SoundTube DS31-EZ Manual

SoundTube Højttaler DS31-EZ

Læs gratis den danske manual til SoundTube DS31-EZ (3 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om SoundTube DS31-EZ, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Install Instructions For:

DS31-EZ

Box contents

1.435.647.9555

800.647.TUBE

www.soundtube.com

Do not spec or install speaker near support beam, ventilation duct or

other structure that may interfere with speaker function or dispersion.

Warning Warning

SoundTube speakers must be installed by ofessional audio installer/contracto For safety and for a pr r.

optimum audio performance, installer must follow all di ections issued by Sound r Tube Entertainment .

DS31-EZ

(1) Speaker assembly

(1) Cylindrical or Tapered sleeve

(1) Magnetic grille

(1) Mounting Assembly

(2) Mounting screws

(2) 2.25” sleeve screws

(2) 0.50” screws

(2) Wire nuts

Cover plate

Tapered Sleeve

Mounting plate

Mounting screws (2)

Dual-Gang Junction Box (not included)

Speaker

Grille

Safety Clip

Safety leash

Adjustment loop

Tapered Sleeve

Tap Settings

Cylindrical Sleeve

(two pieces)

Install Instructions For:

DS31-EZ

1. Remove speaker body from

box and unravel signal wire.

2. 3. Unpack Designer Sleeve. Select tap setting on the

back face of the speaker body.

Each numeral setting

corresponds to a wattage

shown in tap setting table on

back of speaker (also shown

on Page 1). Use 8Ω for

transformer bypass.

4. If necessary, attach safety

cable by rst inserting into side

of mounting bracket.

8. Thread signal wire through

Designer Sleeve central hole,

then gently slide sleeve down

OVER safety clip wire and

speaker body. Then use two

included 2.25” Phillips-head

screws to secure sleeve to

speaker body (Tapered Sleeve

shown).

9. If using both Cylindrical

Sleeve pieces, use two

included 0.50” Phillips-head

screws to secure the two

sleeve pieces to one another.

10. Thread signal wire through

included Strain Relief Bushing.

11. Screw bushing into

Designer Sleeve, pulling excess

wire through until snug.

12. Tighten down top gland to

secure the signal wire. Gland

must be tightened around

signal cable to prevent water

ingress and maintain IP rating.

1.855.663.5600

www.soundtube.com

5. Align safety cable with

bracket slot and pull up to

secure.

6. Unpack grille and attach

grille safety restraint by placing

the large end of the clip over

the mounting bracket screw on

the top face of the speaker

body (the face opposite the

front of the speaker).

7. You will need to slightly

loosen/unscrew one of the

hanging bracket screws in

order to t the safety clip

underneath. Slide the safety

clip until the small end snaps

into place around the screw.

Produkt Specifikationer

Mærke:	SoundTube
Kategori:	Højttaler
Model:	DS31-EZ
Kode for international beskyttelse (IP):	IPX6
Højde:	215.9 mm
Vægt:	2720 g
Antal pr. pakke:	1 stk
Produktfarve:	Sølv
Udgangseffekt (RMS):	30 W
Husmateriale:	Acrylonitrilbutadienstyren
Pakketype:	Kasse
Anbefalet brug:	Hjem
Frekvensområde:	80 - 20000 Hz
Impedens:	8 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	- kanaler
Højttaler, placering:	Kan monteres i loftet
Certificering:	CE, RoHS
Diameter:	139.7 mm
Antal drivere:	1
Driver diameter:	76.2 mm
Sensitivitet:	87 dB
Drivercylinder, materiale:	Polypropylen
Højttalergrill materiale:	Stål