Sonance Visual Performance VP89R Manual

Sonance Højttaler Visual Performance VP89R

Læs gratis den danske manual til Sonance Visual Performance VP89R (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Sonance Visual Performance VP89R, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Introduction

Thank you for purchasing Sonance Visual Performance®

Series Large round or square speakers. When properly installed

your new speakers will give you years of entertainment pleasure.

Box Contents

Sonance Visual Performance Series in-ceiling speaker boxes

contain (2) Visual Performance Large round or square speakers,

(2) paint plugs (installed on the fronts of the speakers),

(2) paintable grilles and (1) mounting cut-out template.

Speaker Placement

Distributed Audio Placement (Mono signal)

All Sonance Visual Performance Series in-ceiling speaker models

provide excellent coverage in distributed audio systems from a

wide variety of installation locations.

The table and illustration in

Figure 1

show how far apart the

speakers can be placed at various ceiling heights while still

providing good coverage for all listeners.

Home Theater Speaker Placement

Left, Center & Right Speakers (see Figure 2)

• Place the left, center and right speakers 1 – 2 feet (0.3m – 0.6m)

in front of the video screen, 6 – 10 feet (1.8m – 3m) apart,

with the center channel speaker as close to midway between

the left and right speakers as possible.

• The main listening position should be 4 – 10 feet (1.2m – 2m)

away from the speakers.

Surround Speakers — 5.1-Channel System (see Figure 2)

• Locate the left and right surround speakers 2 – 6 feet (0.6m –

1.8m) behind the listening position. The speakers should be

6 – 10 feet (1.8m – 3m) apart.

Surround Speakers — 7.1-Channel System (see Figure 3)

• Left & Ri ght Surround Spe akers:

Left & Right Surround Speakers:

Left & Right Surround Speakers:Left & Right Surround Speakers: Place the left and right

surround speakers directly to the sides of the listening position,

6 –10 feet (1.8m – 3m) apart.

• Surround Back Speakers:

Surround Back Speakers:

Surround Back Speakers:Surround Back Speakers: Place the surround back speakers

2 – 6 feet (0.6m – 1.8m) behind the listening position. The

surround back speakers should be closer together than the left

and right surround speakers, 3 – 6 feet (0.9m – 1.8m) apart.

I N S T A L L A T I O N M A N U A L

V I S U A L P E R F O R M A N C E ® S E R I E S

L A R G E R O U N D A N D

S Q U A R E S P E A K E R S

S W :AFETY ARNING

THESE SPEAKERS HAVE AST OUNTF M ® TABS THAT PREVENT THE

SPEAKER FROM FALLING OUT OF THE MOUNTING HOLE DURING THE

INSTALLATION PROCESS.

T F MHE EDGES OF THE AST OUNT TABS ARE VERY SHARP.

U SE CAUTION WHEN HANDLING THE SPEAKER.

3' – 6'

(0.9m – 1.8m)

Apart

2' – 6'

(0.6m – 1.8m)

Less than 2’ (0.6m)

Surround

Back

Speakers

Left, Center

& Right

Speakers

Left & Right

Surround Speakers

6'– 10'

(1.8m – 3m)

Apart

1'– 2'

(0.3m – 0.6m)

F H T S PIGURE 3: 7.1-CHANNEL OME HEATER PEAKER LACEMENT

6'– 10'

(1.8m – 3m)

Apart

6'– 10'

(1.8m – 3m)

Apart

1'– 2'

(0.3m – 0.6m)

Left, Center

& Right

Speakers

Less than 2’ (0.6m) 2' – 6'

(0.6m – 1.8m)

Left & Right

Surround

Speakers

F H T S PIGURE 2: 5.1-CHANNEL OME HEATER PEAKER LACEMENT

OVERAGE

REA

OVERAGE

REA

PEAKER

PACING

PEAKER

PACING

(

FEET

)

FOR

ISTRIBUTED

UDIO

YSTEM

TANDING

ISTENER

EATED

ISTENER

10-

OOT

EILING

12-

OOT

EILING

14-

OOT

EILING

OOT

EILING

9.5’ (2.9m) Apart

13.5’ (4.1m) Apart

17.5’ (5.3m) Apart

21.5’ (6.6m) Apart

5.7’ (1.7m) Apart

9.7’ (3.0m) Apart

13.7’ (4.2m) Apart

17.7’ (5.4m) Apart

F A S SIGURE 1: DISTRIBUTED UDIO PEAKER PACING

SONANCE VISUAL PERFORMANCE®LARGE ROUND AND SQUARE

Stereo Placement (2-Channel)

• Place the left and right speakers anywhere from 6 feet to 10

feet apart, with the main listening position as close to midway

between the speakers as possible.

• In most cases pivoting the woofer and/or midrange/tweeter

assembly of each speaker directly towards the main listening

position will help maximize the stereo soundstage.

Use the Left and Right speaker placement in

Figures 2

and

, on

page 1, as a guide.

Before Installation

1. Determine the location for the speaker (see

Speaker Placement

on page 1).

2. Perform an obstruction survey to be certain that there are no

studs, conduit, pipes, heating ducts, pocket doors or air returns

in the ceiling cavity that will interfere with the speaker.

3. Mounti ng space requirem en ts:

Mounting space requireme nts:

Mounting space requireme nts:Mounting space requireme nts:

• Large round speakers: 101

/8” (257mm) diameter cut-out;

57/8” (149mm) mounting depth.

• Large square speakers: 10¼” x 10¼” (260mm x 260mm)

cut-out; 5 7/8” (149mm) mounting depth.

4. Position the included cut-out template where the speaker is to

be located and pencil an outline on the ceiling. If you are

unsure about obstructions, drill a small hole in the center of

the outline and insert a coat hanger wire into the hole to feel-

around for possible obstructions.

5. Cut the mounting hole using a keyhole or drywall saw, and run

the speaker wires from the mounting hole to the amplifier

location.

NOTE : CONSU LT LOCAL BUILDING CODES BEFORE RUNNING

SPEAKER WIRES THROUGH CEILINGS.

Installation

Sonance Visual Performance Series speakers feature exclusive

FastMount tabs and an integral Roto-Lock®mounting system for

quick mounting directly into existing ceilings.

WARNING: THE EDGES OF THE FASTMOUNT TABS

ARE VERY SHARP. USE CAUTION WHEN HANDLING

THE SPEAKER.

1. Remove the paint plug from the speaker.

2. Strip ¼” – ½” (6mm – 12mm) of insulation from each speaker

lead. Twist the strands or tin the exposed wire with solder to

ensure that there are no stray strands. (Stray strands that touch

each other can cause a short-circuit that can damage the

amplifier.)

3. The speaker’s connector posts are spring-loaded. Push the top

of each connector post down to open the connector and insert

the exposed wires into the holes in the posts.

The speaker’s positive post is labeled with a red dot; the

negative post is labeled with a black dot. Double-check that

you connected amplifier “+” to speaker “+” and amplifier “–”

to speaker “–”.

4. Make sure all the

RotoLock clamps are

retracted so that

they are tucked within

the mounting hole’s bor-

der. Insert the speaker

into the hole in the ceil-

ing (

Figure 4

). The

RotoLock system can

accommodate a maxi-

mum ceiling material

thickness of 1¼”

(32mm).

The FastMount tabs

will prevent the speak-

er from falling out of

the mounting hole,

allowing you to let go

of the speaker to pick-

up tools or other items

(

Figure 5

N F MOTE : THE AST OUNT

TABS ARE DESIGNED FOR

ONE TIME USE ONLY- . IF

THE SPEAKER IS REMOVED

F R OM TH E M O U N T I N G

HOLE THE ASTF MOUNT

TABS WILL DISCONNECT

AND REMAIN INSIDE THE

CEILING.

5. Tighten the four screws

on the front of the

speaker baffle. The

Roto-Lock clamps will

automatically rotate

into position and begin

clamping the speaker

(

Figure 6

When you notice

resistance on the

screws the speaker

has been clamped

successfully.

I M P O R T A N T :

Always use low-

torque settings;

NEVER over-tighten.

N ROTE : ADJUST THE TENSION OF THE OTO-LOCK CLAMPS SO

THAT THE SPEAKER FRAME IS FLAT. THIS WILL HELP ENSURE THAT

THE GRILLE CONTACTS THE CEILING ALL THE WAY AROU ND THE

SPEAKER FOR A PROPER FIT.

FastMount Tabs

Roto-Lock Clamps

(retracted)

F SIGURE 4: INSERTING THE PEAKER

INTO THE OUNTING OLEM H

F 5:IGURE

FAST OUNTM TABS

Roto-Lock Screws

F 6:IGURE

T IGHTENING THE ROTOLOCK CREWSS

Produkt Specifikationer

Mærke:	Sonance
Kategori:	Højttaler
Model:	Visual Performance VP89R

Har du brug for hjælp?

Hvis du har brug for hjælp til Sonance Visual Performance VP89R stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Sonance Manualer

Sonance Invisible Series IS10W Manual

3 Marts 2025

Sonance Visual Experience VX86 Manual

26 Februar 2025

Sonance Invisible Series IS10 Manual

26 Februar 2025

Sonance Visual Experience VX86R SST Manual

26 Februar 2025

Sonance Visual Experience VX66R Manual

26 Februar 2025

Sonance MAG8R Manual

13 Januar 2025

Sonance Visual Performance Extreme VPXT8R Manual

8 Januar 2025

Sonance Visual Performance VP38R Manual

8 Januar 2025

Sonance MAG5.1R Manual

8 Januar 2025

Sonance MAG6R Manual

8 Januar 2025

Højttaler Manualer

Nyeste Højttaler Manualer

Muse M-968 BTY Manual

1 August 2025

Grundig Portable 360 Manual

1 August 2025

Grundig Band 360 Manual

1 August 2025

Grundig GBT Connect 360 Manual

1 August 2025

Muse M-968 BTR Manual

31 Juli 2025

JLab Epic Party Manual

31 Juli 2025

JVC XS-E423 Manual

30 Juli 2025

SoundTube RF31-EZ-T Manual

30 Juli 2025

Valcom VIP-480AL-W-SA Manual

30 Juli 2025

Rockustics StoneHenge II-S/T Manual

30 Juli 2025