Silverstone MS09C Manual

Silverstone Ekstern harddisk MS09C

Læs gratis den danske manual til Silverstone MS09C (2 sider) i kategorien Ekstern harddisk. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Silverstone MS09C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

M.2 SATA external SSD enclosure

with USB 3.1 Gen 2

Specifications

Package Content

MS09

Support 2260 or 2280 form factors of B key M.2 SATA SSD

Premium all aluminum exterior with small, pocketable design

Latest USB 3.1 Gen 2 interface up to 10Gb/s super speed

transfer rate

Robust USB Type-A interface and no driver installation required

Retractable USB connector design

Model No.

Color

Material

Data transfer rate

Connector

Controller

LED indicator

Support type of M.2 SSD

Operating system support

Net weight

Dimension

MS09 x 1

Screwdriver x 1

Spare outer shell screws x 2

SST-MS09C

Charcoal

Aluminum unibody shell and plate

USB 3.1 Gen 2 up to 10Gbps

(Compatible with USB 3.1 Gen 1 / 3.0 / 2.0 / 1.1)

USB Type-A

VIA VL715

Solid Blue: Powered

Blinking Blue: Reading / writing

B Key SATA Type M.2 SSD x 1

Support 22mm x 60mm or 22mm x 80mm size

Microsoft Windows 10/8.1/8/7 (32bit/64bit)

or future release version

Mac 10.8.6 or future release versions

33g ± 5g

110mm (W) x 9mm (H) x 26mm (D)

4.33" (W) x 0.35" (H) x 1.02" (D)

www.silverstonetek.com

NO: G11231870

Additional info & contacts

For North America (usasupport@silverstonetek.com)

SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.

Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All power supplies should be sent back to the

place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology in USA by first

downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only (support@silverstonetek.com)

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure

and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be

of acceptable quality and the failure does not amount to a major failure. Please refer to above “Warranty terms & conditions” for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238

(standard international call charges apply)

For Europe (support.eu@silverstonetek.de)

For all other regions (support@silverstonetek.com)

Warranty Information

This product has a limited 1 year warranty in North America, Europe, and Australia.

For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

1. Product component defects or damages resulted from defective production is covered under warranty. Defects or damages with the following conditions will be fixed

or replaced under SilverStone Technology’s jurisdiction.

a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)

c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken.

Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding shipping, handling,

and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone Technology be liable for

damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of profits, loss of use of the product or incidental

or consequential damage whether or not foreseeable and whether or not based on breach of warranty, contract or negligence, even if SilverStone Technology has been

advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand

purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone

http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping (or otherwise

transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping (or otherwise transporting) the product

back to you after completing the warranty service; (iii) Before you send the product, you must be issued a Return Merchandise Authorization (“RMA”) number from

SilverStone. Updated warranty information will be posted on SilverStone’s official website. Please visit http://www.silverstonetek.com for the latest updates.

Warranty terms & conditions

○：表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11364-2014标准规定的限量要求以下。

×：表示该有毒有害物质在该部件材料中的含量超出SJ/T11364-2014标准规定的限量要求。

有毒有害物质/元素及其化学含量表

部件名称

风扇

电子卡

线材

螺丝

包材

机壳

（金属）