Sonance MAG8R Manual

Sonance Højttaler MAG8R

Læs gratis den danske manual til Sonance MAG8R (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Sonance MAG8R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTRUCTION MANUAL

MAG8R 8” 2-WAY SPEAKERS

• The speaker’s positive post is labeled with a red dot; the

negative post is labeled with a black dot. Double-check that

you connected ampliﬁer “+” to speaker “+” and ampliﬁer “–”

to speaker “–”.

3. Make sure all the Roto-Lock clamps are retracted so that

they are tucked within the mounting hole’s border. Insert the

speaker into the hole in the ceiling. The Roto-Lock system

can accommodate a maximum ceiling material thickness of

1.25”(32mm).

4. Tighten the four screws on the front of the speaker bae.

The Roto-Lock clamps will automaticallyrotate into position

and begin clamping the speaker. When you notice resistance

on the screws the speaker has been clamped successfully.

IMPORTANT: Always use low-torque settings; NEVER

over-tighten.

NOTE: ADJUSTING THE TENSION OF THE ROTO-LOCK

CLAMPS SO THAT THE SPEAKER FRAME IS FLAT WILL

HELP ENSURE THAT THE GRILLE CONTACTS THE CEILING

ALL THE WAY AROUND THE SPEAKER FOR A PROPER FIT.

5. The micro-trim grille is held in place by several small,

powerful magnets on the speaker frame. Place the grille

against the speaker and the magnets will hold it ﬁrmly in

place. When properly installed, the grille trim should make

contact with the wall all the way around the speaker.

SPEAKER ADJUSTMENTS

Pivoting Woofer and Tweeter

Pivoting drivers allow you to direct sound towards or away

from the listening area, depending on how the speakers are

being used:

• If you’re using the speakers in stereo or as the front left/

center/right speakers in a home theater, pivot the woofer

and/or tweeter directly towards the listening area. This

will help the sound from the speakers blend into a solid

soundstage even if the speakers are widely separated.

• If you’re using the speakers as surround channel speakers

in a home theater, you can create a more diuse, spacious

surround eect by pivoting the woofer and/or tweeter

towards a wall or window, away from the listeners.

To Pivot the Tweeter:

Apply light pressure to the plastic ring around the outside

edge of the tweeter dome. Do not touch or apply pressure

to the tweeter dome itself.

To Pivot the Woofer:

Apply pressure on the outer edge of one of the tweeter

support brackets. Do not touch or apply pressure to the

woofer cone.

INTRODUCTION

Thank you for purchasing MAG8R speakers. When properly

installed your new speakers will give you years of

entertainment pleasure.

BOX CONTENTS

In-ceiling speaker box contains (2) MAG8R Speakers,

(2) paintable grilles and mounting cut-out templates.

STEREO PLACEMENT

2-Channel

• Place the left and right speakers 6 - 10 feet (1.8m – 3m)

apart, with the main listening position as close to midway

between the speakers as possible.

• In most cases pivoting the woofer of each speaker directly

towards main listening position will help maximize the

stereo soundstage.

BEFORE INSTALLATION

1. Determine the location for the speaker.

2. Perform an obstruction survey using a stud ﬁnder to be

certain that there are no studs, conduit, pipes, heating,

ducts, pocket doors or air returns in the ceiling cavity that

will interfere with the speaker. If you are unsure about

obstructions, drill a small hole in the center of the outline

and insert a coat hanger wire into the hole to feel around for

possible obstructions.

3. Mounting Space Requirements:

• 10.125” (257mm) diameter cut-out; 5.26” (134mm) depth

within the mounting cavity.

4. Position the included cut-out template where the speaker

is to be located and pencil an outline on the ceiling.

5. Cut the mounting hole using a keyhole or drywall saw and

run the speaker wires from the mounting hole to the

ampliﬁer location.

NOTE: CONSULT LOCAL BUILDING CODES BEFORE

RUNNING SPEAKER WIRES THROUGH CEILINGS.

INSTALLATION

MAG8R speakers feature an exclusive, integral Roto-Lock®

mounting system for quick mounting directly into

existing ceilings.

1. Strip .25”-.5” (6mm – 12mm) of insulation from each speaker

lead. Twist the strands or tin the exposed wire with solder

to ensure that there are no stray strands. (Stray strands that

touch each other can cause a short-circuit that can damage

the ampliﬁer.)

2. The speaker’s connector posts are spring-loaded. Push the

top of each connector post down to open the connector and

insert the exposed wires into the holes in the posts.

MAG8R

Frequency Response: 40Hz - 20kHz ±3dB

Impedance: 8 ohms nominal; 6 ohms minimum

Power Handling: 5 watts minimum, 150 watts maximum

Produkt Specifikationer

Mærke:	Sonance
Kategori:	Højttaler
Model:	MAG8R

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonance MAG8R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Sonance Manualer

Sonance Invisible Series IS10W Manual

3 Marts 2025

Sonance Visual Experience VX86 Manual

26 Februar 2025

Sonance Invisible Series IS10 Manual

26 Februar 2025

Sonance Visual Experience VX86R SST Manual

26 Februar 2025

Sonance Visual Experience VX66R Manual

26 Februar 2025

Sonance MAG8R Manual

13 Januar 2025

Sonance Visual Performance Extreme VPXT8R Manual

8 Januar 2025

Sonance Visual Performance VP38R Manual

8 Januar 2025

Sonance MAG5.1R Manual

8 Januar 2025

Sonance MAG6R Manual

8 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Teufel Boomster 4 Manual

11 Januar 2026

Ikea KULGLASS 806.049.06 Manual

11 Januar 2026

JBL SoundPoint SP5II Manual

10 Januar 2026

DS18 PRO-CUPOLA4 Manual

10 Januar 2026

LG XBOOM 360 XO2 Manual

10 Januar 2026

Kenwood eXcelon XM65TBL Manual

10 Januar 2026

DS18 PRO-X8.4BMSL Manual

10 Januar 2026

DS18 Hydro NXL-X8TPNEO Manual

10 Januar 2026

DS18 PRO-HY69.2MSL Manual

10 Januar 2026

DS18 PRO-X6.4BMSL Manual

10 Januar 2026