StarTech.com 6SD4FCRTB3C Manual

StarTech.com Hukommelseskortlæser 6SD4FCRTB3C

Læs gratis den danske manual til StarTech.com 6SD4FCRTB3C (2 sider) i kategorien Hukommelseskortlæser. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om StarTech.com 6SD4FCRTB3C, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

FR: Guide de l’utilisateur - fr.startech.com

DE: Bedienungsanleitung - de.startech.com

ES: Guía del usuario - es.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IT: Guida per l’uso - it.startech.com

JP: - jp.startech.com取扱説明書

Manual Revision: 09/13/2018

For the latest information, technical specications, and support for

this product, please visit www.startech.com/6SD4FCRTB3C.

Package Contents

• SD Card Reader/Writer x 1

• Quick-Start Guide x 1

Requirements

Host Computer

• Thunderbolt 3 Port x 1

SD Card

• (Optional) SD Card x 6

Product Diagram

Actual product may vary from photos.

Connecting the SD Card Reader/Writer

1. Connect the Thunderbolt 3 Connector to a Thunderbolt 3 Port on

the Host Computer.

Note: Driver installation is not required.

Note: Use the Thunderbolt 3 Port on your Host Computer with

the highest power output for the best performance. Consult the

manufacturer of your Host Computer for details regarding the

power specications of your Thunderbolt 3 Ports.

6SD4FCRTB3C

6-Slot SD™ Card Reader/Writer - Thunderbolt™ 3 - SD 4.0, UHS-II

Inserting an SD Card

1. Insert an SD Card, label side up, into one of the SD Card Slots on

the front of the SD Card Reader/Writer.

2. Once inserted, push the SD Card into the SD Card Slot until it

clicks into place.

Note: The Host Computer’s Operating System (OS) will

automatically detect the SD Card and install the required driver

software.

3. Repeat Steps 1 and 2 for the installation of up to ve additional

SD Cards.

4. Access the data stored on the SD Card inserted in step 1.

Note: The SD Cards may require formatting before they appear up

on your Host Computer.

Removing an SD Card

Warning: Removal of an SD Card before it is safe could result in the

loss or corruption of data on the SD Card.

Windows

1. Click on the Up arrow Taskbar on the right side of the .

2. The System Tray will pop up, revealing a set of icons.

3. Click on the Safely Remove Hardware icon.

4. The Safely Remove Hardware screen will appear.

5. Select the SD Card you wish to remove.

6. A message will appear telling you when it is safe to remove the

Card from the SD Card Reader/Writer.

macOS

1. Close any open screens associated with the SD Card Reader/

Writer.

2. On the , click and drag the Desktop USB storage icon to the

Trash Can icon. The Trash Can Eject icon will turn into an icon

indicating that it is safe to remove the SD Card from the SD Card

Reader/Writer.

Keyboard Shortcut (Optional)

1. Select the icon.USB Storage

2. Press Command E + to safely eject the SD Card. The SD Card can

now be safely removed from the SD Card Reader/Writer.

Physically Removing the SD Card

1. Push the SD Card into the SD Card Reader/Writer until the SD

Card clicks. The SD Card will be ejected from the SD Card Slot.

2. Pull the SD Card out of the SD Card Slot.

SD Card Slot

Thunderbolt 3

Connector LED Indicators

Safety Measures

• If product has an exposed circuit board, do not touch the product under power.

• If Class 1 Laser Product. Laser radiation is present when the system is open.

• Wiring terminations should not be made with the product and/or electric lines under power.

• Product installation and/or mounting should be completed by a certied professional as per

the local safety and building code guidelines.

• Cables (including power and charging cables) should be placed and routed to avoid creating

electric, tripping or safety hazards.

Mesures de sécurité

• Si l’un des circuits imprimés du produit est visible, ne pas touchez le produit lorsqu’il est sous

tension.

• Si le produit est Laser de Classe 1, le rayonnement laser est présent lorsque le système est

ouvert.

• Les terminaisons de câblâge ne doivent pas être eectuées lorsque le produit et/ou les câbles

électriques sont sous tension.

• L’installation et/ou le montage du produit doit être réalisé par un professionnel certié et

dans le respect des normes locales et du code de construction local.

• Les câbles (y compris les câbles d’alimentation et de chargement) doivent être placés et

acheminés de façon à éviter tout risque électrique, de chute ou de sécurité

安全対策

• 製品に露出した状態の回路基盤が含まれる場合、電源が入っている状態で製品に触らないでください。

• クラス1レーザー製品では、システムが開放状態の場合、レーザー光が照射されています。

• 電源が入っている状態の製品または電線の終端処理を行わないでください。

• 製品の設置やマウントは、使用地域の安全ガイドラインおよび建築基準に従い、有資格の専門業者が行うようにしてください。

• ケーブル（電源ケーブルと充電ケーブルを含む）は、適切な配置と引き回しを行い、電気障害やつまづきの危険性など、安全上のリスクを回避するようにしてくだ

さい。

Misure di sicurezza

• Se il prodotto ha un circuito stampato visibile, non toccare il prodotto quando è acceso.

• Prodotto laser di Classe 1. Quando il sistema è aperto sono presenti radiazioni laser.

• I terminiali dei li elettrici non devono essere realizzate con il prodotto e/o le linee elettriche

sotto tensione.

• L’installazione e/o il montaggio dei prodotti devono essere eseguiti da un tecnico

professionale certicato che conosca le linee guida locali sulle norme edilizie e sulla sicurezza.

• I cavi (inclusi i cavi di alimentazione e di ricarica) devono essere posizionati e stesi in modo da

evitare pericoli di inciampo, rischi di scosse elettriche o pericoli per la sicurezza.

Säkerhetsåtgärder

• Rör aldrig vid enheter med oskyddade kretskort när strömmen är påslagen.

• Om laserproduktet är Klasse 1, laserstrålning avges när systemet är öppet.

• Montering av kabelavslutningar får inte göras när produkten och/eller elledningarna är

strömförda.

• Installation och/eller montering får endast göras av behöriga yrkespersoner och enligt

gällande lokala förordningar för säkerhet och byggnormer.

• Kablar (inklusive elkablar och laddningskablar) ska dras och placeras på så sätt att risk för

snubblingsolyckor och andra olyckor kan undvikas.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or

modications not expressly approved by StarTech.com could void the user’s authority to operate

the equipment.

For the State of California

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to

the following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference,

including interference that may cause undesired operation of the device.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected

names and/or symbols of third-party companies not related in any way to StarTech.com.

Where they occur these references are for illustrative purposes only and do not represent an

endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. StarTech.com hereby

acknowledges that all trademarks, registered trademarks, service marks, and other protected

names and/or symbols contained in this manual and related documents are the property of their

respective holders.

Warranty Information

This product is backed by a two-year warranty. StarTech.com warrants its products against defects

in materials and workmanship for the periods noted, following the initial date of purchase. During

this period, the products may be returned for repair, or replacement with equivalent products at

our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its

products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers,

directors, employees or agents) for any damages (whether direct or indirect, special, punitive,

incidental, consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss,

arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If

such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.

45 Artisans Cres.

London, Ontario

N5V 5E9

Canada

StarTech.com LLP

2500 Creekside Pkwy.

Lockbourne, Ohio

43137

U.S.A.

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd.,

Brackmills

Northampton

NN4 7BW

United Kingdom

FR: fr.startech.com

DE: de.startech.com

ES: es.startech.com

IT: it.startech.com

JP: jp.startech.com

NL: nl.startech.com

LED Indicators

There are six LED lights on the SD Card Reader/Writer (one next

to each SD Card Slot). These LED lights indicate dierent SD Card

Reader/Writer functionality:

Solid LED

• Indicates that the SD Card Reader/Writer is active (SD Card

inserted correctly and the SD Card Reader/Writer is connected to

the Host Computer).

LED O

• Indicates that either the SD Card is not correctly inserted in the SD

Card Reader/Writer, the SD Card is not functional, or the SD Card

Reader/Writer is not connected to the Host Computer.

Flashing LED

• Indicates activity (the SD Card is being accessed by the SD Card

Reader/Writer).

Troubleshooting

Reactivating an SD Card Autoplay/Autorun Function

Depending on the Host Computer’s OS, the SD Card Conguration

screen may appear, giving you several conguration options. If you

select the Take No Action Autoplay/ option, you will deactivate the

Autorun function. To revert back to the original settings:

Windows 10

1. Click the Windows icon or press the Windows key on your

keyboard.

2. Type and click on . Autoplay AutoPlay Settings

3. Find the device you want to update from the list and use the

dropdown menu to select the action you wish the system to

perform upon drive insertion.

Note: These steps may be dierent depending upon your

Operating System.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	Hukommelseskortlæser
Model:	6SD4FCRTB3C

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com 6SD4FCRTB3C stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hukommelseskortlæser StarTech.com Manualer

StarTech.com 1B-USB-C-CFE-ADAPTER Manual

5 September 2024

StarTech.com FCREADU2OTGB Manual

21 August 2024

StarTech.com FCREADMICRO3 Manual

20 August 2024

StarTech.com SDMSDRWU3AC Manual

20 August 2024

StarTech.com 35FCREADBK3 Manual

20 August 2024

StarTech.com CFAST2SAT25 Manual

20 August 2024

StarTech.com FCREADMICRO Manual

19 August 2024

StarTech.com ECREAD Manual

18 August 2024

StarTech.com FCREADU3C Manual

18 August 2024

StarTech.com 4SD4FCRU31C Manual

18 August 2024

Hukommelseskortlæser Manualer

Nyeste Hukommelseskortlæser Manualer

Vantec UGT-CR940 Manual

27 Februar 2025

OneSpan Digipass 882 Sm@rt Tan Photo Manual

26 December 2024

Vimar 19457.TR.M Manual

15 December 2024

D-Link DUB-2325 Manual

13 December 2024

König CSU3H4P200BL Manual

8 Oktober 2024

König CSU3ACR100BL Manual

4 Oktober 2024

Hama 123948 Manual

18 September 2024

Icy Dock MB123SRCK-1B Manual

6 September 2024

Vantec UGT-CR615 Manual

5 September 2024

CSL 300921 Manual

3 September 2024