Shelly TRV Manual


Læs gratis den danske manual til Shelly TRV (5 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Shelly TRV, eller vil du spørge andre brugere om produktet?

Side 1/5
HOW TO CONTROL PUMP OR
BOILER WITH MULTIPLE SHELLY TRV
DEVICES
It is often the case in many houses that the hot water pump or boiler has to be switched off
when all radiators and heating circuits are closed. This leads to additional energy savings.
When we have separate wireless devices in all rooms, they must work simultaneously by
sending a signal to the central heating system so that it can turn the pump on and off depending
on the condition of all of them.
Shelly TRV and Shelly1 for pump/boiler control
To make this decision, you need a ShellyTRV connected to each radiator and a Shelly1 or
ShellyPlus 1, which is connected to the central heating system, according to one of the
diagrams below.
How to set Shelly TRV to control Shelly1
Each Shelley TRV can execute HTTP commands to another device on two criteria.
1. When the Valve is fully closed - This action is performed once, each time the Shelley
TRV closes completely and stops the water to the radiator.
2. When the Valve is partially or fully open - This action is performed every 5 min
automatically when Shelly TRV is open at any percentage.
You can set these 2 actions to work through the local interface of the device or through the
Shelley Cloud app.


Produkt Specifikationer

Mærke: Shelly
Kategori: Smart hjem
Model: TRV

Har du brug for hjælp?

Hvis du har brug for hjælp til Shelly TRV stil et spørgsmål nedenfor, og andre brugere vil svare dig




Smart hjem Shelly Manualer

Smart hjem Manualer

Nyeste Smart hjem Manualer