TP-Link TL-POE10E Manual

TP-Link Wifi repeater TL-POE10E

Læs gratis den danske manual til TP-Link TL-POE10E (2 sider) i kategorien Wifi repeater. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om TP-Link TL-POE10E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Guide

Note:

1. Make sure the Power Sourcing Equipment (PSE) and PD devices are connected to the corresponding ports properly.

2. The extender supports both Auto-Negotiation mode and 10Mbps mode. In 10Mbps mode, the maximum speed will downgrade to 10 Mbps.

3. The total cable length (a+b) is not recommended to exceed 350m, and the actual transmission distance may vary due to the type and quality of cables, power

consumption of PD devices, voltage at PSE, etc. If a or b ＞ 100m, enable 10Mbps mode rst.

4. If 100m ＜ a ≤ 250m, make sure the PSE supports extend mode.

PoE+ Extender

Connection

For technical support and other information, please visit

https://www.tp-link.com/support, or simply scan the QR code.

To ask questions, find answers, and communicate with TP-Link users

or engineers, please visit https://community.tp-link.com to join

TP-Link Community.

PSE

(e.g. PoE Switch, PoE Injector)

PoE+ Extender

Powered Device (PD)

a (100/250m) b (100/250m)

Power LED Explanation

On: Supplying p er normallyow

No p er supplyow

Safety Information

Do not attempt to disassemble, repair, or modify the device. If you need

service, please contact us.

This product can be powered only by p er supplies that comply with ow

Power Source Class 2 (PS2) or Limited P er Source(LPS).ow

Please read and follow the ab e safety information when operating the device. ov

We cannot guarantee that no accidents or damage will occur due to improper

use of the device. Please use this product with care and operate at your own risk.

Only PSE and PD devices compliant with IEEE 802.3 af/at can function well

with the extender. Do not use the extender with other devices to extend the

data transmission distance only.

Q1. Which devices can work normally with the extender?

A1: Ensure your network cable is in good condition.

A2: Ensure both PSE and PD devices are connected to the correct ports.

Q2. Why is the Power LED not lit?

FAQ

Q3. When should I enable the 10Mbps mode?

A: If you want to extend the transmission distance between the extender and

Ports

IEEE 802.3i, IEEE802.3uStandards

PWR

UTP/STP of Cat. 5E or ab e (based on the standards that the ov

connected devices comply with)

LED

Cable Type

Gener cationsal Speci

1*10/100 Mbps Auto-Negotiation RJ45 PoE IN Port

1*10/100 Mbps Auto-Negotiation RJ45 PoE OUT Port

EU Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of directives 2014/30/EU,

2014/35/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.

The original EU declaration of conformity may be found at

https://www.tp-link.com/en/ce.

UK Declaration of Conformity

TP-Link hereby declares that the device is in compliance with the essential

requirements and other relevant provisions of the Electromagnetic Compatibility

Regulations 2016 and Electrical Equipment (Safety) Regulations 2016.

The original UK Declaration of Conformity may be found at

https://www.tp-link.com/support/ukca

PoE Input Compliance with 802.3af/at devices

Maximum

PoE Output 20W

Explanation of the Symbols on

the Product Label

Operator’s manual

Caution

For indoor use only

RECYCLING

This product bears the selective sorting symbol for Waste electrical

and electronic equipment (WEEE). This means that this product must

be handled pursuant to European directive 2012/19/EU in order to be

re cled or dismantled to minimize its impact on the environment.cy

User has the choice to give his product to a competent re cling cy

organization or to the retailer when he buys a new electrical or

electronic equipment.

The product label is at the bottom of the product

Operating Temperature

Storage Temperature

Operating Humidity

Storage Humidity

0 C to 45 C (32 F to 113˚ ˚ ˚ ˚F)

-40 C to 70 C (-40 F to 158˚ ˚ ˚ ˚F)

10% to 90%RH non-condensing

5% to 90%RH non-condensing

Environmental and Physical Specications

Produkt Specifikationer

Mærke:	TP-Link
Kategori:	Wifi repeater
Model:	TL-POE10E
Type:	Netværksgentager
Bredde:	71 mm
Dybde:	26 mm
Højde:	16 mm
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 90 %
Ethernet LAN-porte (RJ-45):	2
Driftstemperatur (T-T):	0 - 45 °C
Ethernet LAN-datahastigheder:	10, 100 Mbit/s
Husmateriale:	Plast
Hurtig start guide:	Ja
Certificering:	FCC, CE, RoHS
Kabelteknologi:	10/100Base-T(X)
Netværksstandarder:	IEEE 802.3i, IEEE 802.3u
LED-indikatorer:	Strøm
Bæredygtighedscertifikater:	Federal Communications Commission (FCC), RoHS
Værtsgrænseflade:	RJ-45
Plug and play:	Ja
Maksimal overførselsafstand:	250 m
Overholdelse af bæredygtighed:	Ja
RJ-45 indgangs-porte:	1
Dataoverførselshastighed:	100 Mbit/s
Power over Ethernet (PoE) porte, antal:	2
Auto-forhandling:	Ja
Understøttede kabeltyper:	Cat5e
RJ-45 udgangs-porte:	1