Tripp Lite PS-602-HG Manual

Tripp Lite stikdase PS-602-HG

Læs gratis den danske manual til Tripp Lite PS-602-HG (8 sider) i kategorien stikdase. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Tripp Lite PS-602-HG, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

PROTECT YOUR INVESTMENT!

and ultimate peace of mind.

You could also win an

ISOBAR6ULTRA surge protector—

a $100 value!

www.tripplite.com/warranty

1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support

Owner’s Manual

PS Series

Power Strips

Español 4 • Français 6

17-06-031-933707.indb 1 6/6/2017 8:52:51 AM

Installation

Connect Your Power Strip to Your AC Power Line

Plug the power cord into a utility outlet. The power strip’s power cord should only be connected

to a standard 3-wire grounded 120V AC 60 Hz outlet.

Connect AC Equipment to Your Power Strip

Plug the AC power cords of your equipment into your power strip. Do not use extension cords

or adapters that eliminate the connection to ground. DO NOT OVERLOAD your power strip. Each

outlet can handle a load of up to the model’s amp rating, but do not exceed a total load of

more than the model’s amp rating for all outlets. If the circuit breaker trips, outlets will cease to

provide power. Reduce the load on the power strip down to your unit’s amp rating by unplugging

excess equipment, then depress the circuit breaker button to reset and restore power.

IMPORTANT SAFETY INSTRUCTIONS.

SAVE THESE INSTRUCTIONS.

WARNING

Use of this equipment in life support applications where failure of this

equipment can reasonably be expected to cause the failure of the life

support equipment or to signiﬁcantly affect its safety or effectiveness

is not recommended. Do not use this equipment within oxygen-enriched

atmospheres, or within 0.3 m of a point at which an oxygen-enriched

atmosphere is intentionally vented.

CAUTION

DO NOT connect to an ungrounded outlet. DO NOT use with extension cords or

adapters that eliminate the connection to ground. The power strip is designed

for indoor use only. Install the power strip away from heat emitting appliances

such as radiators or heat registers. Do not install where excessive moisture

or other conductive contaminants are present. Never install electrical wiring

during a lightning storm.

17-06-031-933707.indb 2 6/6/2017 8:52:52 AM

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	stikdase
Model:	PS-602-HG
Tænd-/slukkontakt:	Ingen
Vekselstrømsindgangsspænding:	120 V
Vekselstrømsindgangsfrekvens:	50 / 60 Hz
Bredde:	63.5 mm
Dybde:	41.9 mm
Højde:	346.2 mm
Vægt:	820 g
Produktfarve:	Hvid
Pakkevægt:	1000 g
Pakkedybde:	363.2 mm
Pakkebredde:	147.3 mm
Pakkehøjde:	50.8 mm
Husmateriale:	Metal
Dimensioner (BxDxH):	349 x 64 x 38 mm
Kabellængde:	0.45 m
Understøttet placering:	Indendørs
Hovedkassen højde (udvendigt):	381 mm
Hovedkassens længde (udvendigt):	302.3 mm
Hovedkassens bruttovægt (udvendigt):	10160 g
Hovedkassens bredde (udvendigt):	297.2 mm
Oprindelsesland:	Taiwan
Produkter pr. hovedkasse (udvendigt):	10 stk
Kabelfarve:	Hvid
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332121049
AC udgange, antal:	6 AC stikkontakt(er)
AC stikkontakt typer:	NEMA 5–15R
Strøm (maks.):	15 A