RetroSound Redondo-RT M2 Manual

RetroSound Bilradio Redondo-RT M2

Læs gratis den danske manual til RetroSound Redondo-RT M2 (2 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 12 anmeldelser. Har du et spørgsmål om RetroSound Redondo-RT M2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Optional hardware

x(2) x(2) x(4) x(2)

x(8)

D E

Attach each InfiniMount

Bracket to the Radio Motor

with the eight small screws.

Included in your

Radio Motor box

Insert the Thumb-Rollers into the InfiniMount

Brackets. Gently push to snap into place.

Complete the installation by plugging one end of the modular

cable into the left Thumb-Roller and the other end of the modular

cable into the left side of the Radio Motor. Then, repeat for the

right Thumb-Roller on the right side. Use the optional hardware

(if needed) to help mount the radio to the dash.

Thumb-Roller Quick Start Guide

What’s in the Box Installation

Hardware

Thumb-Rollers

Modern Sound For Your Classic

tech@retromanufacturing.com | help.retromanufacturing.com

Refer to the user manual included in your motor box or on our website for more comprehensive instructions.

Radio Presets

Redondo Mode

The following steps must be performed to set up the Radio Motor to function with the Redondo

Thumb-Roller controls. Press and hold the Left-Inside Thumb-Roller(1) for approximately 15

seconds to reboot the radio into SEL PANEL mode. While holding the Power Button the unit will

display the following sequence: RETROSOUND>RADIO>GOODBYE>TIME DISPLAY>SEL

PANEL, continue holding the thumb-roller until SEL PANEL is displayed. Once SEL PANEL is

displayed release the Left-Inside Thumb-Roller(1) and immediately press and release the Left-

Inside Thumb-Roller (1) to cycle through the choices until REDONDO appears. The Display

will Flash REDONDO 5 times and will turn off. Your Radio Motor is now configured to work with

your selected face.

Control Layout Basic Operation

Thumb-Roller Quick Start Guide

Modern Sound For Your Classic

tech@retromanufacturing.com | help.retromanufacturing.com

Power On/O󰀨

Press the Left-Inside Thumb-Roller( ) to power the unit on.1

Press and hold the Left-Inside Thumb-Roller(1) to power the unit o󰀨.

Volume

Rotate the Left-Outside Thumb-Roller( ) up or down to change the volume.2

Changing Source Modes

Rotate the Left-Inside Thumb-Roller( ) down to cycle through the source modes.1

Changing Radio Bands

Rotate the Right-Inside Thumb-Roller( ) up to cycle through the radio bands.3

Tune

Rotate the Right-Outside Thumb-Roller( ) to scroll through the stations.4

Mute On/O󰀨

Press the Right-Outside Thumb-Roller( ) to mute and unmute.4

Equalizer (EQ)

Press the Left-Outside Thumb-Roller(2) to enter the Tone Control sub-menu. Press and release the

Left-Outside Thumb-Roller(2) until you see the EQ setting you’d like to adjust. Rotate the Left-Outside

Thumb-Roller(2) up or down to adjust the setting. Press the Left-Outside Thumb-Roller( ) to move to 2

the next item, and repeat to adjust each option. Let the unit time out to set.

Setting the Clock

Press and hold the Right-Inside Thumb-Roller( ) to enter the System Settings sub-menu. Rotate 3

the Right-Outside Thumb-Roller(4) to cycle through the choices until you see CLK, then press

the Right-Outside Thumb-Roller(4) to select. Rotate the Right-Outside Thumb-Roller( ) up or 4

down to adjust the hours. Then press the Right-Outside Thumb-Roller( ) again to move on to 4

minutes. Rotate the Right-Outside Thumb-Roller( ) up or down to adjust the minutes. Let the unit 4

time out to setup .

Display Color*

Press and hold the Right-Inside Thumb-Roller( ) to enter the System Settings sub-menu. Rotate 3

the Right-Outside Thumb-Roller(4) to cycle through the choices until you see SCAN, then press

the Right-Outside Thumb-Roller(4) to cycle through the colors. Let the unit time out to set.

Beep On/O󰀨

Press and hold the Right-Inside Thumb-Roller( ) to enter the System Settings sub-menu. Rotate 3

the Right-Outside Thumb-Roller(4) to cycle through the choices until you see BEEP ON/OFF,

then press the Right-Outside Thumb-Roller( ) to choose between BEEP ON or BEEP OFF. Let 4

the unit time out to set.

Setting Radio Presets

To set a preset, tune to the station you want to set the preset to, and then press and hold the

desired Preset Button( ) for two seconds.5

Recalling Radio Presets

To recall a preset, simply press the Preset Button( ) your station was set to previously. 5

1 Left-Inside Thumb-Roller

5 Preset Buttons Right-Outside 4

Thumb-Roller

2 Left-Outside

Thumb-Roller

3 Right-Inside Thumb-Roller

*Some features are not available on all radios.

Produkt Specifikationer

Mærke:	RetroSound
Kategori:	Bilradio
Model:	Redondo-RT M2

Har du brug for hjælp?

Hvis du har brug for hjælp til RetroSound Redondo-RT M2 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Bilradio RetroSound Manualer

RetroSound Grand Prix Manual

10 August 2024

RetroSound Newport Manual

10 August 2024

RetroSound New York Manual

10 August 2024

RetroSound Redondo RS Manual

10 August 2024

RetroSound Wonderbar 3 Manual

10 August 2024

RetroSound Wonderbar 1 M1 Manual

9 August 2024

RetroSound RetroRadio M2 Manual

9 August 2024

RetroSound Redondo-RT M2 Manual

9 August 2024

RetroSound Newport M2 Manual

9 August 2024

RetroSound Grand Prix M2 Manual

9 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Vordon Pilot AC-920 Manual

15 Juni 2025

Manta RS4508 Manual

15 Juni 2025

Krüger&Matz KM2014 Manual

9 Juni 2025

Blow Pilot AVH-8624 Manual

9 Juni 2025

Krüger&Matz KM2009 Manual

9 Juni 2025

Krüger&Matz KM2004 Manual

9 Juni 2025

Vordon York HT-930 Manual

8 Juni 2025

Carlinkit CPC200-U2W Plus Manual

8 Juni 2025

Vordon Jersey HT-800 Manual

8 Juni 2025

Peiying PY-8288 Manual

7 Juni 2025