Juni 2025

Life On Products LCAEA007 Manual

17 Juni 2025

XPower A-16 Manual

16 Juni 2025

Life On Products LCAEA009 Manual

16 Juni 2025

Life On Products LCAEA008 Manual

16 Juni 2025

Life On Products LCAWA002 Manual

16 Juni 2025

Wulfe WPW330M9 Manual

16 Juni 2025