Sigma EF-530 DG ST Super (Nikon) Manual

Sigma Flashenhed EF-530 DG ST Super (Nikon)

Læs gratis den danske manual til Sigma EF-530 DG ST Super (Nikon) (11 sider) i kategorien Flashenhed. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Sigma EF-530 DG ST Super (Nikon), eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

ENGLISH

Thank you very much for purchasing the Sigma EF-530 DG SUPER NA-iTTL Electronic Flash. This product is

specifically developed for the Nikon SLR series cameras. Depending on the camera model, functions and

operation may vary. Please read this instruction booklet carefully. To add to your enjoyment of photography, this

flash has a variety of features. To make the most of all these features and to get the maximum performance and

enjoyment from your flash, please read this instruction booklet together with your camera’s instruction manual,

before using the flash and also keep it handy for your future reference.

PRECAUTIONS

In order to avoid causing any damage or injury, please read this instruction manual very carefully,

paying attention to the cautionary signs below, before using the flash.

Please take special note of the two cautionary signs below.

Warning !!

Caution!!

Symbol denotes the important points, where warning and caution are required.

Symbol contains information regarding the actions that must be avoided.

Using the product disregarding this warning sign might cause serious injury o

other dangerous results.

Using the product disregarding this caution sign might cause injury o

damage.

Warning !!

This flash contains high voltage circuits. To avoid electric shock or burns, do not attempt to

disassemble the flash. If the outside shell of the unit is broken or cracked, do not touch the

mechanism inside.

Do not fire the flash close to eyes. Otherwise the bright light could damage the eyes. Keep at leas

1m/3feet distance between face and the flash unit when taking a picture with flash.

Do not touch the synchro terminal of your camera when the flash is attached to a hot shoe. High

voltage circuitry could cause an electric shock.

Never use your camera in an environment where flammable, burnable, gas, liquids or chemicals,

etc, exist. Otherwise it might cause fire or explosion.

Caution !!

Do not use this flash unit on any camera other than the Nikon NA series cameras, otherwise the

flash may damage the circuitry of these cameras.

This flash unit is not waterproof. When using the flash and camera in the rain or snow or near water,

keep it from getting wet. It is often impractical to repair internal electrical components damaged by

water.

Never subject the flash and camera to shock, dust, high temperature or humidity. These factors

might cause fire or malfunctioning of your equipment.

When the flash is subjected to sudden temperature change, as when the flash unit is brought from a

cold exterior to warm interior, condensation might form inside. In such a case, place your equipment

in a sealed plastic bag before such a change, and do not use the flash unit until it reaches room

temperature.

Do not store your flash in a drawer or cupboard etc. containing naphthalene, camphor or othe

insecticides. These chemicals will have a negative effects on the flash unit.

Do not use a thinner, Benzene or other cleaning agents to remove dirt or finger prints from the

component. Clean with a soft, moistened cloth.

For extended storage, choose a cool dry place, preferably with good ventilation. It is recommended

that the flash be charged and fired several times a month to maintain proper capacitor functioning.

DESCRIPTION OF THE PARTS

EXTERNAL PARTS

1.Flash Head 2.Built-in Wide Panel 3.AF Auxiliary Light 4.Bounce Angle; Up and Down

5.Bounce Angle; Right and Left 6.Bounce Lock and Release Button; Up and Down

7.Swivel Lock and Release Button; Right and Left 8.LCD Panel 9.Battery Cover 10.Shoe Ring

11.Shoe

CONTROLS

12.MODE Button 13.<SEL> SELECT Button 14.< + > Increment Button 15.< - > Decrement Button

16.ZOOM Button 17.TEST Button 18.LIGHT Button 19.Ready Light 20.Power Switch

CAMERA MODELS AND FUNCTIONS

This flash can be used with cameras, which are given below.

D2 Series, D200, D80, D70s, D70, D50, D40X, D40, D1 Series, D100,

F6, F5, F4 Series, F3 Series(*), F100, F90X/N90S Series, F90/N90 Series, F80 Series, F75/N75,

F70D/N70, U/F65/N65, F-801S/N8008S, F-801/N8008, F601M, F60D/N60, F55/N55, F50D/N50,

F-601/N6006, F501/N2020, F401X, F

401S/N4004S, F-401/N4004, F-301,

N2000, FA, FE10, FE-2,

FG,

FM10,

New FM2,

FM3,

Nikonos V(*),

Pronea 600i (*) It is necessary to use adapter for connection.

This instruction book is used for the following lens types. (Please check your lens.)

With Built-in CPU Nikon Lenses D Type Lenses, G Type Lenses, IX Nikor Lenses, Except D type AF

lens (does not include F3AF), Ai-P type lens

Without Built-in CPU Nikon Lenses Ai-S, Ai, Series E lens

ABOUT THE BATTERY

This flash unit uses four “AA” type Alkaline dry cell batteries or Ni-Cad, Ni-MH rechargeable batteries.

Manganese batteries can also be used but as they have a shorter life than Alkaline batteries, we do not

recommend using them. Please replace batteries if it takes more than 30seconds to light the Ready Lamp.

◆ To assure proper electrical contact, clean the battery terminals before installing the batteries.

◆ NiCad batteries do not have standardized contacts. If you use NiCad batteries, please confirm that the battery

contacts touch the battery compartment properly.

◆ To prevent battery explosion, leakage or overheating, use four new AA batteries of the same type and brand.

Do not mix the type or new and used batteries.

◆ Do not disassemble or short-circuit the batteries, or expose them fire or water; they may explode. Do not

recharge the batteries other than Ni-Cd or Ni-MH rechargeable batteries.

◆ When the flash will not be used for an extended period of time, remove the batteries from the flash to avoid

the possibility of damage from leakage.

◆

Battery performance decreases at low temperatures. Keep batteries insulated when using the flash in cold weather.

◆ As with any flash, it is recommended you carry spare batteries when on a long trip or when photographing

outdoors in cold weather.

BATTERY LOADING

1. Be sure to set the Power Switch to the off position then

slide the battery cover in the direction of the arrow to

open.

2. Insert four AA size batteries into the battery chamber. Be

sure the + and – ends of the batteries are aligned

according to the diagram in the chamber.

3. Close the cover.

4. Slide the Power Switch to the ON position. After few

seconds the Ready Lamp will light, indicating that the

flash unit can be fired.

5. Please press the “Test Button” to be sure that the flash is

working properly.

Produkt Specifikationer

Mærke:	Sigma
Kategori:	Flashenhed
Model:	EF-530 DG ST Super (Nikon)

Har du brug for hjælp?

Hvis du har brug for hjælp til Sigma EF-530 DG ST Super (Nikon) stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Flashenhed Sigma Manualer

Sigma EF-530 DG ST Super Manual

20 April 2023

Sigma EF-630 Manual

8 Marts 2023

Sigma EF-610 DG ST (Sony) Manual

9 Februar 2023

Sigma EF-530 DG ST (for Canon) Manual

7 December 2022

Sigma EF-530 DG ST (for ) Manual

21 November 2022

Sigma EF-530 DG ST Super (Nikon) Manual

14 November 2022

Sigma EM-140 DG Macro (Pentax) Manual

3 November 2022

Flashenhed Manualer

Nyeste Flashenhed Manualer

Godox V860IIO Manual

31 Juli 2025

Nissin i60A Manual

30 Juli 2025

Impact SB-6080 Manual

23 Juli 2025

Aputure Amaran AL-MX Manual

22 Juli 2025

Impact VE-TTLHX32 Manual

22 Juli 2025

Vello OCS-NK15 Manual

19 Juli 2025

Angler FastBox FB-32K Manual

15 Juli 2025

Angler FastBox FB-20K Manual

15 Juli 2025

Angler FastBox FBS-36K Manual

15 Juli 2025

Angler FastBox FBS-28K Manual

15 Juli 2025