TP-Link AC3200 Manual

TP-Link Router AC3200

Læs gratis den danske manual til TP-Link AC3200 (4 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 3.9 stjerner ud af 19 anmeldelser. Har du et spørgsmål om TP-Link AC3200, eller vil du spørge andre brugere om produktet?

Side 1/4
Quick Installation Guide
AC3200 Wireless Tri-Band Gigabit Router
Connecting the Hardware
Turn on the modem, and
then wait about 2 minutes
for it to restart.
Connect the modem to the
Internet port on your router with
an Ethernet cable.
If your Internet connection is through an Ethernet cable from the wall
instead of through a DSL / Cable / Satellite modem, connect the Ethernet
cable directly to the routers Internet port, then follow steps 5 and 6 to
complete the hardware connection.
Router
Modem
Power adapter
7106505511 REV1.0.2
Turn off the modem,
and remove the backup
battery if it has one.
2
Place the router horizontally and extend the
antennas to the maximum angle.
1
Note: For best performance, horizontal installation is recommended.
Antenna direction and position can affect performance in vertical
installation situations.
4
3
Turn on the router.
5
Verify that the following LEDs are on and stable before continuing with
the configuration.
6
Internet
On
Internet5GHz-1
On
5GHz-2
On
Power
On
2.4GHz
On
3200
Note:
1. If all the LEDs are off, press the LED On/Off button for about 1 second, then check the LEDs again.
2. If the 2.4GHz, 5GHz-1, and 5GHz-2 LEDs are off, press the Wi-Fi On/Off button for about 2 seconds, then
check the LEDs again in a few seconds.


Produkt Specifikationer

Mærke: TP-Link
Kategori: Router
Model: AC3200

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link AC3200 stil et spørgsmål nedenfor, og andre brugere vil svare dig