
Thank you for choosing SYNCO product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your SYNCO Product
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, impact of external force.
· Do not attempt to disassemble the product. Doing so voids
· Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
· Failure to follow all the instructions may result in mechanics
· Warranty does not apply to human errors.
Single indicator keeps on
Connected and working normally.
The number of lights on indicates the
Working Indicators (White Light) On: Flash:
Working Indicators (White Light) On: Flash:
① Transmitter: Long press the power button of the transmitter for 3
*Note:The transmitter will shut down automatically if it is unpaired
or disconnected for 5 minutes.
② Receiver: Insert the mobile phone device to switch on
automatically, and the indicator ashes.
Transmitter x1 Charging cable
* Note:The indicator identication shown as follows.
Charge the transmitter via the Type-C charging
Insert your phone's charging cable into the Type-C port of the
receiver when in use, and the charging current is adjusted according
to the phone's battery max up to 800mA.
*Note: The receiver does not need to be charged and can be used
directly when plugged in the phone.
The transmitter and receiver will automatically start pairing once
*Note: For P1XT/L, each transmitter can only pair with a receiver.
Carrying Bag x1 User Manual x1