Sony RM-VZ220 Manual

Sony Fjernbetjening RM-VZ220

Læs nedenfor 📖 manual på dansk for Sony RM-VZ220 (2 sider) i kategorien Fjernbetjening. Denne guide var nyttig for 12 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
4-170-642- (1)41
Remote Commander
RM-VZ220
©2016 Sony Corporation Printed in China
Operating Instructions
Manual de instrucciones (parte posterior)
English
For the Customers in the U.S.A.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
You are cautioned that any changes or modifications not expressly approved in this
manual could void your authority to operate this equipment.
Setting Up the RM-VZ220
The RM-VZ220 is preset at the factory to operate Sony brand video devices
set to any of the Device Select buttons (see the table below).
To use with non-Sony devices, or Sony devices that are not preset at the
factory, set the manufacturer’s code for each device.
Devices Button Factory setting*
TV TV Sony TV (00810)
TV, Cable set top box, Satellite
receiver, IPTV, DVD player, DVD
recorder, Blu-ray Disc player, DVR
(digital video recorder), PVR
(personal video recorder), VCR,
DVD Home Theater
CBL (SAT) Cable set top box (non-
Sony) (51376)
VCR Sony VCR (60032)
DVD Sony DVD player
(11033)
* The five-digit code is the preset manufacturer’s code.
Note
Only a TV can be assigned to the Device Select button. You can assign any device to TV
the other Device Select buttons.
Installing the batteries
Slide open the battery compartment and insert two size AA (R6) dry
batteries (not supplied).
Insert the batteries (negative end first) through the guide clamp within each
compartment as shown below.
1 2
Battery life
Under normal conditions, size AA (LR6) alkaline batteries will last up to one
year. If the RM-VZ220 does not operate properly, the batteries might be
drained. Replace both batteries with new ones.
Notes

Replace the batteries within 2 minutes after removing them, and do not press any
button when replacing the batteries. Otherwise, your code settings may be cleared.

Do not use an old battery with a new one, or mix different types of batteries together.

If the electrolyte inside the battery should leak, wipe the contaminated area of the
battery compartment with a cloth and replace the old batteries with new ones. To
prevent electrolyte from leaking, remove the batteries when you plan not to use the
RM-VZ220 for a long period of time.
Specifications
Operating distance Approx. 11 m (36 ft) (varies depending on devices of
different manufacturers)
Power requirements Two size AA (R6) dry batteries (not supplied)
Battery life Approx. 1 year when using size AA (LR6) alkaline batteries
(varies depending on frequency of button use - up to approx.
300 times per day.)
Dimensions Approx. 53 × 213 × 27 mm (2 1/8 × 8 1/2 × 1 1/8 in.)
(w/h/d)
Mass Approx. 100 g (3.5 oz) (not including batteries)
Design and specifications are subject to change without notice.
Troubleshooting
If you have problems setting up or using the RM-VZ220:

Carefully perform the setup procedure of “Startup Guide.” If the RM-VZ220 does not
work, try repeating the setup procedure using another manufacturer’s code (if listed
for your device). If you still cannot operate the RM-VZ220, try the Search function
(see “Searching for the correct code”).

Aim the RM-VZ220 directly at the device.

Remove any obstacles in the path between the RM-VZ220 and the device.

Make sure you have pressed the correct Device Select button.

Check that the device has infrared remote capability. For example, if your device did
not come with a remote control, it probably is not capable of being controlled by the
RM-VZ220.

The batteries are weak, or not inserted correctly. Replace them with new ones or insert
them correctly.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the RM-VZ220 to work
properly, call the Sony Customer Support Helpline at
1-800-822-2217.
Startup Guide This guide shows you how to set up and use the RM-VZ220 to operate your devices.
If your Sony device has already been preset, see Operate the device.
Set the manufacturer’s code
Example: To set up a Philips TV
1 Find the manufacturer’s code in “Manufacturer’s Code List.
0
ble
be
Manufacturer ’s Code List /
List a de có digos del fa bricante
En g li s h
Th e following tables sh ow brand names ( ) and th eir corresponding Bran d
code numbers ( ).Cod e No.
1 Press and hold for more th an 3 seconds.SET
Th e indicator li ghts u p.SET
Whi le keep ing held down, pres s th e desir ed Device Select but ton, SET
th en releas e both butt ons.
2 Enter th e manufacturer ’s code.
Th e indicator flas hes thr ee times and tur ns off.SET
Es p añ o l
La sigui ente tabla mues tra los nombres de las marcas ( ) y el número Br and
de código correspondie nte ( ).Cod e No.
1 Presi one y mantenga pres ionado el botón durante más de 3 segundos.SET
Se encenderá l a luz indi cadora .SET
Mientr as tiene pr esionado el botón , pr esione el botón de sel ección de SET
dis positivo deseado y luego suel te ambos botones.
2 Ingrese el código del fabri cante.
El indi cador par padeará tr es veces y se apagará.SET
Br an d Cod e No .
Acer 01339
Action 00650
Admiral 00463
A kai 00812, 01675, 00702, 02232
Akir a 01733
AOC 01365, 01589
Apex Digital 00748
A ventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions 01447
Crosley 00054
Curtis 02352
Curtis M athes 00054, 00154, 00702, 01661
Daew oo 01661
Digital Li festyles 01765
Durabrand 00463, 00171
Dyn ex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emer son 01864, 00154, 00463, 00171,
01661, 01394
Em prex 01765
En vision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Har man/Kar don 00054
H isense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Inf inity 00054
Insignia 01564, 00171, 02049
J BL 00054
J CB 00000
JVC 00731, 01253, 01601, 01774
K DS 01687
Kolin 01331
LG 01423, 02358
L XI 00054, 00154, 00156
M AG 01687
M agnavox 01454, 01866, 00054, 01254,
01365, 02372
Mar antz 00054
M atsushita 00650
M axent 01755
Memorex 00154, 00463, 00150
M GA 00150
Midland 00051
Br an d Cod e No .
Mitsubishi 01250, 00150, 00836
N AD 00156
NEC 01797
NetT V 01755
N orcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PAR K 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pi oneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Pr oscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R adioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sam po 01755
Sam sung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
T atung 01756
T CL 02403, 02429
Technic s 00051
Techwood 00051
Teknika 00054, 00150
Telef unken 00702
Toshiba 01524, 00154, 00156, 00650
T VS 00463
V enturer 01865
V ideocon 01540, 01541, 02436
Vidikron 00054
Vi ewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
T V / T V
Br an d Cod e No .
W ards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zen ith 00463, 01661
Br an d Cod e No .
A ccurian 10675
A kai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineV ision 10869
Citizen 10695
CyberHome 11024
Daew oo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emer son 10591, 10675
En terprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Har man/Kar don 11229
Hitachi 10573, 10664
H iteker 10672
Insignia 10675, 12428, 12596
Integr a 11769, 10627, 12147
JVC 10623, 10867, 11164
K enwood 10490
LG 10591, 10741, 10869
M agnavox 10503, 10539, 10646, 10675,
11354
Mar antz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
N AD 10741, 12572
Olevia 12331
On kyo 10503, 11769, 10627, 11627,
12147
Br an d Cod e No .
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pi oneer 10142, 10631, 11571, 12442
Polk Audio 10539
P residian 10675
Pr oscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Sam sung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
T CL 12587
Technic s 10490
T ivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
U rban Concepts 10503
Viore 12553
Vizio 12563
Vtr ek 12587
Xbox 10522, 12083
Yam aha 10490, 10539, 10497, 10817,
12298
Zen ith 10503, 10591, 10741, 10869
DV D p layer / R epr o duc to r de DVD
Br an d Cod e No .
A ccurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
M agnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Br an d Cod e No .
Pi oneer 10631
RCA 10522
Sam sung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zen ith 10741
DV D r eco r de r / G ra ba do ra de DV D
Blu- ra y Dis c/HD- DV D p laye r/
Re pr od uct o r d e B lu-r ay D isc/HD -D VD
Br an d Cod e No .
Denon 12258
Insignia 10675, 12428, 12596
Integr a 11769, 12147
LG 10741
M agnavox 10675
Mar antz 12414, 12432
Microsoft 12083
N AD 12572
Olevia 12331
On kyo 11769, 12147
Oppo 12545
Panasonic 11641
Br an d Cod e No .
Philips 12084, 12434
Pi oneer 10142, 12442
RCA 11769
Sam sung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yam aha 12298
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
TV / TV
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
El b d
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
R di Sh k
If your device is not listed, try the Search function (see “Searching for the correct code”).
2 Press and hold for more than 3 seconds.SET
The indicator lights up.SET
While keeping held down, press SET
the desired , Device Select button
then release both buttons.
3 Enter the manufacturers code (01454).
The indicator flashes three times and SET
turns off.
Operate the device
1 Aim the RM-VZ220 directly at the device.
2 Press the Device Select button for the
device you want to operate.
3 Press POWER to turn on the device.
4 Press buttons on the RM-VZ220 to check that they function.
See “Remote Button Descriptions” for the functions of buttons for each device.
If the RM-VZ220 does not seem to be working…
Check that you have set the correct manufacturers code.
Try repeating the setup procedure using another manufacturer’s code (if listed for your device).
If you still cannot operate the RM-VZ220 after trying all the listed codes, try the Search function (see “Searching
for the correct code”).
Notes

If the setting is incomplete,
the indicator flashes once SET
and the indicators turn off.
Start again from the
beginning.

If no operations are
performed for 10 seconds
while setting, the setting will
be canceled, and must be
restarted.

To cancel the process, press
SET SET any time. The
indicator turns off.
SET
POWER
Device
Select
buttons
Number
buttons
The indicator SET
lights up.
Searching for the correct code
You can set the manufacturers code using the Search function.
1 Power on the device with its power switch.
2 Aim the RM-VZ220 at the device you want to set.
3 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
4 Enter using the number buttons. 9 - 2 - 2
The indicator flashes three times.SET
5 Press and hold to start searching.
When the device turns off, release the button.
If you overshoot the required code, you can search for the next or previous
code using the or button.
6 Press .
The indicator flashes three times and turns off.SET
7 Check if the code number works correctly (see “Remote Button
Descriptions”).
If you still cannot operate the device, repeat steps to search for another
code that works for most functions of your device.
Checking the manufacturer’s code you have set
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
2 Enter using the number buttons. 9 - 3 - 3
The indicator flashes three times.SET
3 Press .
4 When the indicator starts flashing, count the number of flashes. SET
Short flash(es) indicate which digit (first, second, etc.), followed by long
flash(es) to indicate the digit number (i.e., 2 long flashes represent the
number 2). “0” is indicated by rapid flashing.
Determine the 5-digit code number this way. To recheck, press .
5 Press to finish.SET
Clearing the automatic power-on control (Sony
devices only)
The Device Select buttons are preset to automatically turn on a device when
pressed.
To cancel the function:
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press , then release both buttons.SET
2 Enter using the number buttons. 9 - 7 - 7
The indicator flashes three times.SET
3 Press the desired Device Select button.
The indicator flashes three times and turns off.SET
To set the function again, perform the same procedure above.
Restoring the factory settings
You can clear all the settings and reset the RM-VZ220 to its factory settings.
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press , then release both buttons.SET
2 Enter using the number buttons. 9 - 0 - 0
The indicator flashes three times. SET
To cancel, press any button except .
3 Press .
The indicator flashes three times and turns off.SET
Remote Button Descriptions
General

SET: Press to set up the RM-VZ220. The indicator lights or flashes while
setting.

Device Select buttons: Press to select the device to operate.

GUIDE: Displays the program guide (EPG).
 //// : Moves the cursor to select a menu item/enters the selected item.

RETURN: Returns to the previous display/exits the menu.

VOL +/–: Turns the volume up/down.

POWER: Turns the selected device on and off.

MUTING: Mutes the volume. Press again to turn muting off.

SLEEP: Enables the Sleep function (when available).
The number , , and buttons each have a tactile dot for ease of use.5 CH+
The and buttons do not work for a VCR.GUIDE RETURN
Note on the VOL+/– and MUTING buttons
When a TV or other video device is selected, the TV’s volume is controlled. When a
DVD Home Theater is selected, its volume can be controlled.
TV

: VIDEO 1 input
: VIDEO 2 input
: HDMI input
: RGB input
: (PIP INPUT) Changes the
input mode of the “window”
picture.
: (PIP) Turns the “window”
picture on and off.
: (PIP MOVE) Moves the
location of the “window” picture.
: (PIP STILL) Freezes the
“window” picture.
: (PIP SWAP) Switches between
“main” and “window” picture.

A: Red button
B: Green button
C: Yellow button
D: Blue button

LIST: (CAPTION) Displays closed
captioning.

MENU: Calls up the menu display.

INPUT: Changes the input mode.
 1 – 9, 0, ENTER , (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).

PAGE +/: (PIP CH +/–) Changes
the channel up/down in the
“window” picture.

FAVORITES: Enables the Favorite
function.

INFO: Displays program
information.

OPTIONS: Displays the options
menu.

RECALL: Selects the channel
previously selected.

CH +/–: Switches the channel up/
down.
Cable set top box/IPTV

: Proceeds to the previous
location.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
: Fast reverses.
: Plays.
: Fast forwards.
: Records.
: Pauses.
: Stops.

A, B, C buttons
D: (Live TV) Displays Master
Guide.

LIST: Displays the title of recorded
program.

MENU: Calls up the menu display.

INPUT: Changes the input mode.
 , 1 – 9, 0, ENTER (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).

PAGE +/: Page up/down

FAVORITES: Enables the Favorite
function.

INFO: Displays program
information.

OPTIONS: Displays the options
menu.

RECALL: Switches between the
current and previous channel.

CH +/–: Switches the channel up/
down.
Satellite receiver

: Proceeds to the previous
location.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
: Fast reverses.
: Plays.
: Fast forwards.
: Records.
: Pauses.
: Stops.

A: Red button
B: Green button
C: Yellow button
D: Blue button

LIST: Displays the title of recorded
program/PVR menu.

MENU: Calls up the menu display.

INPUT: (TV/SAT) Switches the
output between SAT and TV.
 , 1 – 9, 0, ENTER (dot):
Changes the channel. For example,
to change to channel 5, press 0 and
5 (or, press 5 and ENTER).

PAGE +/: Page up/down

FAVORITES: Enables the Favorite
function.

INFO: Displays program
information.

OPTIONS: Displays the Satellite
dish menu/Station Index.

RECALL: Tunes to the last tuned
station.

CH +/–: Switches the channel up/
down.
VCR

: Rewinds.
: Plays.
: Fast forwards.
: Records.
: Pauses.
: Stops.

INPUT: Changes the input mode.

1 – 9, 0: Number buttons
: Ejects a tape.

INFO: (DISPLAY) Displays the
playback information.

OPTIONS: (ANT/SW) Switches
the antenna output.

RECALL: (DRIVE SELECT) Selects
the deck.

CH +/–: Switches the channel up/
down.

ENTER: Enters the selected item.
DVD player/recorder

: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
: Fast reverses.
: Plays.
: Fast forwards.
: Records (for DVD recorder).
: Pauses.
: Stops.

A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.

LIST: Displays the Title List.

MENU: Displays the DVD menu.

INPUT: Changes the input mode.

1 – 9, 0: Number buttons

(dot): (+10) Selects numbers 10
and above.
: Opens/closes the disc tray.

PAGE +: (DVD) Selects the DVD
drive.
PAGE –: (HDD) Selects the
internal HDD (hard disk drive).

FAVORITES: (TOP MENU)
Displays the Top Menu.

INFO: (DISPLAY) Displays the
playback information.

OPTIONS: Displays the options
menu.

RECALL: (DRIVE SELECT)
Switches between HDD and DVD.

CH +/–: Switches the channel up/
down (for DVD recorder).

ENTER: Enters the selected item.
Blu-ray Disc/HD-DVD player

: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
: Fast reverses.
: Plays.
: Fast forwards.
: Records (for BD recorder).
: Pauses.
: Stops.

A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.

MENU: Displays the Pop-up Menu/
Disc Menu.

INPUT: Changes the input mode.

1 – 9, 0: Number buttons

(dot): (+10) Selects numbers 10
and above.

: Opens/closes the disc tray.

PAGE +: (BD) Selects the BD drive.
PAGE –: (HDD) Selects the
internal HDD (hard disk drive).

FAVORITES: (TOP MENU)
Displays the Top Menu.

INFO: (DISPLAY) Displays the
playback information.

OPTIONS: Displays the options
menu.

ENTER: Enters the selected item.
DVR (digital video recorder)/PVR (personal video recorder)

: Proceeds to the previous
location.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Proceeds to the next location.
: Fast reverses.
: Plays.
: Fast forwards.
: Records.
: Pauses.
: Stops.

A: (REPLAY ) Enables the Replay *
function for DVR/Replay TV.
B: (Live TV ) Displays Master *
Guide.

LIST: Displays the title of recorded
program.

MENU: Calls up the menu display.

INPUT: Changes the input mode.

1 – 9, 0: Number buttons

(dot): (+10) Selects numbers 10
and above.

: Opens/closes the disc tray.

PAGE +/: Page up/down,
Thumbs up/down*

INFO: (DISPLAY) Displays the
playback information.

RECALL: Selects the channel
previously selected.

CH +/–: Switches the channel up/
down.

ENTER: Enters the selected item.
* These buttons correspond to TiVo
service or the Replay service. Refer to
its instruction manual for details.
DVD Home Theater

: Skips to the previous
chapter/track.
: Briefly replays the scene
(Flash –).
: Briefly fast forwards the
scene (Flash +).
: Skips to the next chapter/
track.
: Fast reverses.
: Plays.
: Fast forwards.
: Records.
: Pauses.
: Stops.

A: (SET UP) Calls up the system/
setup menu.
B: (SUBTITLE) Switches the
subtitle.
C: (AUDIO) Changes the sound.
D: (CLEAR) Clears the setting.

LIST: Enables the SOUND FIELD
function.

MENU: Displays the DVD menu.

INPUT: Changes the input mode.

1 – 9, 0: Number buttons

(dot): (+10) Selects numbers 10
and above.
: Opens/closes the disc tray.

FAVORITES: (TOP MENU)
Displays the Top Menu.

INFO: (DISPLAY) Displays the
playback information.

OPTIONS: Displays the amplifier
menu.

RECALL: (BAND) Selects FM/AM.

CH +/–: Presets or tunes frequency
up/down.

ENTER: Enters the selected item.
Notes on using the RM-VZ220

The RM-VZ220 will not perform functions that the device is not designed for. For
example, if your TV does not have the muting function, on the RM-VZ220 MUTING
will not function with your TV.

The function of the buttons varies depending on settings/operating modes. The table
of “Remote Button Descriptions” shows how the RM-VZ220 generally operates for
each device in the preset mode.

If your cable set top box can control volume, be sure to set its volume to a moderate
level. If the volume on the cable set top box is turned down completely, you will not be
able to adjust your TVs volume with the RM-VZ220.
Manufacturers Code List /
Lista de códigos del fabricante
English
The following tables show brand names (Brand) and their corresponding
code numbers (Code No.).
1 Press and hold for more than 3 seconds. SET
The indicator lights up. SET
While keeping held down, press the desired Device Select button, SET
then release both buttons.
2 Enter the manufacturers code.
The indicator flashes three times and turns off.SET
Español
La siguiente tabla muestra los nombres de las marcas (Brand) y el número
de código correspondiente (Code No.).
1 Presione y mantenga presionado el botón durante más de 3 segundos. SET
Se encenderá la luz indicadora . SET
Mientras tiene presionado el botón , presione el botón de selección de SET
dispositivo deseado y luego suelte ambos botones.
2 Ingrese el código del fabricante.
El indicador parpadeará tres veces y se apagará.SET
Brand Code No.
Acer 01339
Action 00650
Admiral 00463
Akai 00812, 01675, 00702, 02232
Akira 01733
AOC 01365, 01589
Apex Digital 00748
Aventura 00171
Bell & Howell 00154
BPL 01543
Broksonic 00463
Carver 00054
Celebrity 00000
Coby 02306, 02345, 02348
Commercial
Solutions
01447
Crosley 00054
Curtis 02352
Curtis Mathes 00054, 00154, 00702, 01661
Daewoo 01661
Digital Lifestyles 01765
Durabrand 00463, 00171
Dynex 01463, 01810, 02049
Electroband 00000
Electrograph 01755
Electrohome 00463
Elektra 01661
Element 01687
Emerson 01864, 00154, 00463, 00171,
01661, 01394
Emprex 01765
Envision 01365, 01589
ESA 00812, 00171
Fisher 00154
Funai 00171
Gateway 01755, 01756
GE 01447, 00051, 02359
GFM 00171
Haier 01748, 01749, 02309, 02449
Harman/Kardon 00054
Hisense 00748, 01314, 02098
Hitachi 01643, 02215, 02433
iLo 01684
Infinity 00054
Insignia 01564, 00171, 02049
JBL 00054
JCB 00000
JVC 00731, 01253, 01601, 01774
KDS 01687
Kolin 01331
LG 01423, 02358
LXI 00054, 00154, 00156
MAG 01687
Magnavox 01454, 01866, 00054, 01254,
01365, 02372
Marantz 00054
Matsushita 00650
Maxent 01755
Memorex 00154, 00463, 00150
MGA 00150
Midland 00051
Brand Code No.
Mitsubishi 01250, 00150, 00836
NAD 00156
NEC 01797
NetTV 01755
Norcent 00748, 01365, 01589
Olevia 01610, 01144, 01331
Onida 01253, 02396
Optimus 00154, 00650
Orion 00463, 01463
Panasonic 01480, 00051, 00650
PARK 02104
Penney 00156, 00051
Petters 01523
Philco 00054
Philips 01454, 00054, 00690, 01744,
02372
Pioneer 01457, 01260
Polaroid 01523, 01276, 01314, 01687
Portland 01661
Prism 00051
Proscan 01447, 02147, 02256
Proview 01687
Quasar 00051, 00650
RadioShack 00154
RCA 01447, 01781, 02187, 02247,
02403, 02429, 02434
Realistic 00154
Sampo 01755
Samsung 00812, 00702
Sansui 00463
Sanyo 00154, 01142
Sceptre 01360, 01599
Scott 01711
Sears 00054, 00154, 00156, 00171
Sharp 00818
Sony 00810, 00000
Spectroniq 01687
Squareview 00171
Superscan 00864
Supreme 00000
SVA 00748
Sylvania 01864, 00054, 00171, 01314,
01394
Symphonic 00171
Syntax 01610, 01144, 01331
Tatung 01756
TCL 02403, 02429
Technics 00051
Techwood 00051
Teknika 00054, 00150
Telefunken 00702
Toshiba 01524, 00154, 00156, 00650
TVS 00463
Venturer 01865
Videocon 01540, 01541, 02436
Vidikron 00054
Viewsonic 01755, 00864, 00885, 01627,
01742
Viore 01684, 02104, 02352
Vizio 01758, 00864, 00885, 01756
VU 02098
TV / TV
Brand Code No.
Wards 00054
Waycon 00156
Westinghouse 01712, 00885, 01577
White
Westinghouse
00463, 01661
Wyse 01365
Zenith 00463, 01661
Brand Code No.
Accurian 10675
Akai 10695
Allegro 10869
Apex Digital 10672, 11056
Bel Canto Design 11571
Broksonic 10695
CineVision 10869
Citizen 10695
CyberHome 11024
Daewoo 10869
Denon 10490, 11634, 12258
Disney 10675, 11270
Emerson 10591, 10675
Enterprise 10591
Funai 10675
GE 10522
GFM 10675
Go Video 10744, 10741, 10869, 11044,
11075
GoldStar 10741
Harman/Kardon 11229
Hitachi 10573, 10664
Hiteker 10672
Insignia 10675, 12428, 12596
Integra 11769, 10627, 12147
JVC 10623, 10867, 11164
Kenwood 10490
LG 10591, 10741, 10869
Magnavox 10503, 10539, 10646, 10675,
11354
Marantz 10539, 12414, 12432
Memorex 10695, 11270, 12213
Microsoft 10522, 12083
Mitsubishi 11521
NAD 10741, 12572
Olevia 12331
Onkyo 10503, 11769, 10627, 11627,
12147
Brand Code No.
Oppo 10575, 12545
Panasonic 10490, 11579, 11641
Philco 10675
Philips 10503, 10539, 12056, 12084,
10646, 10675, 11267, 11354,
12434
Pioneer 10142, 10631, 11571, 12442
Polk Audio 10539
Presidian 10675
Proscan 10522
RCA 10522, 11769, 10822, 12213,
12587, 12592, 12594
Rio 10869
Rotel 10623
Samsung 10490, 10573, 10199, 11044,
11075, 12329, 12489
Sansui 10695
Sanyo 10695
Sharp 10630, 10675, 12250
Shinsonic 10533
Sonic Blue 10869
Sony 11633, 10533, 10864, 11033,
11070, 11431, 11516
Sylvania 10675
Symphonic 10675
TCL 12587
Technics 10490
Tivo 11503
Toshiba 10503, 11769, 10695, 11154,
11503, 12006, 12277
Urban Concepts 10503
Viore 12553
Vizio 12563
Vtrek 12587
Xbox 10522, 12083
Yamaha 10490, 10539, 10497, 10817,
12298
Zenith 10503, 10591, 10741, 10869
DVD player / Reproductor de DVD
Brand Code No.
Accurian 10675
Apex Digital 11056
Funai 10675
Go Video 10741
JVC 11164
LG 10741
Magnavox 10646, 10675
Panasonic 10490, 11579
Philips 10646
Brand Code No.
Pioneer 10631
RCA 10522
Samsung 10490
Sharp 10675
Sony 11033, 11070, 11431
Sylvania 10675
Toshiba 12277
Zenith 10741
DVD recorder / Grabadora de DVD
Blu-ray Disc/HD-DVD player/
Reproductor de Blu-ray Disc/HD-DVD
Brand Code No.
Denon 12258
Insignia 10675, 12428, 12596
Integra 11769, 12147
LG 10741
Magnavox 10675
Marantz 12414, 12432
Microsoft 12083
NAD 12572
Olevia 12331
Onkyo 11769, 12147
Oppo 12545
Panasonic 11641
Brand Code No.
Philips 12084, 12434
Pioneer 10142, 12442
RCA 11769
Samsung 10199
Sharp 12250
Sony 11516
Sylvania 10675
Toshiba 11769
Viore 12553
Vizio 12563
Xbox 12083
Yamaha 12298


Produkt Specifikationer

Mærke: Sony
Kategori: Fjernbetjening
Model: RM-VZ220
Bredde: 53 mm
Dybde: 27 mm
Højde: 215 mm
Vægt: 135 g
Produktfarve: Sort
Batteritype: AA
Antal understøttede batterier: 2
Maks. rækkevidde: 10 m

Har du brug for hjælp?

Hvis du har brug for hjælp til Sony RM-VZ220 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Fjernbetjening Sony Manualer

Sony

Sony RM-V80T Manual

10 Marts 2024
Sony

Sony RMT-DSLR1 Manual

31 December 2023
Sony

Sony RM-X6S Manual

9 December 2023
Sony

Sony RM-V210T Manual

19 November 2023
Sony

Sony RM-MC60 Manual

3 November 2023
Sony

Sony RMT-DSLR2 Manual

27 September 2023
Sony

Sony RM-AV3100 Manual

4 September 2023
Sony

Sony RM-EZ2T Manual

25 August 2023
Sony

Sony RM-VL610 Manual

12 Juli 2023

Fjernbetjening Manualer

Nyeste Fjernbetjening Manualer