StarTech.com ST7200USBM Manual


Læs gratis den danske manual til StarTech.com ST7200USBM (1 sider) i kategorien Interface hub. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 18 anmeldelser. Har du et spørgsmål om StarTech.com ST7200USBM, eller vil du spørge andre brugere om produktet?

Side 1/1
Warranty Information
This product is backed by a one year warranty.
In addition, StarTech.com warrants its products against defects in materials
and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with
equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising
from misuse, abuse, alteration, or normal wear and tear.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct
or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of
apply, the limitations or exclusions contained in this statement may not apply to you.
ST7200USBM
Mountable Rugged Industrial 7-Port USB2.0 Hub
Installation Guide
Packaging Contents
1 x ST7200USBM USB hub•
1 x USB cable•
1 x Installation Guide•
System Requirements
USB enabled computer system with available port•
USB compliant operating system•
Specications
Bus Interface
USB 2.0
Connectors
7 x USB type A female
1 x USB type B female
1 x 2-wire power terminal block
LEDs
1 x Power
Maximum Data Transfer
Rate
USB 2.0: 480Mbps
Operating Temperature
0°C to 55°C (32°F to 131°F)
Storage Temperature
-20°C to 85°C (-4°F to 185°F)
Humidity
5~95% RH
Dimensions
133.0mm x 61.5mm x 36.3mm
Weight
500g
Installation
Connect the USB type B cable from the USB hub, to an available USB port on the host computer system. No driver
installation is required, as a USB compliant operating system will automatically install it.
OPTIONAL: Power will be provided by the USB port on the host computer system, if additional power is required, an
external power source can be connected to the USB hub via the 2-wire terminal block.
2-Wire Power
Terminal Block
USB type B connector
(Host)
Power LED
USB hub
connectors


Produkt Specifikationer

Mærke: StarTech.com
Kategori: Interface hub
Model: ST7200USBM
Bredde: 61.5 mm
Dybde: 133 mm
Højde: 36.3 mm
Vægt: 283 g
Brugervejledning: Ja
Produktfarve: Sort
Pakkevægt: 500 g
Pakkedybde: 151 mm
Pakkebredde: 216 mm
Pakkehøjde: 51 mm
Opbevaringstemperatur (T-T): -20 - 85 °C
Relativ luftfugtighed ved drift (H-H): 5 - 95 %
Antal USB 2.0-porte: 7
Driftstemperatur (T-T): 0 - 55 °C
Husmateriale: Stål
Kabler inkluderet: USB
Certificering: CE, FCC, RoHS, REACH, TAA
LED-indikatorer: Ja
Harmoniseret systemkode (HS): 84719000
Indgangsspænding: 7 - 24 V
Hovedkassen højde (udvendigt): 264 mm
Hovedkassens længde (udvendigt): 514 mm
Hovedkassens bredde (udvendigt): 436 mm
Værtsgrænseflade: USB 2.0 Type-B
Plug and play: Ja
Produkter pr. hovedkasse (udvendigt): 25 stk
Gennemsnitstid mellem fejl (MTBF): 170227 t
Dataoverførselshastighed: 480 Mbit/s
Klemrække port: Ja
Porte, antal: 7
Beskyttelse ved overspænding: Ja
Hot-swap: Ja
Hub-grænseflader: USB 2.0
Chipsæt: Terminus - FE2.1
DIN skinnesæt inkluderet: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST7200USBM stil et spørgsmål nedenfor, og andre brugere vil svare dig