Sauter TN 230-0.1US Manual
Læs gratis den danske manual til Sauter TN 230-0.1US (19 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Sauter TN 230-0.1US, eller vil du spørge andre brugere om produktet?
Side 1/19
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction Manual Ultrasonic Material
Thickness Gauge
SAUTER -TN US
Version 2.0
04/2020
GB
TN_US- -e-2020 BA
PROFESSIONAL MEASURING
TN_US- -e-2020 2 BA
GB
SAUTER -TN US
V. 2.0 04/2020
Instruction Manual Ultrasonic Material Thickness
Gauge
Congratulations on the purchase of an ultrasonic material thickness gauge from
SAUTER. We hope you will enjoy your quality measuring device with its wide range of
functions.
For questions, wishes or suggestions we are at your disposal.
Table of contents:
1. General overview ........................................................................................... 4
1.1 Technical data ........................................................................................................................... 4
1.2 General functions ..................................................................................................................... 5
1.3 Measuring principle .................................................................................................................. 5
1.4 Equipment ................................................................................................................................. 6
2. Design features .............................................................................................. 7
2.1 Digital display ........................................................................................................................... 7
2.2 Description of the control panel ............................................................................................. 8
3. Preparation for commissioning .................................................................... 8
3.1 Selection of the sound generator ........................................................................................... 8
3.2 Conditions and preparations for surfaces ........................................................................... 10
4. Mode of operation ........................................................................................ 11
4.1 Switching on and o .............................................................................................................. 11
4.2 Sound generator setting (zero setting) ................................................................................ 11
4.3 Sound velocity ........................................................................................................................ 11
4.4 Measurements are made ....................................................................................................... 13
4.5 The ultrasound image mode ( scan mode) .......................................................................... 14
4.6 Change the resolution ............................................................................................................ 14
4.7 Changing the units ................................................................................................................. 15
4.8 Storage management ............................................................................................................. 15
4.9 "Beep" mode ........................................................................................................................... 16
4.10 EL Backlight ............................................................................................................................ 16
4.11 Battery information ................................................................................................................ 16
4.12 Automatic switch- off .............................................................................................................. 16
4.13 Basic setting of the system (Reset) ...................................................................................... 16
4.14 Connection to PC ................................................................................................................... 16
5. Maintenance ................................................................................................. 17
6. Transport and storage ................................................................................. 17
7. Sound velocities .......................................................................................... 17
8. The measurement of tubes and hose material .......................................... 18
9. Measuring hot surfaces ............................................................................... 18
Produkt Specifikationer
| Mærke: | Sauter |
| Kategori: | Måling |
| Model: | TN 230-0.1US |
Har du brug for hjælp?
Hvis du har brug for hjælp til Sauter TN 230-0.1US stil et spørgsmål nedenfor, og andre brugere vil svare dig
Måling Sauter Manualer
3 Februar 2025
1 Februar 2025
27 Januar 2025
27 Januar 2025
27 Januar 2025
21 November 2024
21 November 2024
21 November 2024
21 November 2024
21 November 2024
Måling Manualer
- Laserliner
- Kopul
- ClimeMET
- Etymotic
- PeakTech
- Fluke
- Stelzner
- Bresser
- König
- SilverCrest
- Pantone
- Voltcraft
- Seaward
- PQ Plus
- Metrix
Nyeste Måling Manualer
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025
14 Juni 2025