Soundskins SSK-GLDTR4DR Manual

Soundskins Ikke kategoriseret SSK-GLDTR4DR

Læs gratis den danske manual til Soundskins SSK-GLDTR4DR (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Soundskins SSK-GLDTR4DR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Jeep Door Kit Instructions

1. Start by locating the fastening hardware on the door

panel, take the appropriate screw driver and remove.

2. Once all the screws are removed you can take off the

door panel gently watching that you don’t break any of the

clips or mounting hardware. Pull the panel away slowly and

unplug any electrical connections.

3. You will find an insert that needs to be removed, with

mounting screws and cables that control door handle and

locking mechanism. Slowly pull the insert away and pull

through the cables to give yourself some slack.

• Panel/trim tool

• Roller

• Screw driver

• Rubber wedge

• Microber cloth

• Acetone or cleaning solution

• Razor blade

Tools needed for installation:

Soundskins USA

13452 Alondra Blvd, Cerritos, Ca 90703

Phone: 877.211.5597

Email: team@soundskinsglobal.com

www.SoundSkinsGlobal.com

4. Next you need to prop the window up by either a rubber

wedge or simply put a screw driver through the bottom hole

as illustrated.

6. When the surface is dry and clean, locate the piece of the

kit with the label on the back that coincides with the door you

are working on. Make sure it lines up correctly before pulling

the white cover paper off. After you confirm the right piece, pull

off the backing paper and start placing the material at the top,

working your way down with a roller. Make sure that the

material is rolled down completey and no air is trapped. Use a

razor blade point or household needle to release any air.

Repeat these steps for all door panels.

5. Now you are ready to prep the metal surface using a

microfiber cloth, Acetone (use a breathing mask), and wipe

away any moisture, oil, debris or etc. Then let air dry for an

appropriate time. The point is to get the surface clean to

ensure material glue contact.

YOU’RE NOW READY TO HIT THE ROAD!

Produkt Specifikationer

Mærke:	Soundskins
Kategori:	Ikke kategoriseret
Model:	SSK-GLDTR4DR

Har du brug for hjælp?

Hvis du har brug for hjælp til Soundskins SSK-GLDTR4DR stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Soundskins Manualer

Soundskins SSK-STRIP Manual

12 Marts 2025

Soundskins SSK-WAVYPLUS Manual

12 Marts 2025

Soundskins SSK-GLDTR4DR Manual

1 September 2024

Soundskins SSK-RDGLD14 Manual

1 September 2024

Soundskins Rings v3 SSK-RINGS Manual

1 September 2024

Soundskins SSK-STGLD14 Manual

1 September 2024

Soundskins SSK-SEK Manual

1 September 2024

Soundskins SSK-F2504DR Manual

1 September 2024

Soundskins SSK-RAP4DR Manual

1 September 2024

Soundskins SSK-BRONCO Manual

1 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Sony RM-V202T Manual

15 Juni 2025

Hughes & Kettner Attax Metroverb Manual

15 Juni 2025

Kohler K-10124 Manual

15 Juni 2025

Planet Audio P9900CPA Manual

15 Juni 2025

Levenhuk LabZZ SP20 Manual

15 Juni 2025

Planet Audio P62CP Manual

15 Juni 2025

Cranborne Audio Carnaby 500 Manual

15 Juni 2025

Audio-Technica AT-VM740xML/H Manual

15 Juni 2025

Stamos SWG-WC-3D Manual

15 Juni 2025

Planet Audio P350MB Manual

15 Juni 2025