Tripp Lite PS7224-20HW Manual

Tripp Lite stikdase PS7224-20HW

Læs gratis den danske manual til Tripp Lite PS7224-20HW (4 sider) i kategorien stikdase. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Tripp Lite PS7224-20HW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

1111 W. 35th Street

Chicago, IL 60609 USA

(773) 869-1234

www.tripplite.com

TRIPP LITE

POWER STRIPS

(Hardwire Models)

Your Power Strip is designed to provide convenient multiple AC outlets. NOTE: The Power Strip

DOES NOT provide your connected equipment with surge or line noise protection.

MOUNTING

Hardwire Power Strip models feature mounting holes in the back cover for permanent mounting

to a variety of flat surfaces.

1. Remove cover by unfastening screws located on each side of the unit.

2. Mark a straight, horizontal line where you want to mount the Power Strip. Place the

Power Strip along the line, ensuring that the line intersects the center of each mounting

hole.

3. Using screws and other appropriate hardware (user supplied), mount the Power Strip to

the surface.

ELECTRICAL CONNECTION

Connect your Power Strip to a circuit provided with adequate overload protection (either a circuit

breaker or a fuse).

1. Remove knockout on the Power Strip end located closest to desired electrical source.

2. Install 1/2 in (1.3 cm) BX connector.

3. Connect incoming ground wire

to closest ground lug inside the

Power Strip.

4. Connect incoming hot (black)

wire to the Power Strip's internal

hot (black) wire using supplied

wire nut.

5. Connect incoming neutral

(white) wire to the Power Strip's

internal neutral (white) wire using

supplied wire nut.

6. Reinstall Power Strip cover.

EQUIPMENT CONNECTION

Plug your equipment into the Power Strip's AC receptacles. DO NOT plug in equipment that

draws more than the amperage rating of your circuit, or you will either trip your circuit breaker or

blow your fuse. If this occurs, remove overload and reset circuit breaker or replace fuse.

Français : p. 2; Español: p. 3

Step #3

CUS

Produkt Specifikationer

Mærke:	Tripp Lite
Kategori:	stikdase
Model:	PS7224-20HW
Vekselstrømsindgangsspænding:	120 V
Pakkevægt:	3450 g
Pakkedybde:	1943.1 mm
Pakkebredde:	66 mm
Pakkehøjde:	71.1 mm
Dimensioner (BxDxH):	38 x 38 x 1828 mm
Hovedkassen højde (udvendigt):	157.5 mm
Hovedkassens længde (udvendigt):	1955.8 mm
Hovedkassens bruttovægt (udvendigt):	21050 g
Hovedkassens bredde (udvendigt):	210.8 mm
Oprindelsesland:	Kina
Produkter pr. hovedkasse (udvendigt):	6 stk
Kabelfarve:	Hvid
Hovedkasse (udvendig) GTIN (EAN/UPC):	10037332042368
Strøm (maks.):	20 A