RetroSound RetroRadio M2 Manual

RetroSound Bilradio RetroRadio M2

Læs gratis den danske manual til RetroSound RetroRadio M2 (2 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om RetroSound RetroRadio M2, eller vil du spørge andre brugere om produktet?

Side 1/2
Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face
to the Radio Motor with the four small screws.
B
B
Radio Face Quick Start Guide
What’s in the Box Installation
RetroRadio Face
Shafts
x
(2)
Modern Sound For Your Classic
tech@retromanufacturing.com | PH:888.325.1555 | www.retromanufacturing.com
(Vintage Dial Screen sold separately)
Backstrap must be mounted securely
Refer to the user manual included in your motor box or on our website for more comprehensive instructions.
x(8) x(6)
Hardware
x(4)
A
B
CD
Radio Presets
(Vintage Dial Screen sold separately)
Control Layout Basic Operation
tech@retromanufacturing.com | PH:888.325.1555 | www.retromanufacturing.com
Setting Radio Presets
To set a preset, tune to the station you want to set the preset to, and then press and hold the
desired Preset Button( ) for two seconds.5
Recalling Radio Presets
To recall a preset, simply press the Preset Button( ) your station was set to previously. 5
Power On/O󰀨
Press the Left-Front Knob( ) to power the unit on.1
Press and hold the Left-Front Knob(1) to power the unit o󰀨.
Volume
Rotate the Left-Front Knob( ) to change the volume.1
Changing Source Modes
Rotate the Left-Rear Knob( ) clockwise to cycle through the source modes.2
Changing Radio Bands
Rotate the Right-Rear Knob( ) counter-clockwise to cycle through the radio bands.4
Tune
Rotate the Right-Front Knob( ) to scroll through the stations.3
Mute On/O󰀨
Press the Right-Front Knob( ) to mute and unmute.3
Equalizer (EQ)
Press the Left-Front Knob( ) to enter the Tone Control sub-menu. Press and release the Left-1
Front Knob(1) until you see the EQ setting you’d like to adjust. Rotate the Left-Front Knob( ) to 1
adjust the setting. Press the Left-Front Knob( ) to move to the next item, and repeat to adjust 1
each option. Let the unit time out to set.
Setting the Clock
Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3
Right-Front Knob( ) to cycle through the choices until you see CLK, then press the Right-3
Front Knob( ) to select. Rotate the Right-Front Knob( ) to adjust the hours. Then press the 3 3
Right-Front Knob( ) again to move on to minutes. Rotate the Right-Front Knob( ) to adjust the 3 3
minutes. Let the unit time out to set.
Display Color*
Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3
Right-Front Knob( ) to cycle through the choices until you see SCAN, then press the Right 3
Front Knob( ) to cycle through the colors. Let the unit time out to set.3
Beep On/O󰀨
Press and hold the Right-Front Knob( ) to enter the System Settings sub-menu. Rotate the 3
Right-Front Knob( ) to cycle through the choices until you see BEEP ON/OFF, then press the 3
Right-Front Knob( ) to choose between BEEP ON or BEEP OFF. Let the unit time out to set.3
*Some features are not available on all radios.
1 Left-Front Knob
5 Preset Buttons
Right-Front Knob 32 Left-Rear Knob
Right-Rear Knob 4
Modern Sound For Your Classic
Radio Face Quick Start Guide


Produkt Specifikationer

Mærke: RetroSound
Kategori: Bilradio
Model: RetroRadio M2

Har du brug for hjælp?

Hvis du har brug for hjælp til RetroSound RetroRadio M2 stil et spørgsmål nedenfor, og andre brugere vil svare dig