Synco G2 Max Manual

Synco Mikrofon G2 Max

Læs gratis den danske manual til Synco G2 Max (2 sider) i kategorien Mikrofon. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Synco G2 Max, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
1. TX Transmitter
2. RX Receiver
① External Mic Input
② Type-C Charging Port
③ On/ O󽗈 Button
④ Built-in Mic
⑤ Display Screen
① Type-C Charging Port / Digital Output
③ 3.5mm TRS Output
④ 3.5mm Monitoring Port
⑤ Display Screen
⑥ Gain Adjustment of TX A
⑦ Gain Adjustment of TX B
⑧ Magnet Pocket Clip
Caring For Your SYNCO Product Product Instruction
Packing List
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids warranty.
· Please have the product checked or repaired by authorized technicians
if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics damage.
· Warranty does not apply to human errors.
Microphone G2A2 MAX
User Manual
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
⑥ Noise Reduction Button
⑦ Gain Adjustment of TX/ Internal Storage
Recording Button
⑧ Magnet Pocket Clip
3. Display Screen
Recording
TX A
Gain of A TX
Audio Dynamic
Display of A TX
Noise Reduction on
TX Transmitter
RX Receiver
Muting
Recording Mode:
Mono/ Stereo/ Safety
Disconnected
Connecting
Connected
Audio Dynamic
Display
Power Indicator
TX B
Gain of B TX
Audio Dynamic
Display of TX B
Power Indicator
Operations
RX Receiver x1 TX Transmitter
x2
3-in-1 Charging Cable x1 External Lav Mic (With Wind Mu󽗈) x2
3.5mm TRRS Phone Cable x1 3.5mm TRS Camera Cable x1
2. Pairing
Automatic Pairing
Automatically pairing after the TX/RX turns on.
Manual Pairing
① Long press the transmitter and receiver at the same time for 3 seconds
to power o󽗈 .
② After shutdown, long press the power button of the transmitter and
receiver for 8 seconds at the same time to enter the [connecting ] state.
Disconnected Connecting
Connected
③ Successfully Connected show as the picture
*Note: Before the successful connection, the transmitter channel displays
A by default. The 󽗉rst transmitter connected to the receiver is transmitter A,
and the second one is transmitter B.
1. Power On/ O󽗈
Power On
Long press the power button for 3 seconds to turn on, and the display
screen will light up.
Power O󽗈
Long press the power button for 3 seconds to turn it o󽗈, and the display
screen will light o󽗈.
Mic Windshield x2 Magnet x2 User Manual X1
Carrying Bag x1
3. Internal Storage Recording Function
On/O󽗈:
Long press the internal storage recording button on TX for 3 seconds to
turn on or o󽗈 the internal storage recording function. Once the function
is on, a red point will be displayed on the screen and will disappear once
the function is o󽗈.
Red point on the RX's screen:
Internal storage recording on
Red point on RX is 󽗊ashing:
Storage is full
"!" on TX: Storage is full
Red point on the TX's screen:
Internal storage recording on
*Note: When using an external microphone, please insert it correctly
into the microphone input jack. Only TRS interface microphones are
supported.
4. Channel output connection
① 3.5mm OUT output
The receiver outputs the audio signal to the recording device via either a
3.5mm TRRS phone cable or a 3.5mm TRS camera cable. Please use the
appropriate cable according to your device.
Apple Adapter (With MFI Certi󽗉cation)
3.5mm TRRS Phone Cable
3.5mm TRS Camera Cable
② Type-C port digital output
The receiver Type-C port has a digital output function, which can directly
use the Type-C to Type-C cable to output mobile phones or computers
and other devices.
*Note: When connecting the computer, enter the sound Settings and set
the input microphone to SYNCO G2 MAX to use G2 MAX recording; Set
the output speaker to SYNCO G2 MAX to use real-time ear return in the
receiver listening interface.
Wireless Transmission
RF Frequency Band
Working Distance
Mounting
Audio Input
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Built-In Memory
Recording Hour
Display Screen
Dimensions
Material
Weight
Wireless Transmission
RF Frequency Band
Working Distance
Latency
Mounting
Number of Audio Channels
Audio Output
Volume Adjustment
Power Requirements
Battery Type
Battery Charging Time
Battery Life
Display Screen
Dimensions
Material
Weight
Form Factor
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area), 164ft/50m (NLOS area)
Pocket Clip + Magnet
3.5 mm TRS Mic Input
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
8GB
Approx. 24H (About 5H For Each Recording File)
TFT Screen
52X42X17mm
ABS
39g
Digital 2.4GHz
2400-2483.5MHz
656ft/200m (LOS area)
164ft/50m (NLOS area)
20ms
Pocket Clip
2
3.5 mm TRS Mic Output
3.5 mm TRS Headphone Output
Type-C Output
6 levels (0-3-6-9-12-15)/(0~30dB)
5V 1A
Built-in Lithium Battery, 400mAh
2H
8H
TFT Screen
52X42X17mm
ABS
39g
Built-in/External Mic
50Hz-20KHz
-35dB（±3dB，re 1V/Pa at 1 KHz）
120dB SPL（at 1KHz）
TX Transmitter
RX Receiver
Microphone
11.Setting The Recording Level Correctly
Camera devices generally have poor-quality, noisy preamps. In order to
get the cleanest signals possible, it is highly recommended that you set
the recording level on your camera quite low, 1/2 or 1/3 of it.
G2 provides variable gain control, allowing you to tailor your levels to just
about environment and recording device.
Adjust the recording level of inbuilt mics for SONY Camera
(Take A7S Ⅱ for example)
Adjust the recording level of inbuilt mics for Canon Camera
(Take EOS 5D Mark Ⅳ for example)
Adjust the recording level of inbuilt mics for Panasonic Camera
(Take LUMIX GH5 for example)
Speci󽗉cations
*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：
support@syncoaudio.com
Guangzhou Zhiying Technology Co., Ltd
Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue, Liwan District,
Guangzhou, China, 510000
support@syncoaudio.com
www.syncoaudio.cn
Warranty Period
Warranty Exclusions and Limitations
Warranty Claim Procedure
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days
upon receipt of the product.
2. Original SYNCO products are entitled to 12-month limited warranty
service. The warranty period begins on the date of purchase of brand new,
unused products by the 󽗉rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Faults resulted from inappropriate use of a product without following its
operation speci󽗉cation：
1. Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking
2. Modi󽗉cations to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit, label
alteration
3. The code on product is inconsistent with that of warranty certi󽗉cate, or
the code on the product or warranty certi󽗉cate is altered or torn o󽗈
4. All consumable accessory attached to a product, like cable, wind mu󽗈,
battery
5. Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.
1. If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact SYNCO’s
customer service through email at support@syncoaudio.com.
2. Please retain your sales receipt and warranty certi󽗉cate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
3. If the SYNCO product is out of the warranty coverage, the service and
the parts cost will be charged.
Warranty
Product Model:
Date of Purchase:
Serial Number:
Malfunction Description :
Buyer Name:
Buyer Telephone :
Buyer Mail :
Buyer Address :
Dealer :
Dealer Telephone :
Delivery Date :
Cause of Malfunction :
Maintenance Personnel :
Malfunction Processing :
WARRANTY CERTIFICATE
8.Switch the Channel Mode
Short press the power button on the RX to switch the mono/stereo/safety
channel mode.
Default mono mode.
9.Charging
Connect the charging cable through Type-C port of TX and RX，and fully
charged in about 2 hours.
( The grey end of the 3-in-1 charging cable included in the packageNote:
can be used for digital output. )
7. Noise Cancellation
Short press the noise cancellation button on the transmitter to switch
between noise-control modes:
① Noise Cancellation O󽗈
② Low-Level Noise Cancellation
③ High-Level Noise Cancellation
Noise Cancellation O󽗈High-Level Noise
Cancellation
Low-Level Noise
Cancellation
10. Mic Windshield & Device Installation
Screw to mount the windshield.
TX RX
5. Real-time Monitoring
The 3.5mm monitoring port of the receiver supports digital monitoring,
which can simultaneously monitor the sound source of the transmitter
and the input sound source of the device.
6. Volume Control
① Press the power button on the TX to turn on/o󽗈 the mute.
② Short press the gain adjustment button of the TX to adjust the volume
for 6 levels (0-3-6-9-12-15).
③ Short press the gain adjustment of A/B TX buttons on the RX to adjust
the volume of A/B TX.
3.5mm Monitoring Jack
Headphone Impedance: under 100 Ω

Produkt Specifikationer

Mærke: Synco
Kategori: Mikrofon
Model: G2 Max

Har du brug for hjælp?

Hvis du har brug for hjælp til Synco G2 Max stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrofon Synco Manualer

Synco

Synco WAir P1S Manual

11 September 2025
Synco

Synco MIC-D1 Manual

11 September 2025
Synco

Synco WAir P2S Manual

11 September 2025
Synco

Synco G3 Pro Manual

8 Juli 2025
Synco

Synco P1S Manual

5 Juli 2025
Synco

Synco G2 Pro Manual

23 Juni 2025
Synco

Synco G2A1 Manual

2 April 2025
Synco

Synco PX Manual

2 April 2025
Synco

Synco MC3 LITE Manual

2 April 2025
Synco

Synco G2A2 Manual

2 April 2025

Mikrofon Manualer

Nyeste Mikrofon Manualer

AKG

AKG GN50 ESP Manual

12 September 2025
Karma

Karma SET 6090 Manual

12 September 2025
AKG

AKG HT45 Manual

12 September 2025
Karma

Karma SET 8202 Manual

12 September 2025
M-Audio

M-Audio Nova Manual

12 September 2025
Grimm Audio

Grimm Audio MP1 Manual

12 September 2025
Ipevo

Ipevo Vocal Manual

12 September 2025
CAD Audio

CAD Audio WXGTS Manual

12 September 2025
CAD Audio

CAD Audio U37 Manual

12 September 2025
Point Source Audio

Point Source Audio CX2-8D Manual

12 September 2025