Tripp Lite PDU3VN6G60C Manual

Tripp Lite stikdase PDU3VN6G60C

Læs gratis den danske manual til Tripp Lite PDU3VN6G60C (76 sider) i kategorien stikdase. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Tripp Lite PDU3VN6G60C, eller vil du spørge andre brugere om produktet?

Side 1/76
1
Owner’s Manual
3-Phase Monitored 0U Power
Distribution Units
(Phase and Bank Measurements)
208V MODELS
PDU3VN6L2120 PDU3VN6L2130 PDU3VN6G30B
(Series Number: AG-00B8) (Series Number: AG-00B9) (Series Number: AG-00BA)
400V MODEL
PDU3XVN6G20
(Series Number: AG-00BD)
Important Safety Instructions 2
Installation 3
Digital Display 6
Using the Digital Display 9
Features 16
Configuration and Operation 18
Service 18
Warranty and 19
Product Registration
Español 20
Français 39
Русский 58
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2014 Tripp Lite. All rights reserved.
PDU3VN6L1530B
(Series Number: AG-00BA)
PDU3VN6L2130B
(Series Number: AG-00BA)
PDU3VN6H50B
(Series Number: AG-00BA)
PDU3VN6G60B
(Series Number: AG-00BA)
PDU3VN6G60C
(Series Number: AG-00BB)
14-07-037-9332F9.indb 1 8/15/2014 3:13:05 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during
the installation, operation, and storage of this product. Failure to heed these
instructions and warnings may affect the product warranty.
The PDU provides the convenience of multiple outlets, but DOES NOT provide surge or line
noise protection for connected equipment.
The PDU is designed for indoor use only, in a controlled environment, away from excess
moisture, temperature extremes, conductive contaminants, dust or direct sunlight.
Keep indoor ambient temperature between 32°F and 122°F (0°C and 50°C).
The PDU must be installed by a qualified technician only.
Do not attempt to mount the PDU to an insecure or unstable surface.
Install in accordance with National Electrical Code standards. Be sure to use the proper
overcurrent protection for the installation, in accordance with the plug/equipment rating.
Connect the PDU to an outlet that is in accordance with your local building codes and that is
adequately protected against excess currents, short circuits and earth faults.
The electrical outlets supplying power to the equipment should be installed near the equipment
and easily accessible.
Do not connect the PDU to an ungrounded outlet or to extension cords or adapters that
eliminate the connection to ground.
Be sure to provide a local disconnect device on any models that are permanently installed
without a plug that is easily accessible.
Never attempt to install electrical equipment during a thunderstorm.
Individual equipment connected to the PDU should not draw more current than the individual
PDU’s outlet’s rating.
The total load connected to the PDU must not exceed the maximum load rating for the PDU.
Do not attempt to modify the PDU, input plugs or power cables.
Do not drill into or attempt to open any part of the PDU housing. There are no user-serviceable
parts inside.
Do not attempt to use the PDU if any part of it becomes damaged.
Use of this equipment in life support applications where failure of this equipment can
reasonably be expected to cause the failure of the life support equipment or to significantly
affect its safety or effectiveness is not recommended. Do not use this equipment in the
presence of a flammable anesthetic mixture with air, oxygen or nitrous oxide.
14-07-037-9332F9.indb 2 8/15/2014 3:13:05 PM


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: stikdase
Model: PDU3VN6G60C

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite PDU3VN6G60C stil et spørgsmål nedenfor, og andre brugere vil svare dig