Sun Joe SWJ701E Manual

Sun Joe Sav SWJ701E

Læs gratis den danske manual til Sun Joe SWJ701E (72 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Sun Joe SWJ701E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/72

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

®, LLC Model SWJ701E Form No. SJ-SWJ701E-MR6

OPERATOR’S MANUAL

ELECTRIC CHAIN SAW

18-INCH | 14-AMP

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Read all the instructions contained in this manual. Keep this

manual in a safe place, so that the information is available at

all times. If you give the equipment to another person, make

sure to provide these operating instructions. Basic safety

precautions should always be followed to reduce the risk of

re, electric shock and personal injury.

Notice the personal safety alert symbol m used in this

manual to draw your attention to a given along WARNING

with the particular operating instruction. This means that

the operation requires special ATTENTION, CAUTION and

AWARENESS.

Intended use

This machine was designed and manufactured for

felling, bucking, and delimbing trees or cutting wooden

objects with dimensions suitable for the cutting bar's

capabilities.

Improper use

Any other use diering from the above mentioned applications

poses a serious hazard to the user and may damage both the

tool and your personal property. Examples of improper use

include, but are not limited to:

• Trimming hedges;

• Carving;

• Sectioning pallets, crates and various packing materials;

• Sectioning furniture or other materials with nails, screws or

other metal components;

• Butchering meat;

• Using the machine to lift, move or split objects;

• Using the machine while fastened to xed supports.

Improper use of the machine will invalidate the warranty,

relieve the manufacturer from all liabilities, and the user will

consequently be liable for any and all damage or injury to

himself/herself or others.

General Safety

mWARNING! When using electric yard tools, basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury, including the following:

1. Keep guards in place – Protective guards should be

checked periodically to ensure they are properly tted and

in correct working order.

2. Remove adjusting keys and wrenches – Check that

adjusting wrenches are removed from the saw before

turning it on.

3. Keep work area clean and well-lit – Clear work area of

branches and limbs after each cutting session. Cluttered

areas invite accidents.

4. Avoid dangerous conditions – Do not use this machine

in rainy, stormy, damp or wet locations. Do not operate the

unit in gaseous or explosive atmospheres. Motors in these

units normally spark, and the sparks may ignite fumes.

5. Do not use the chain saw in the rain.

6. Keep bystanders and children away – All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

7. Do not force the tool – It will do the job eectively and

safely if it is used at the rate for which it was designed.

8. Use the right tool – Do not force the tool or any

attachment on the tool to do a job for which they were

not designed.

9. Wear proper apparel – Do not wear loose articles of

clothing or jewelry since such items may get caught

in moving parts. Use of heavy-duty rubber gloves,

substantial non-skid footwear, and close-tting clothing is

recommended when working outdoors with power tools.

10. Wear protective hair coverings to contain long hair.

11. Always wear safety glasses and ear defenders to

provide eye and ear protection – Everyday eyeglasses

only have impact resistant lenses and do not provide the

same protection as safety glasses.

12. Wear face or dust masks – If the cutting operation is

dusty, the use of a face or dust mask specially designed

to lter out microscopic particles is recommended.

13. Do not overreach – Keep proper footing and balance

at all times.

14. Maintain tools with care – Keep tools sharp and clean

for the best and safest performance. Follow instructions

for lubricating and changing accessories.

15. Disconnect the chain saw from the Disconnect tool –

power supply when not in use, before servicing, when

transporting, or when changing the chain or other

accessories.

16. Reduce the risk of unintentional starting – Make sure

the switch is in the OFF position before plugging the tool

into a power source.

17. Use recommended accessories – Consult the owner’s

manual for recommended accessories. The use of

improper accessories may cause risk of injury.

18. Check for damaged parts – Before each use, repair or

replace any guard or part that is damaged. In addition,

check for alignment of moving parts, binding of moving

parts, breakage of parts, and any other conditions that

may aect the tool's operation.

19. Never leave tool unattended while it is running – Turn

the power OFF by removing the power cord directly from

its socket. Do not leave the saw until the cutting bar

comes to a complete stop.

20. Avoid unintentional starting – Do not carry the chain saw

with your nger on the switch.

21. Do not grasp the exposed cutting blade or cutting

edges when picking up or holding the saw – Be sure to

encase the cutting bar in its protective sheath when not

in use.

22. Stay alert – Watch what you are doing. Use common

sense. Do not operate the chain saw when you are tired.

23. Store idle tool indoors – When not in use, appliances

should be stored indoors in a dry and high or locked-up

place out of the reach of children.

mWARNING! Some dust and debris created by the

use of the tool could contain chemicals known to the State

of California to cause cancer and birth defects or other

reproductive harm. Some examples of these chemicals are:

• Chemicals in fertilizers

• Compounds in insecticides, herbicides, and pesticides

• Arsenic and chromium from chemically treated lumber

Your risk from exposure to these chemicals varies, and

depends on how often you do this type of work. To reduce

your exposure, work in a well-ventilated area and with

approved safety equipment, such as dust masks that are

specially designed to lter out microscopic particles.

Chain Saw Use And Care

Save all warnings and instructions for future reference. The

term “power tool” in the warnings refers to your electric chain

saw.

mWARNING! Turn o the power switch and disconnect

the power source before adjusting, inspecting, servicing

or cleaning the power tool, when changing accessories or

when any other dangerous conditions present themselves.

All maintenance tasks should be performed after the power

tool's rotating parts have stopped completely. Such preventive

safety measures reduce the risk of starting the power tool

accidentally.

1. Do not force the power tool. Use the correct power tool

for your application. The correct power tool will perform

better with less likelihood of personal or mechanical

damage if it is used at the rate for which it was designed.

2. Do not use the power tool if the switch does not turn it on

and o. Any power tool that cannot be controlled with the

switch is dangerous and must be repaired.

3. Disconnect the unit from the power source before making

any adjustments, changing accessories, or storing the

power tool. Such preventive safety measures reduce the

risk of starting the power tool accidentally.

4. Store idle power tools indoors in a dry, locked place

out of the reach of children. Do not allow anyone who is

unfamiliar with the power tool or these instructions access

to the machine. Power tools are dangerous in the hands of

untrained users.

5. Maintain power tools with care to ensure safe operation

and optimal performance. Keep handles dry, clean and

free from oil and grease. Check for misalignment or

obstruction of moving parts, breakage of parts and any

other condition that may aect the power tool’s operation.

If damage is found, have the power tool repaired before

use. Many accidents are caused by poorly maintained

power tools.

6. Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to

become jammed and are easier to control.

7. Use the power tool and accessories in accordance with

these instructions, and be sure to take into account the

working conditions and the work to be performed. Using

the power tool for operations other than those intended

could result in a hazardous situation.

8. Moving parts present risks. Keep your face, hair, clothing,

hands and feet away from all moving parts. All guards

and safety attachments must be installed properly before

using the power tool. Shut o and disconnect the battery

before touching any parts other than the handles and the

switch.

Produkt Specifikationer

Mærke:	Sun Joe
Kategori:	Sav
Model:	SWJ701E

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe SWJ701E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Sav Sun Joe Manualer

Sun Joe SWJ802E-PRP Manual

14 November 2024

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024

Sun Joe SWJ599E-RM Manual

24 December 2023

Sun Joe 24V-PS10-CT Manual

24 December 2023

Sun Joe SWJ800E-RM Manual

16 December 2023

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023

Sun Joe ION16CS-RM Manual

26 August 2023

Sun Joe 20VION-CS10-RM Manual

22 August 2023

Sun Joe 24V-PS10-LTE-RM Manual

5 August 2023

Sun Joe ION8PS2-CT-RM Manual

1 August 2023

Sav Manualer

Nyeste Sav Manualer

Dremel CS12V Manual

13 Juni 2025

Metabo BAS 505 Precision WNB Manual

9 Juni 2025

Mega 64000 Manual

9 Juni 2025

Metabo ST 18 LT 130 Manual

8 Juni 2025

Metabo STB 18 LT 130 Manual

8 Juni 2025

Metabo BAS 505 Precision DNB Manual

7 Juni 2025

Draper 70833 Manual

7 Juni 2025

Draper 83677 Manual

6 Juni 2025

Draper Storm Force 98445 Manual

6 Juni 2025

Draper Expert 57489 Manual

6 Juni 2025