Sharp PN-ZB03H Manual

Sharp Modtager PN-ZB03H

Læs gratis den danske manual til Sharp PN-ZB03H (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Sharp PN-ZB03H, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

PN-ZB03H

Operation Manual HDBaseT Receiver Board

Applicable models

(as of May 2016)

LCD MONITOR

PN-R556/PN-R496/PN-R426

Available models differ according to region.

CAN ICES-3 (A) / NMB-3 (A)

• THANK YOU FOR PURCHASING A SHARP PRODUCT.

Before using the product, please be sure to read this operation manual carefully. In particular, be sure to read the

section “To ensure safe and correct use”. After reading the manual, keep it in a convenient location where it can be

accessed at any time.

As for how to use the product, refer to the operation manual of the LCD MONITOR.

TIPS

- This product was shipped after strict quality control and inspection; however, if breakage or a malfunction should be found, contact your SHARP dealer

or your nearest customer contact.

- Please understand that SHARP CORPORATION bears no responsibility for errors made during use by the customer or a third party, nor for any other

malfunctions or damage to this product arising during use, except where indemnity liability is recognized under law.

- This product and its accessories may be upgraded without advance notice.

IMPORTANT:

To aid reporting in case of loss or theft, please record the product’s model and

serial numbers in the space provided.

The numbers are located on the product.

Model No.:

Serial No.:

U.S.A. ONLY

WARNING:

FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved by the manufacturer could void the

user’s authority to operate this equipment.

NOTE:

This equipment has been tested and found to comply with the limits for Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user

will be required to correct the interference at his own expense.

U.S.A. ONLY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

U.S.A. ONLY

WARNING:

This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take

adequate measures.

To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: USB terminal, HDBaseT terminal.

To ensure safe and correct use

This operation manual and the product use various displays and labels to ensure safe use. Ignoring these displays and labels and incorrectly using the

product could have results as classied below.

Please read the following warning symbol information before reading the rest of this section, and be sure to strictly observe all instructions.

Warning: Not following these instructions could result in death or serious injury.

•AskyourSHARPdealerorqualiedservicepersonfortheattachment/detachmentofthisproduct.

Attachment/detachment of this product by the customer may result in electric shock or injury.

•Nevertrytomodify,disassemble,orrepairthisproduct.

Doing so may result in re, electric shock, or injury.

•Onlyusetheaccessorieswithspeciedmodels.

Failure to do so may result in re.

CINSE1411MP51 (1)

Produkt Specifikationer

Mærke:	Sharp
Kategori:	Modtager
Model:	PN-ZB03H
Bredde:	103.6 mm
Dybde:	30 mm
Højde:	118.2 mm
Harmoniseret systemkode (HS):	85176990
Plug and play:	Ja
Maksimal driftstilstand:	100 m