TOA P-912MK2 Manual

TOA Modtager P-912MK2

Læs gratis den danske manual til TOA P-912MK2 (12 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 3 anmeldelser. Har du et spørgsmål om TOA P-912MK2, eller vil du spørge andre brugere om produktet?

Side 1/12
TOA 900 SERIES II
POWER AMPLIFIER
Operating Instructions
P-906MK2
P-912MK2
P-924MK2
P-906MK2
P-912MK2
P-924MK2
TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
THE LIGHTNING FLASH WITH
ARROWHEAD WITHIN A TRIANGLE IS
INTENDED TO TELL THE USER THAT
PARTS INSIDE THE PRODUCT ARE A
RISK OF ELECTRIC SHOCK TO
PERSONS.
THE EXCLAMATION POINT WITHIN A
TRIANGLE IS INTENDED TO TELL
THE USER THAT IMPORTANT
OPERATING AND SERVICING
INSTRUCTIONS ARE IN THE PAPERS
WITH THE APPLIANCE.
Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
TOA Corporation
Contents
General description
Features
Nomenclature
Front panel
Rear panel
Input connections
Output connections
Rack mounting
Operation
Volume adjustment
Installation
Servicing
Specifications
Appearance (P-906MK2/P-912MK2)
Appearance (P-924MK2)
2
2
3
4
5
6
7
8
8
8
8
9
10
11
General Description
The TOA P-906MK2, P-912MK2 and P-924MK2 Power Amplifiers deliver up to 60 watts, 120 watts and 240
watts of power respectively at less than
0.5% total harmonic distortion (THD) from 20 to 20,000 Hz
(transformerless 4-ohm output). The power amplifiers have a high-impedance direct input and an input port
(edge connector) to accept one plug-in module. Module selection is determined by application among the
TOA plug-in modules.
The power amplifiers have a low-cut switch for a cutoff frequency of 60 Hz, and an input-level switch for input
sensitivity of 1V (0 dBV) or 100mV (20 dBV). Output terminals provide connections for 4-ohm and 8-ohm
speakers, plus 25-volt and 70-volt speaker distribution outlets. With plug-in modules, the power amplifiers
may be used as a PA amplifier.
The power amplifiers can be rack mounted by using optional rack mounting bracket MB-25B(P-906MK2,
P-912MK2) and MB-35B(P-924MK2). The optional perforated panel PF-511 provides suitable ventilation,
finished in color to match the power amplifiers.
Features
1. Wide frequency response : 20 ~ 20,000 Hz ± 1 dB
2. Low distortion and noise level
3. Excellent output regulation
4. A full range of plug-in modules
5. Self-protecting circuitry design
6. Varied output impedances : 4 ohms, 8 ohms, 25 and 70 volts
7. Input level switch (selectable
1000 mV/100 mV)
8. Portable or rack mounting type
– 2 –– 2 –


Produkt Specifikationer

Mærke: TOA
Kategori: Modtager
Model: P-912MK2

Har du brug for hjælp?

Hvis du har brug for hjælp til TOA P-912MK2 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Modtager TOA Manualer

TOA

TOA DA-250DH CU Manual

4 September 2024
TOA

TOA DA-250FH CU Manual

3 September 2024
TOA

TOA AV-20D Manual

1 September 2024
TOA

TOA DA-250F Manual

31 August 2024
TOA

TOA A-2240DD Manual

14 August 2024
TOA

TOA WT-5810 Manual

11 August 2024
TOA

TOA VX-015DA Manual

5 August 2024
TOA

TOA A-2120DD Manual

29 Juli 2024
TOA

TOA DA-250DH Manual

27 Juli 2024
TOA

TOA VM-3240VA Manual

24 Juli 2024

Modtager Manualer

Nyeste Modtager Manualer