Shuttle SX79R5 Manual

Shuttle barbecue SX79R5

Læs gratis den danske manual til Shuttle SX79R5 (1 sider) i kategorien barbecue. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Shuttle SX79R5, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

11. Fasten the Smart Fan to the chassis with the 4 thumbscrews.

 B1. ACPowerSocket

 B2. SerialPortPerforation

 B3. SPDIFOutPort

 B4. USB3.0Ports

 B5. eSATAPowerPort

 B6. eSATA&USB2.0Ports

 B7. ClearCMOSButton

 B8. Front-Out(L/R)Port

 B9. SideSurround(L/R)Port

B10. Surround-Back(L/R)Port

B11. Center/BassPort

B12. Line-InPort

B13. LAN&USB2.0Ports

B14. WirelessLANPerforation



  (Optional)

A. Begin Installation

1. Unscrew 3 thumbscrews of the chassis cover.

2. Slide the cover backwards and upwards.

3. Unfasten the rack mount screws and remove the rack.

B. CPU and ICE Installation

For safety reasons, please ensure that the power cord is

disconnected before opening the case.

1. Unfasten the ICE fan thumbscrews on the back of the chassis.

2. Unfasten the four ICE module attachment screws and unplug the fan

connector.

3. Remove the ICE module from the chassis and put it aside.

1. Unlock the DIMM latch.

2. Align the memory module's cutout with the DIMM slot notch.

Slide the memory module into the DIMM slot.

C. Memory module Installation

3. Check that the latches are closed, and the memory module is firmly installed.

E. Peripheral Installation

1. Unfasten expansion slot bracket screws.

Remove the back panel bracket and put the bracket aside.

F. Accessories Installation

2. Install the PCI Express p1-x16 card into the PCI Express p1-x16 slot.

3. Secure the bracket.

G. Complete

Please load the optimized BIOS values.

Fan Connector

The maximum size acceptable for display card is

267mm x 98mm x 18mm

1. Replace the cover and refasten the thumbscrews.

2. Complete.

This 2011 pin socket is fragile and easily damaged. Always use

extreme care when installing a CPU and limit the number of times

that you remove or change the CPU. Before installing the CPU,

make sure to turn off the computer and unplug the power cord

from the power outlet to prevent damage to the CPU.

CardPCB

Chassis

Cover

5mm

14.6mm

20mm

5. Connect the Serial ATA and power cables to the optical drive.

H. Install eSATA HDD

1. Take out the eSATA to SATA Cable and External SATA Power Cable

from the accessory box.

2. Plug the eSATA to SATA cable to the eSATA port and plug the External

SATA Power Cable to the eSATA power port.

3. Connect the eSATA to SATA Cable and External SATA Power Cable to

the HDD.

Serial ATA HDD

Repeat to install additional memory modules if required.

Cutout

Latch

Notch

DDR3 240-pin 1.5V

48*2=96 pin

72*2=144 pin

A DDR3 memory module has a cutout, so it can only fit in one direction.

9. Screw the ICE module to the mainboard. Note to press down on the

opposite diagonal corner while tightening each screw.

10. Connect the fan connector.

Fan Connector

4. First, release retention tab at

and

location, then lift up the metal

plate on top of CPU socket.

Follow the steps below to correctly install the CPU into the

motherboard CPU socket.

Metal load plate

Please be aware of the CPU orientation, DO NOT force the CPU into the

socket of prevent bending the pins on the socket and damaging the CPU!

5. Orientate the CPU and socket, aligning the yellow triangle on the corner

of the CPU with the triangle on the socket or you may align the CPU

notches with the socket alignment keys. Make sure the CPU is perfectly

horizontal, insert the CPU into the socket.

DO NOT touch socket contacts. To protect the CPU socket, always

replace the protective socket cover when the CPU is not installed.

2011 CPU

Triangle Pin1

Marking

on the CPU

6. Close the metal load plate, lower the CPU socket lever and lock in place.

7. Spread thermal paste evenly on the CPU surface.

Serial ATA Cable

Serial ATA Power Cable

The product’s color and specification will depend upon the actually shipping product.

Serial ATA ODD

4. Connect the Serial ATA and power cables to the HDD.

Serial ATA Cable

Serial ATA Power Cable

PCI Express p1-x16 slots

External SATA Power Cable

eSATA to SATA Cable

eSATA port

eSATA power port

B12

B5 B6 B7

B11

B14

2. Place the HDD and optical drive in the rack and secure with screws

from the side.

3. Place the rack in the chassis and refasten the rack.

1. Loosen the purse lock and separate the Serial ATA and power cables.

B13

B10

Remove the

protective

membrane

Please do not apply excess amount of thermal paste.

Thermal Paste

application area

Retention tab

Load lever

Metal load plate

8. Tear off the protective membrane from the bottom of ICE module.

Remove the protective socket mylar from the CPU socket.

53R-SX79R3-2001

2x240pinsDDR3

DIMMSlots

CPUFanconnector-FAN1

USBHeader-USB1

Center/Bass/Surround-Back/



SideSurroundPorts

Front-Out/Line-InPorts

2xLAN&4xUSB2.0Ports

PCIExpressx16Slots

X79Chipset

ATXPowerConnector

-ATX1,ATX2

ClearCMOSButton

eSATAPowerPort

AUXINConnector-CN1

LGA2011

eSATA&2xUSB2.0Ports

SPDIF-OutConnector

-SPDIF1

3.0SerialATA-SATA1,2

COMConnector-COM1

2x240pinsDDR3

DIMMSlots

PowerHeader-JP4

Fanconnector-FAN2

SafetyInformation

 ReadthefollowingprecautionsbeforesettingupaShuttleXPC.

Laser compliance statement

TheopticaldiscdriveinthisPCisalaserproduct.



Thedrive'sclassi󰘰cationlabelislocatedonthedrive.

CLASS 1 LASER PRODUCT

ＥAUTION INVISIBLELASERRADIATIONWHENOPEN.

 AVOIDEXPOSURETOBEAM.

CAUTION

Incorrectlyreplacingthebatterymaydamagethiscomputer.

ReplaceonlywiththesameorequivalentasrecommendedbyShuttle.

Disposalofusedbatteriesaccordingtothemanufacturer'sinstructions.

1=Ground

2=VCC

3=SPDIFO



CPUFanConnectors



AUXINConnector(CN1)

1=AUX-IN – Left

2=Ground

3=Ground

4=AUX-IN – Right

4321

USBHeader(USB1,USB2,USB3)

SPEED_SENSE

PWM_CTRL

+12V

Ground

FAN1/FAN2

123

1=5V_USB 2=5V_USB

3=USB A- 4=USB B-

5=USB A+ 6=USB B+

7=GND 8=GND

9=NA 10=NULL

97531

108642

S/PDIFOutPutConnector(JP3)



PowerHeader(JP4)

1=+HD_LED 2=PWR_LED

3=-HD_LED 4=

GND

5=RST_SW 6=PWR_SW

7=GND 8=GND

9=NULL 10=NA

97531

108642

J11

FrontAudioHeader(JP2)

1=MIC_L 2=GND

3=MIC_R 4=Front_Detect

5=LINE_R 6=Mic_detect

7=sense 8=NA

9=LINE_L 10=Line_Detect

97531

108642

J10



USB3.0Header(JP6)

1=5VCC 2=A_RX_N

5=A_TX_N 6=

A_TX_P

9=A_Data_P 10=OC

13=Ground 14=B_TX_P

17=B_RX_P 18=B_RX_N

3=A_RX_P 4=Ground

7=Ground 8=

A_Data_N

11=B_Data_P 12=B_Data_N

15=B_TX_N 16=Ground

19=5VCC 20=NA

10 9  8  7  6  5  4  3  2  1

11 12 13 14 15 16 17 18 19 20



COMHeader(COM1)

1=DCD 2=RXD

3=TXD 4=

DTR

5=Ground 6=DSR

7=RTS 8=CTS

9=Ring 10=NA

97531

108642



LPCHeader(JP1)

1=+12V 2=5V

5=CLK_48M 6=

CLK_33M

9=LAD3 10=LAD2

13=Ring 14=LDRQ0

17=LAD0 18=+3.3V

3=5VSB 4=SERIRQ

7=SIO_RST 8=

LFRAME

11=-12V 12=3VSB

15=SIO_PME 16=LAD1

19=GND 20=NA

1  2  3  4  5  6  7  8  9  10

11 12 13 14 15 16 17 18 19 20

1=5V

2=NA

3=Ground

4=GPIO1

5=GPIO2

CIRHeader(JP5)

 F1. 5.25”Bay

 F2. 3.5”Bay

 F3. EjectButton

 F4. OpenDoor

 F5. PowerSwitch&PowerLED

 F6. HDDLED

 F7. USB3.0Ports

 F8. USB2.0Port

 F9. MicIn

 F10.Headphone

 F11.USB2.0Port&FastCharger

F8 F9

F11

F10

FrontAudioHeader-JP2

MiniPCIeSlot

MiniPCIeslotwith

mSATAsupport

USB3.0Header-JP6

USB3.0Ports

USBHeader-

USB2,USB3

LPCHeader-JP1

2.0SerialATA-SATA3,4

CIRHeader-JP5

J11

1. Install the Mini PCIe card into the Mini PCIe slot / mSATA Slot and affix it

with screws.

D. Mini PCIe card Installation

Connect the Serial ATA

Cable to motherboard.

Metal load plate



eSATAPowerPort

1=5V

2=3.3V

3=12V

4=GND

1  2  3  4  5 

J10

MotherboardIllustration

BackPanel

SX79R5

Quick Guide

【

English

】

FrontPanel

JumperSettings

62R-SX79R0-0601 SX79R5　

English.Spanish.Korean.

Traditional Chinese.Japanese.

French. German Quick Guide

Produkt Specifikationer

Mærke:	Shuttle
Kategori:	barbecue
Model:	SX79R5
Tænd-/slukkontakt:	Ja
Vægt:	3500 g
Produktfarve:	Sort
Produkttype:	PC barebone
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Ethernet LAN-porte (RJ-45):	2
Antal USB 2.0-porte:	8
Antal USB 3.2 Gen 1 (3.1 Gen 1) type-A-porte:	4
Udgange til hovedtelefoner:	1
Ethernet LAN:	Ja
Driftstemperatur (T-T):	0 - 35 °C
Husmateriale:	Aluminium
Dimensioner (BxDxH):	216 x 332 x 198 mm
Hurtig start guide:	Ja
Operativsystem installeret:	Ingen
Lyd-output kanaler:	7.1 kanaler
Certificering:	FCC, CE, BSMI, C-Tick, RoHS, ErP Lot 6
LED-indikatorer:	HDD, Power
Effektkrav:	100 - 240 V AC
Processorserie:	Intel
Maksimal intern hukommelse:	32 GB
Mikrofonindgang:	Ja
S/PDIF-udgang:	Ja
Kompatible operativsystemer:	Microsoft Windows XP, Windows 7, Windows 8, Linux 32/64bit
Lydsystem:	Realtek ALC888S
Strøm-LED:	Ja
Antal produkter inkluderet:	1 stk
Indbygget processer:	Ingen
Netværksfunktioner:	Gigabit Ethernet
Grænseflade til lagerdisk:	Serial ATA II, Serial ATA III
Antal understøttede lagerdiske:	4
Kabinettype:	SFF
Sikkerhed:	ETL, CB, BSMI, TÜV
Kølingstype:	Aktiv
Strømforsyning:	500 W
Processor sokkel:	LGA 2011 (Socket R)
Processor litografi:	32 nm
PCI Express x16 slots:	2
Kompatibel processor serie:	Intel® Core™ i7
Bundkort chipsæt:	Intel® X79 Express
Understøttede hukommelsestyper:	DDR3-SDRAM
Antal hukommelsesstik:	4
Hukommelses slots type:	DIMM
Understøttede hukommelsesclock-hastigheder:	1066,1333,1600 MHz
LAN Kontroller:	Realtek RTL8111E
Antal SATA stik:	4
BIOS-hukommelsesstørrelse:	64 Mbit
Antal eSATA-porte:	1
RAID-niveauer:	0, 1
Antal understøttede processorer:	1
Understøttede lagerdisk størrelser:	2.5 "
Drevbåse:	1 x 5.25", 2 x 3.5"
Antal strømforsyninger:	1
Mini PCI ekspres slots:	2
Bundkort:	FX79
Køleplade inkluderet:	Ja