Shinybow SB-3706 Manual

Shinybow Modtager SB-3706

Læs gratis den danske manual til Shinybow SB-3706 (8 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Shinybow SB-3706, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

INSTRUCTION MANUAL

SB-3706

1x8 Video Distribution Amplier (RCA)

SAFETY INFORMATION

1. To ensure the best results from this product, please read this manual and all other documentation before operating your

equipment. Retain all documentation for future reference.

2. Follow all instructions printed on unit chassis for proper operation.

3. To reduce the risk of re, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid.

4. Make sure power outlets conform to the power requirements listed on the back of the unit. Keep unit protected from rain,

water and excessive moisture.

5. Do not attempt to clean the unit with chemical solvents or aerosol cleaners, as this may damage the unit. Dust with a clean

dry cloth.

6. Do not use the unit if the electrical power cord is frayed or broken. The power supply cords should be routed so that they

are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords and

plugs, convenience receptacles, and the point where they exit from the appliance.

7. Do not force switched or external connections in any way. They should all connect easily, without needing to be forced.

8. Always operate the unit with the AC ground wire connected to the electrical system ground. Precautions should be taken

so that the means of grounding of a piece of equipment is not defeated.

9. AC voltage must be correct and the same as that printed on the rear of the unit. Damage caused by connection to improper

AC voltage is not covered by any warranty.

10. Turn power off and disconnect unit from AC current before making connections.

11. Never hold a power switch in the “ON” position.

12. This unit should be installed in a cool dry place, away from sources of excessive heat, vibration, dust, moisture and cold.

Do not use the unit near stoves, heat registers, radiators, or other heat producing devices.

13. Do not block fan intake or exhaust ports. Do not operate equipment on a surface or in an environment which may

impede the normal ow of air around the unit, such as a bed, rug, carpet, or completely enclosed rack. If the unit is used

in an extremely dusty or smoky environment, the unit should be periodically “blown free” of foreign dust and matter.

14. To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Refer all

servicing to qualied service personnel. There are no user serviceable parts inside.

15. When moving the unit, disconnect input ports rst, then remove the power cable; nally, disconnect the interconnecting

cables to other devices.

16. Do not drive the inputs with a signal level greater than that required to drive equipment to full output.

17. The equipment power cord should be unplugged from the outlet when left unused for a long period of time.

18. Save the carton and packing material even if the equipment has arrived in good condition. Should you ever need to ship

the unit, use only the original factory packing.

19. Service Information Equipment should be serviced by qualied service personnel when:

A. The power supply cord or the plug has been damaged.

B. Objects have fallen, or liquid has been spilled into the equipment.

C. The equipment has been exposed to rain.

D. The equipment does not appear to operate normally, or exhibits a marked change in performance.

E. The equipment has been dropped, or the enclosure damaged.

THIS SAFETY INFORMATION IS OF A GENERAL NATURE AND MAY BE SUPERSEDED BY

INSTRUCTIONS CONTAINED WITHIN THIS MANUAL.

Produkt Specifikationer

Mærke:	Shinybow
Kategori:	Modtager
Model:	SB-3706

Har du brug for hjælp?

Hvis du har brug for hjælp til Shinybow SB-3706 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager Shinybow Manualer

Shinybow SB-5658K Manual

29 September 2025

Shinybow SB-3716 Manual

29 September 2025

Shinybow SB-5654K Manual

28 September 2025

Shinybow SB-5652K Manual

28 September 2025

Shinybow SB-2809 Manual

28 September 2025

Shinybow SB-3708 Manual

28 September 2025

Shinybow SB-3706 Manual

28 September 2025

Shinybow SB-3706BNC Manual

28 September 2025

Shinybow SB-1116 Manual

31 August 2024

Shinybow SB-3701BNC Manual

31 August 2024

Modtager Manualer

Nyeste Modtager Manualer

Insignia NS-HZ315 Manual

29 September 2025

KanexPro SP-1X8HD150M Manual

29 September 2025

AudioControl EPIC500 Manual

29 September 2025

AudioControl Epic Big Four Manual

29 September 2025

VigilLink VLSP-12CTH14 Manual

29 September 2025

RDL RU-PA518 Manual

29 September 2025

VigilLink VLSP-14CTH14 Manual

29 September 2025

VigilLink VLSP-18CTH14 Manual

29 September 2025

Kramer VM-216H Manual

29 September 2025

TOA P-906MK2 Manual

29 September 2025