StarTech.com USB56KEMH Manual

StarTech.com Router USB56KEMH

Læs gratis den danske manual til StarTech.com USB56KEMH (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om StarTech.com USB56KEMH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

I T: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

P T: Guia do usuário - pt.startech.com

Manual Revision: 10/29/2013

For the most up-to-date information, please visit: www.startech.com

Packaging Contents

• 1 x USB Modem

• 1 x RJ11 Cable

• 1 x Driver CD

• 1 x Instruction Manual

System Requirements

• USB enabled computer system with available USB port

• Windows® 8 (32/64-bit), 7 (32/64), Vista (32/64), XP SP3 (32/64)

Windows® Server 2012, 2008 R2, 2003 (32/64)

Mac OS 10.7 and up (Tested up to 10.9)

USB56KEMH

External V.92 56K USB Data/Fax Modem - Hardware Based

Installation

Windows 2000/XP/Server 2003

1. Upon starting Windows, if

the “Found New Hardware”

wizard appears on the screen,

cancel/close the window and

insert the included Driver CD

into the computer’s

CD/DVD drive.

2. AutoRun will automatically

launch the Driver/Software

installation splash screen. If

not, open “My Computer” and

right-click on the CD/DVD

drive the disk is inserted into

and select “AutoRun”.

3. Select the option to install the Drivers, then select your operating

system version. This should then launch the Driver

Installation wizard.

4. Complete the wizard and this should automatically install all

necessary drivers/software.

Windows Vista/7/Server 2008 R2

1. Upon starting Windows, if the

“Found New Hardware” wizard

appears on the screen, cancel/

close the window or choose

not to install the drivers and

insert the included Driver CD

into the computer’s

CD/DVD drive.

2. AutoRun should automatically

launch the Driver/Software

installation splash screen or

prompt you to run AutoRun.

exe. If not, open “Computer”

and right-click on the CD/DVD

drive the disk is inserted into

and select “AutoRun”.

3. Select the option to install the Drivers, then select your operating

system version. This should then launch the Driver

Installation wizard.

4. Complete the wizard and this should automatically install all

necessary drivers/software.

*actual product may vary from photos

USB type A connector

RJ11

connector

LED indicators

*screenshots for reference only

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Part 68 Statement

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identier in the format

US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.

This equipment uses the following Universal Service Order Code (USOC) jacks: RJ11C.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord

and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but

not all areas, the sum of RENs should not exceed ve (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for

this product is part of the product identier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). If this equipment causes harm to the

telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isn’t practical, the telephone company will notify the customer

as soon as possible. Also, you will be advised of your right to le a complaint with the FCC if you believe it is necessary.

The telephone company may make changes in its facilities, equipment, operations or procedures that could aect the operation of the equipment. If this happens the telephone company will provide advance notice

in order for you to make necessary modications to maintain uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty information, please contact StarTech.com at 1-800-265-1844. If the equipment is causing harm to the telephone network, the telephone company

may request that you disconnect the equipment until the problem is resolved.

There are no serviceable parts in this equipment.

Connection to party line service is subject to state taris. Contact the state public utility commission, public service commission or corporation commission for information.

If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does not disable your alarm equipment.

If you have questions about what will disable alarm equipment, consult your telephone company or a qualied installer.

Industry Canada CS03 Statement

This product meets the applicable Industry Canada technical specications. / Le présent matériel est conforme aux specications techniques applicables d’Industrie Canada.

The Ringer Equivalence Number (REN) is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination of an interface may consist of any combination of devices

subject only to the requirement that the sum of the RENs of all the devices not exceed ve. / L’indice d’équivalence de la sonnerie (IES) sert à indiquer le nombre maximal de terminaux qui peuvent être raccordés à une

interface téléphonique. La terminaison d’une interface peut consister en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices d’équivalence de la sonnerie de tous les dispositifs

n’excède pas cinq.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to StarTech.com. Where they occur these references

are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in

question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names

and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads. For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty. In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase.

During this period, the products may be returned for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its

products from defects or damages arising from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

Specications

Host Interface USB 1.1

Chipset Conexant - CX93010

LEDs 1 x Data

1 x On Hold

Connectors 1 x RJ11 Female

1 x USB A Male

Supported Modulations

(Modem)

ITU-T V.92/V.90, V.34, V.32bis, V.32,

V.22bis, V.22, V.23, V.21 Bell 212A and

Bell 103