Tycon Systems RPAL48-180-1000 Manual

Tycon Systems Solpanel RPAL48-180-1000

Læs gratis den danske manual til Tycon Systems RPAL48-180-1000 (4 sider) i kategorien Solpanel. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Tycon Systems RPAL48-180-1000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

RPAL48-180- xxxx

200W RemotePro™

▫ Wireless Base Stations

and Client Devices

▫ Surveillance Cameras

▫ Remote Control

▫ Remote Lighting

▫ Off Grid Electronics

Congratulations! on your purchase of the RemotePro 200W ™

Remote Power System. Please take a moment to review this

Qwik Install Guide before use.

Operation Modes: Solar Only operation or Solar with AC/DC

Backup.

Key Features: Industrial Strength, Manageable, 24VDC and

48VDC Output, 7 Gigabit Passive PoE ports, 2.25A Aux Port,

48V 20A MPPT Solar, Automated Alerts, Removable Connec-

tions.

Safety: For your own protection, follow these safety rules.

▫ Perform as many functions as possible on the ground

▫ Do not attempt to install on a rainy, windy or snowy day or if

there is ice or snow accumulation at the install site or if the

site is wet.

▫ Make sure there are no people, pets, etc. below if you are

working on a roof or ladder.

Recommended Tools: Phillips and Small Flat Blade Screwdriv-

ers, 6mm Hex key and 13, 19, 27, 34mm Wrenches

Please help preserve the environment and return

any used batteries to an authorized depot

Qwik Install

STEP 1: Select install location where southern sky has no obstructions

that could cause shading on solar panels.

STEP 2: Pour a foundation big enough to hold solar mount anchors

and also provide level support for battery box. See detailed instructions

in solar mount instructions.

STEP 3: Assemble solar array with mount using solar mount instruc-

tions.

STEP 4: Place battery box under solar panels facing towards back of

solar panels. Install 8 batteries in the box in an alternating pattern. Use

rope tied to battery tabs to lower batteries into the box. Connect all 8

batteries in series configuration (Positive to Negative to Positive...)

STEP 5: Install DIN rail to enclosure using the two screws provided.

Install MPPT solar controller to DIN Rail. Remove the Large Green

Connector from the unit.

STEP 6: Find the thermocouple cable that came with the MPPT Solar

Controller and connect the side with the ring lug to one of the batteries

positive or negative terminals, it doesn t matter which one. Connect the ’

battery cable to the Large Green Connector battery inputs and then to

the batteries making sure to observe the proper polarity.

STEP 7: Install the cable glands in the back of the enclosure and route

the long solar panel cables through the cable gland and connect to the

large green connector solar (PV) inputs. A four panel system will use

two of the long cables and a two panel system will use one of the long

cables. You can shorten the cables as necessary for a cleaner install.

You can also lengthen the cables by adding additional lengths of

12AWG cable.

STEP 8: Connect two of the solar panels in series (Positive to Nega-

tive) by plugging the positive from panel 1 to the negative of panel 2

and then connect the long solar cable to the remaining positive and 20’

Produkt Specifikationer

Mærke:	Tycon Systems
Kategori:	Solpanel
Model:	RPAL48-180-1000

Har du brug for hjælp?

Hvis du har brug for hjælp til Tycon Systems RPAL48-180-1000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Solpanel Tycon Systems Manualer

Tycon Systems RemotePro Manual

22 August 2024

Tycon Systems RPAL48-180-1000 Manual

22 August 2024

Solpanel Manualer

Nyeste Solpanel Manualer

Technaxx TX-241 Manual

25 Juli 2025

Phaesun Fresh Breeze Manual

23 Juli 2025

Mestic MSBC-130 Manual

22 Juli 2025

Osram OSP1000 Manual

21 Juli 2025

Phaesun Solar Rise One 2.0 Manual

14 Juli 2025

MSW S-POWER KIT100 Manual

10 Juli 2025

Dometic PS120A Manual

8 Juli 2025

NEO Tools 90-144 Manual

6 Juli 2025

Xtorm XP2SW200 Manual

6 Juli 2025

TP-Link VIGI SP9030 Manual

1 Juli 2025