1
FOR USE WITH
SPX3000/SPX4000/SPX9000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Attach the transfer adapter to your trigger gun.
3. Take the rotary wash brush and align the two tabs with your trigger gun.
4. Once aligned, push the rotary brush into the transfer adapter, twist counter
clockwise to lock into place.
FOR USE WITH
SPX2000/SPX6000/SPX7000 SERIES:
1. If not already done, detach your spray wand from your trigger gun.
2. Take the rotary brush and align the two tabs with the inside of the trigger gun.
3. Once aligned, push the rotary wash brush into the trigger gun, twist counter
clockwise to lock into place.
SPX3000/SPX4000/SPX9000 Series
Trigger gun Transfer adapter Rotary brush
SPX2000/SPX6000/SPX7000 Series
Trigger gun Rotary brush
SPX200/SPX1000 Series
Rotary brush
gun Middle wand
FOR USE WITH SPX200/SPX1000 SERIES:
1. Disconnect your spray wand assembly so that only the middle wand remains
attached to your trigger gun.
2. Take the rotary brush and align the two tabs with the middle wand.
3. Once aligned, push the rotary wash brush into the middle wand and twist
counter clockwise to lock into place.
© 2021 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
R
SPX-RB1-RM ASSEMBLY QUICK GUIDE
If you have any questions or comments,
please call the Snow Joe® + Sun Joe® customer service department at:
1-866-SNOWJOE (1-866-766-9563)
Service + Support
If your Sun Joe® SPX-RB1-RM requires service or maintenance, please call
Snow Joe® + Sun Joe® customer service at 1-866-SNOWJOE (1-866-766-
9563) for assistance.
Model + Serial Numbers
When contacting the company or arranging service from an authorized
dealer, you will need to provide the model and serial numbers, which can
be found on the decal located on the sprinkler. Copy these numbers into
the space provided below.
Record the following numbers from the housing or handle
of your new product:
Model #:
Serial #:
S P X - R B 1 - R M