Soundskins Rings v3 SSK-RINGS Manual

Soundskins Ikke kategoriseret Rings v3 SSK-RINGS

Læs gratis den danske manual til Soundskins Rings v3 SSK-RINGS (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Soundskins Rings v3 SSK-RINGS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Recommended Installation Instructions

- Prepping the Surface

We need to start with getting all metal surfaces clean of dust, debris, oil, wax and moisture. For

this we recommend a microfiber clothe, a breathing mask, and a quick drying solvent like

Acetone. If you have some rust it is possible it requires a bit more attention and detail to ensure

good contact. Once all the surfaces have been prepped and properly air dried we can start

applying material. Our material is unique so a household pair of scissors, exact knife, or razor

blade can be used to cut out the patterns.

- Installation

Roll the material out on a flat surface and you can measure the size you will need, (paper or

cardboard can be used to cut templates) after you have made your cut, peel off the white paper

on the back covering the adhesive. When you’re to apply pick a place to start like the top down

so you can work the material all one direction and minimize any trapped air pockets. You can

push the material with your hand a medium pressure outwards till material has a complete

contact. If you see any possible trapped air you can use the point of a razor blade or a sewing

needle to poke a hole and push down material. The main purpose is to ensure the adhesive has

proper contact to the metal surface. Check that any holes that require fastening hardware are

not blocked. Repeat this step for the remainder of the installation and ensure lasting adhesion

with the maximum insulation. If you have questions we can be contacted with the info provided

Soundskins USA

13452 Alondra Blvd, Cerritos, Ca 90703

Phone: 562.689.5151

Email: info@soundskinsglobal.com

www.SoundSkinsGlobal.com

Produkt Specifikationer

Mærke:	Soundskins
Kategori:	Ikke kategoriseret
Model:	Rings v3 SSK-RINGS

Har du brug for hjælp?

Hvis du har brug for hjælp til Soundskins Rings v3 SSK-RINGS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Soundskins Manualer

Soundskins SSK-F1504DR Manual

22 September 2025

Soundskins SSK-STRIP Manual

12 Marts 2025

Soundskins SSK-WAVYPLUS Manual

12 Marts 2025

Soundskins SSK-GLDTR4DR Manual

1 September 2024

Soundskins SSK-RDGLD14 Manual

1 September 2024

Soundskins Rings v3 SSK-RINGS Manual

1 September 2024

Soundskins SSK-STGLD14 Manual

1 September 2024

Soundskins SSK-SEK Manual

1 September 2024

Soundskins SSK-F2504DR Manual

1 September 2024

Soundskins SSK-RAP4DR Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Siemens WQ32G28IL Manual

6 December 2025

MDT BE-TA550606.02 Manual

6 December 2025

Opticis USC-CC32 Manual

6 December 2025

Audio-Technica AT33xMONO Manual

6 December 2025

Bosch SPI4EMS24E Manual

6 December 2025

Fostex P1000K Manual

6 December 2025

Advantech UTC-124I1 Manual

6 December 2025

Anton/Bauer Titon Micro Kit Manual

6 December 2025

Philips Zoom! DayWhite DIS130 Manual

6 December 2025

Opticis USB-FC30AA Manual

6 December 2025