RetroSound Newport Manual


Læs gratis den danske manual til RetroSound Newport (2 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om RetroSound Newport, eller vil du spørge andre brugere om produktet?

Side 1/2
x(4)x(4)
E
G
H
Radio Face Quick Start Guide
What’s in the Box Installation
Newport Face
Shafts Knobs
x(2)
x(2) x(2)
x(2)x(2)
x(4)
Hardware
Backstrap must be
mounted securely
Top Control Shaft
Modern Sound For Your Classic
tech@retromanufacturing.com | help.retromanufacturing.com
Refer to the user manual included in your motor box or on our website for more comprehensive instructions.
Plug the ribbon cable from the Radio Motor into the Radio Face. Attach the Radio Face to the Radio
Motor with the four small screws. With the Radio facing towards you, plug the top Control Shaft into
the left side of the Radio Motor. Plug the bottom Control Shaft into the right side of the Radio Motor.
Refer to Kit Installation
Instructions for use.
Place a metal spacer
on each shaft. Slide the
shafts into the Radio
Face.
Place the white plastic
spacer and thin metal
washer onto the shaft, then
secure with the shaft nut.
DO NOT OVERTIGHTEN.
Install the
rear knob
first, then the
front knob.
x(2)
x(2)
Bottom
Control Shaft
A
B
C
D E F G H
F
A
D
D
B
C
NOTE: The RetroSoun
logo should be facing up.


Produkt Specifikationer

Mærke: RetroSound
Kategori: Bilradio
Model: Newport

Har du brug for hjælp?

Hvis du har brug for hjælp til RetroSound Newport stil et spørgsmål nedenfor, og andre brugere vil svare dig