OPERATING INSTRUCTIONS FOR STREAMLIGHT WAYPOINT® LITHIUM ION
Thank you for selecting the Waypoint® Lithium Ion Rechargeable, a truly remarkable portable
light. As with any professional tool, reasonable care and maintenance of this product will provide
years of dependable service. Please read this manual before using your Waypoint® Lithium Ion
Rechargeable. It includes important safety and operating instructions and should be saved.
WARNING: Use of light in “strobe” mode may cause seizure in persons with photosensitive
A. While Eye Damage from the Waypoint® Lithium Ion Rechargeable is unlikely, YOU SHOULD
(RG-2): Do not stare into beam. May be harmful to eyes.
B. SAVE THESE INSTRUCTIONS. This manual contains important safety and operating
instructions for your Waypoint® Lithium Ion Rechargeable light and charger.
C. Before using the light, read all instructions.
D. CAUTION: To reduce the risk of fire, electrical shock, or personal injury, do not attempt to use
the charger to recharge any other product. Likewise, do not attempt to charge the Waypoint®
Lithium Ion rechargeable with any other charger.
E. Do not abuse the cord. Never carry the charger by the cord or yank the cord to disconnect it
from a receptacle. Do not use a damaged charger. Have damaged cords or plugs replaced
F. Plug AC charger directly into an electrical outlet. Do not use an extension cord.
G. Do not try to repair the light or charger yourself. Take it to a qualified service facility or return it
Before using the light for the first time, you must fully charge the battery.
Charging temperature is between 20ºF and 115ºF. A safety circuit prevents charge
There is no danger of overcharge. A safety circuit is employed to prevent over charging
Typical charge time is (4) four hours.
Battery charging instructions:
Rotate the charge port cover on the back of the light approximately 90º, or until the cover
tether is in a vertical position. Pull the cover out of the slot.
Plug the AC charger into a wall receptacle.
Plug the barrel connector of the charge cord into the female charge port on the light.
The battery charge indicator LED will light up in the window next to the charge port.
Red = Charging; Green = Battery is fully charged.
When the battery is charged, remove the charge cord, and replace the charge port cover.
Align the straight sides of the cover with the slot, push the cover into the hole, press
down and rotate the cover 90º to maintain a water tight seal.
