Rotel A10 Manual

Rotel Modtager A10

Læs gratis den danske manual til Rotel A10 (55 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Rotel A10, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/55

A10

Stereo Integrated Ampliﬁer

Amplicateur Stéréo Intégré

Stereo-Vollverstärker

Ampliﬁcatore Integrato Estereofonico

Geïntegreerde stereoversterker

Amplicatore integrato stereo

Integrerad Stereoförstärkare

Интегрированный стерео усилитель

Owner’s Manual

Manuel d’utilisation

Bedienungsanleitung

Manual de Instrucciones

Gebruikershandleiding

Manuale di istruzioni

Instruktionsbok

àÌÒÚÛÍˆËﬂ ÔÓÎ¸ÁÓ‚‡ÚÂÎﬂ

2A10 Stereo Integrated Ampliﬁer

WARNING: The rear panel power cord connector is the mains power

disconnect device. The device must be located in an open area that

allows access to the cord connector.

The unit must be connected to a power supply only of the type and

voltage specified on the rear panel. (USA: 120 V/60Hz, EC: 230V/50Hz)

Connect the component to the power outlet only with the supplied

power supply cable or an exact equivalent. Do not modify the

supplied cable. A polarized plug has two blades, with one wider than

the other. A grounding plug has two blades plus a third grounding

prong. These are provided for your safety. Do not defeat grounding

and/or polarization safety provisions. If the supplied plug does not

fit your outlet, please consult an electrician for replacement of the

obsolete outlet. Do not use extension cords.

The mains plug is the disconnect of the unit. In order to completely

disconnect the unit from the supply mains, remove the main plug from

the unit and the AC power outlet. This is the only way to completely

remove mains power from the unit.

Do not route the power cord where it will be crushed, pinched, bent,

exposed to heat, or damaged in any way. Pay particular attention to the

power cord at the plug and where the cord exits the back of the unit.

The power cord should be unplugged from the wall outlet during a

lightning storm or if the unit is to be left unused for a long period of time.

Use only accessories specified by the manufacturer.

Use only with a cart, stand, rack, bracket or shelf system strong

enough to support the unit. Use caution when moving the unit in a

stand or rack to avoid injury or damage to the unit.

Use Class 2 wiring for speaker connections to ensure proper installation

and minimize the risk of electrical shock.

Immediately stop using the component and have it inspected and/

or serviced by a qualified service agency if:

• The power supply cord or plug has been damaged.

• Objects have fallen or liquid has been spilled into the unit.

• The unit has been exposed to rain.

• The unit shows signs of improper operation.

• The unit has been dropped or damaged in any way.

WARNING: There are no user serviceable parts inside. Refer all

servicing to qualified service personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose

the unit to moisture or water. Do not expose the unit to dripping or

splashing. Do not place objects filled with liquids, such as vases, on

the unit. Do not allow foreign objects to get into the enclosure. If the

unit is exposed to moisture, or a foreign object gets into the enclosure,

immediately disconnect the power cord from the wall. Take the unit

to a qualified service person for inspection and necessary repairs.

Read all the instructions before connecting or operating the component.

Keep this manual so you can refer to these safety instructions.

Heed all warnings and safety information in these instructions and

on the product itself. Follow all operating instructions.

Clean the enclosure only with a dry cloth or a vacuum cleaner.

Do not use this unit near water.

You must allow a minimum 10 cm or 4 inches of unobstructed

clearance around the unit.

Do not place the unit on a bed, sofa, rug, or similar surface that could

block the ventilation openings. If the unit is placed in a bookcase or

cabinet, there must be ventilation of the cabinet to allow proper cooling.

Keep the component away from radiators, heat registers, stoves, or

any other appliance that produces heat.

Rotel products are designed to comply with

international directives on the Restriction of

Hazardous Substances (RoHS) in electrical and

electronic equipment and the disposal of Waste

Electrical and Electronic Equipment (WEEE). The

crossed wheelie bin symbol indicates compliance

and that the products must be appropriately recycled

or processed in accordance with these directives.

Important Safety Instructions

This symbol means that this unit is double insulated.

An earth connection is not required.

Place the unit on a xed, level surface strong enough

to support its weight. Do not place it on a moveable

cart that could tip over.

Produkt Specifikationer

Mærke:	Rotel
Kategori:	Modtager
Model:	A10

Har du brug for hjælp?

Hvis du har brug for hjælp til Rotel A10 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Rotel Manualer

Rotel DX-3 Manual

7 Juli 2025

Rotel RB-1592 Manual

31 Maj 2025

Rotel RC-1580MKII Manual

30 Maj 2025

30 Maj 2025

26 September 2024

5 September 2024

4 September 2024

30 August 2024

Rotel RAS-5000 Manual

28 August 2024

Rotel RA-12 Manual

24 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Perreaux Silhouette SXH2 Manual

13 September 2025

Perreaux Silhouette SXP2 Manual

13 September 2025

Perreaux Silhouette SX25i Manual

12 September 2025

Perreaux Silhouette SXV2 Manual

12 September 2025

Sony STR-DE635 Manual

12 September 2025

Perreaux Silhouette SX25 Manual

12 September 2025

Perreaux Audiant 80i Manual

12 September 2025

Samsung HW-C500 Manual

12 September 2025

Lab Gruppen CPA1202 Manual

12 September 2025

Sony STR-DH510 Manual

12 September 2025