
DANGER for children and people with disabilities
~Packing materials are not children’s toys. Children must not play with the
packing material. There is a risk of suffocation.
~This device is not designed to be used by people (including children) with
limited physical, sensory or mental capabilities or people without adequate
experience and/or understanding, unless they are supervised by someone
responsible for their safety or are instructed by them on how to use the
~Children must not play with the device.
~Keep the device out of the reach of children.
~This device must not be thrown into re. ƂDANGER OF EXPLOSION!
~The device must not be covered while the battery is charged.
~The device must only be charged in a dry environment.
~The device is provided with a lithium polymer battery.
- The battery cannot be removed.
- This device must not be opened.
- Completely dispose of the device.
~Do not expose the device to direct sunshine or heat. The ambient tempera-
ture should not be lower than C. Please remember |C or higher than |
that in a car the storage temperature may signi C.Ƃcantly exceed |
~If the device is to be charged via a USB 2.0 or 3.0 computer socket, at least
one more USB 2.0 or 3.0 computer socket must be available. Unless this is
the case, the loudspeaker must not be charged.
~The battery may only be charged with the original accessory (USB charger
Bluetooth Mini Speaker SBL 3 A1
Thank you for your trust!
Congratulations on your new Bluetooth mini speaker.
For safe handling of the device and in order to get to know the entire scope of
r Thoroughly read these user instructions prior to initial use.
r Above all, observe the safety instructions!
r The device should only be used as described in these user in-
r Keep this copy of the user instructions for future reference.
r If you pass the device on to someone else, please include this
copy of the user instructions. The user instructions are a part of
We hope you enjoy your new Bluetooth mini speaker!
word mark and the Bluetooth logo (
marks of the Bluetooth SIG Inc. (Special Interest Group), any use of the trade-
mark by the Hoyer Handel GmbH is effected within the framework of a licence.
All other names and trademarks are the property of their respective owners.
This is an entertainment electronics device. The Bluetooth speaker is intended
for playing sound from audio devices via Bluetooth or using the 3. mm jack |
The device is designed for private, domestic use. This device must not be used
Do not make any changes or carry out any repairs. The manufacturer is not li-
able for damage or malfunctions caused by improper repairs or modiƂcations.
This is the sole responsibility of the user.
If necessary, the following symbols and warnings will be used in these user
DANGER! This symbol, in combination with the note “Danger” means
a high risk. Failure to observe this warning may result in injury to life
WARNING! This symbol, in combination with the note “Warning”
means a moderate risk. Failure to observe this warning may result in
injury or serious material damage.
CAUTION: low risk: failure to observe this warning may result in minor injury
NOTE: circumstances and speciƂcs that must be observed when handling the
WARNING! Risk of material damage
~If you notice any irregularities (e.g. unusual noises, strange smells or smoke
developing) turn the device off immediately and remove all cables. Do not
use the device any longer.
~If the device is moved from a cold location to a warm location, condensate
may form in the device. Leave the device switched off for a few hours to
~Protect the device against damage, e.g. from:
- drips and splashes of water
- heat, direct sun radiation and open ƃames (e.g. candles)
- impacts and similar violent effects
~Protect the cable against damage, e.g. from:
~Do not use any astringent or abrasive cleaning agents.
~To avoid any ha ard, do not make modi epairs must \ Ƃcations to the device. 4
be carried out by a specialist workshop or the Service Centre.
1 USB charger cable (Type A on micro USB)|
1 3. mm stereo jack cable| |
1 copy of the user instructions
If the delivery is incomplete or defective, please contact the responsible service
centre of the manufacturer (see “Warranty of H Handel GmbH”).1;'4
USB charger cable for micro
3. mm stereo jack cable|
Before using the device for the rst timeƂ
r 4 emove all packing material.
r 4 Ƃ emove the protective lm on the underside of the device.
r Check that the device is undamaged. A damaged device must never be used.
~The device must not be covered while the battery is charged.
~The device must only be charged in a dry environment.
r When using a USB power unit (not included in items supplied), comply with
its user instructions. The USB power unit must be able to output at least 1A
r Charge the battery fully before using the device.
r | The maximum battery capacity is reached after approx. - charging cycles.
r At a battery capacity of less than approx. 10%, an audio signal will sound
once and the charging LED
will light up red until the device automatical-
r | | The charging time of an empty battery is approx. 2-2. hours. It is possible
to play back during the charging process, however, this extends the charg-
1. Connect the micro USB plug of the USB charger cable| to the micro USB
2. Connect the USB-A plug of the USB charger cable e.g. to the USB port of |
a PC or to a USB power unit (not included in scope of supply). The charging
LED| is lit red and goes off when the battery is fully charged
NOTE: depending on the software of the mobile device it may be that not all
functions of all mobile devices are supported. This is not a device error.
r Switching on /off: press for approx. 2 sec., a brief sound
r Press brieƃy: increase the volume (audio signal at maximum
r Keep pressed: Next track
r Press brieƃy: Pause / Play
r Press brieƃy: reduce the volume (audio signal sounds at
r Keep pressed for 1x: Start of track
r Keep pressed for 2x: Previous track
r Press until a sound can be heard. The active connection is
interrupted and a new one can be built up.
Charging LED is lit red Battery is being charged / or the battery
Device sends device identiƂcation in order
to establish a Bluetooth connection (pairing)
LED ashes white very ƃ
Bluetooth connection is established
LED mm stereo jack cable is lit green The plug of the 3.| |
is plugged into the jack socket|4
Establishing a Bluetooth connection
r The identiƂcation of the loudspeaker is “SBL| |3 A1”.
r After turning it on, the loudspeaker automatically tries to reconnect to the last
paired device or to establish a new connection.
r Please observe that the establishing of the connection may vary slightly de-
pending on the audio device and the software used.
r The Bluetooth range is 10 metres.
r The loudspeaker switches off if no Bluetooth connection can be established
r With moderate volume settings, the loudspeaker can be used for a period of
approx. 1|hours with the Bluetooth connection established.
BLUETOOTH MINI SPEAKER SBL 3 A
r If you pass the loudspeaker on to someone else, in order to protect your
data and your privacy, you should disconnect the Bluetooth connection to
the device and delete it from the connection list on your smartphone.
1. If necessary, remove the plug of the 3. from the |mm stereo jack cable|
2. Switch on the loudspeaker device using the button
. The Bluetooth identiƂcation of
3. Switch on the audio device (e.g. smartphone) and start the Bluetooth
connection. The audio device will now receive the device identiƂcation
. Establish a connection to the Bluetooth speaker on the audio device. Both
devices are now interconnected. The LED ashes slowly | on the device ƃ
in white and an audio signal sounds.
NOTE: it is possible that audio devices remember the identiƂcation of the
loudspeaker. Thus it is possible that a new connection may not be have to
be established manually while the Bluetooth function is active.
5. Now play back a music track on the audio device. The sound is played
back via the loudspeaker .|5