TP-Link Omada DS106GPP Manual

TP-Link bryter Omada DS106GPP

Læs gratis den danske manual til TP-Link Omada DS106GPP (5 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om TP-Link Omada DS106GPP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Wall Mounting Guide

Wall Mountable Switches

1.1 Wall Mounting Preparation

Before mounting the switch, you need to prepare the tools below:

Ǵ A screw driver.

Ǵ Two screws which complies to the corresponding standard. For details, see Wall

Mounting Specification.

1.2 Wall Mounting Procedure

On the bottom of the panel, there are two mounting holes. You need to drive two screws

into the wall, then mount the switch on the wall. Note that the switch should be mounted

on the wall upright rather than sideways. For TL-SF1008P/TL-SF1008LP/TL-SF1009P/

TL-SG1008P, the switch should be mounted with the ports facing downward and the

LEDs facing upward.

1) Determine the location on the wall where you want to mount the switch.

2) Mark the wall where the two mounting holes are. The distance between the two marks

must be the same as that between the two mounting holes of the switch. For the wall-

mounting-holes distance, see Wall Mounting Specification.

3) Drive the screws into the wall at the marks using the screw driver. For the Screw-

Head-to-Wall Minimum Distance, see Wall Mounting Specification.

4) Mount the switch on the wall.

1.3 Wall Mounting Specification

Model

Screw Standard of

ANSI B1.1

Minimum Length

of Screw

Screw-Head-to-Wall

Minimum Distance

Wall-Mounting-Holes

Distance

DS105G

4#, (5#), 6#, 8# 7.5mm

1.5mm 39mm

DS105GE

4#, (5#), 6#

7.5mm

1.5mm 52mm

DS105G-M2 4#, (5#), 6#

7.5mm

1.5mm 52mm

DS105GP

4#, (5#), 6#, 8# 8.5mm

1.5mm 39mm

DS105X 4#, (5#), 6# 7.5mm 1.5mm

150mm

DS106GPP 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

DS106P 4#, (5#), 6#, 8# 8.5mm 1.5mm 94mm

DS108G 4#, (5#), 6#, 8# 7.5mm 1.5mm 94mm

DS108GE 4#, (5#), 6# 7.5mm 1.5mm 110mm

DS108G-M2 4#, (5#), 6# 7.5mm 1.5mm 110mm

DS108GP

4#, (5#), 6#, 8#

8.5mm 1.5mm 94mm

DS110GMP 4#, (5#), 6# 8.5mm 1.5mm

150mm

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	bryter
Model:	Omada DS106GPP

Har du brug for hjælp?

Hvis du har brug for hjælp til TP-Link Omada DS106GPP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

bryter TP-Link Manualer

TP-Link Omada DS106GPP Manual

19 Oktober 2025

TP-Link Omada ES205G Manual

16 August 2025

TP-Link Omada DS1024GE Manual

25 Juli 2025

TP-Link LiteWave LS105GP Manual

24 Juni 2025

bryter Manualer

Nyeste bryter Manualer

Draytek VigorSwitch PQ2200xb Manual

17 Oktober 2025

Kramer VS-88H2 Manual

16 Oktober 2025

Lancom GS-3126X Manual

16 Oktober 2025

Lancom GS-2310 Manual

16 Oktober 2025

Lancom GS-3628X Manual

16 Oktober 2025

Lancom GS-3528 Manual

16 Oktober 2025

Eberle ZTM 2 Manual

15 Oktober 2025

Manhattan 154390 Manual

7 Oktober 2025

Draytek VigorSwitch P2121 Manual

6 Oktober 2025

Blustream MX44VW Manual

6 Oktober 2025