Tripp Lite CSC27AC Manual

Tripp Lite Oplader til mobilenhed CSC27AC

Læs gratis den danske manual til Tripp Lite CSC27AC (24 sider) i kategorien Oplader til mobilenhed. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Tripp Lite CSC27AC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/24

Table of Contents

1. Important Safety Instructions 2

2. Overview 2

3. Feature Identiﬁcation 3

4. Storage Shelf Conﬁguration 5

5. Setup 6

5.1 Power Requirements 6

5.2 Installing the Handle Bracket, 6

Corner Safety Bumpers and

Power Cord Manager

5.3 Connecting Devices and 7

Powering the AC Unit

5.4 Door Locks 7

6. Speciﬁcations 8

7. Storage, Service and Cleaning 8

8. Warranty and Product Registration 8

Español 9

Français 17

Charging Station Carts

Models: CSC21AC (21 Slots), CSC27AC (27 Slots)

Owner’s Manual

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

PROTECT YOUR INVESTMENT!

You could also win an ISOBAR6ULTRA surge protector—a $100 value!

www.tripplite.com/warranty

1. Important Safety Instructions

2. Overview

SAVE THESE INSTRUCTIONS

This manual contains instructions and warnings that must be followed during the installation and operation of the product described in this manual.

Failure to comply may invalidate the warranty and cause property damage or personal injury.

AC Unit:

• Do not use a power adapter to connect the charging station to a power source. Use only the charging station’s AC plug to connect directly to

the supply mains.

• To remove the AC unit from the supply mains, the power cord serves as a disconnect device.

• If any of the following situations arise, schedule an appointment to have your equipment inspected by a service technician:

• The equipment has been exposed to moisture

• The equipment has been dropped and damaged

• The equipment shows obvious signs of breakage

• The equipment is not functioning properly or is not functioning according to the instructions described in this Owner’s Manual

• Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the life support

equipment or to significantly affect its safety or effectiveness is not recommended.

Charging Station Cabinet:

• Keep the charging station in a controlled indoor environment away from moisture, temperature extremes, flammable liquids and gasses, conductive

contaminants, dust and direct sunlight.

• Leave adequate space around the charging station for proper ventilation. Do not block, cover or insert objects into the charging station’s external

ventilation openings.

• The charging station is extremely heavy. Use caution when handling the charging station. Do not attempt to unpack the charging station unassisted.

Use a mechanical device such as a forklift or pallet jack to move the charging station in the shipping container.

• Inspect the shipping container and the charging station for shipping damage. Do not use the charging station if it is damaged.

• Use caution when cutting packing materials. The charging station could be scratched, causing damage not covered by the warranty.

• Save all packing materials for later use. Repacking and shipping the charging station cabinet or equipment without the original packing materials

may cause product damage that will void the warranty.

• The charging station includes four pre-installed casters.

• Always use the included handle when moving the charging station (see section 5.2 Installing the Handle Bracket Corner Safety Bumpers and

Power Cord Manager for more information).

• When moving the charging station cabinet, always push it from behind; never pull it toward you.

• A rolling charging station can cause personal injury and property damage if not properly supervised. If rolling the charging station down a ramp is

required, use extreme caution. Do not attempt to use ramps that have a slope grade greater than 12%.

Your charging station is an all-in-one solution for storing and charging devices. With four pre-installed casters and an attachable, reversible handle