UPM TR310 Manual

UPM Ikke kategoriseret TR310

Læs gratis den danske manual til UPM TR310 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om UPM TR310, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RC420+TR310

outdoor remote control set

OWNERS

MANUAL

Congratulations on your

purchase of a UPM outdoor

remote control set. Please

take the time to read and

understand this manual so

you can begin to enjoy the

convenience this product

has to offer.

FEATURES

! 433 MHz RF technology

! Control up to 2 remote

receivers

! Heavy duty loading up

to 1800W / 15A resistive

! Drip-proof cover design

! Transmission range of

up to 30 meters in open

area

GETTING STARTED

battery installation

TROUBLESHOOTING

remove the battery cover from

the back of the transmitter

place two button cell batteries

between terminals observing

proper polarity, then replace cover

Transmitter stops turning receiver

on and off.

Use the LEARN function to

reprogram the receiver

Check the battery.

problem

solution

TECHNICAL SPECIFICATIONS

Ratings: 120V AC, 15A

Max Load: 1800W resistive; 600W tungsten

Transmission Range: up to 30 meters in open area

Transmission Frequency: 433.92 MHz

Receiver

Transmitter

Batteries are not required in the RC420

receiver. Two button cell batteries are

included for the TR310 transmitter.

the green LED will light up

with any key press once the

battery is installed correctly

button descriptions

ON/OFF

LEARN - used when

programming receiver

channel

LED indicator

CH 1 - ON

CH 1 - OFF

Learn

On/Off

Cord

120V 15A Plug

LED

Indicator

Learn Key

On/Off Key

Learn

On/Off

LEARN FUNCTION

Press LEARN on receiver while

simultaneously pressing the desired

channel button on the transmitter

Plug receiver into wall socket

If LEARN is completed successfully,

the LED on the receiver should light

up when ON is pressed

The ON/OFF button on the receiver

also turns power on and off

Power On/Off by using the ON/OFF

keys on the transmitter

ON/OFF FUNCTION

Learn

On/Off

Learn

On/Off

This device complies with Part 15 of the FCC Rules of Operation and is

subjected to the following two conditions:

1. this device may not cause harmful interference, and

2. this device must accept any interference received,

including interference that may cause undesired operation.

FCC COMPLIANCE

Repeat and for an additional

receiver (available at your local

retailer)

INSTRUCTION TO THE USER

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and if not installed and used in accordance with the

instructions , may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

! Reorient or relocate the receiving antenna.

! Increase the separation between the equipment and receiver.

! Connect the equipment into an outlet on a circuit different from that

to which the receiver is connected.

! Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must

be used with this equipment. Operation with non-approved equipment or

unshielded cables is likely to result in interference to radio and TV reception.

The user is cautioned that changes and modifications made to the equipment

without the approval of manufacturer could void the user’s authority to

operate this equipment.

CH 2 - ON

CH 2 - OFF

MOUNTING BRACKET

WARNING: To avoid shock hazard, timer must be installed vertically and at least 3 ft.

above ground level.

For safe and optimal performance, use the supplied mounting bracket to hold the

timer vertically and flush against the wall. You will require your own tools and

accessories (i.e. power drill, bits, screws, and/or screwdriver) for proper installation.

http://waterheatertimer.org/UPM-timers-and-manuals.html

Produkt Specifikationer

Mærke:	UPM
Kategori:	Ikke kategoriseret
Model:	TR310

Har du brug for hjælp?

Hvis du har brug for hjælp til UPM TR310 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret UPM Manualer

13 September 2024

1 August 2024

26 Juli 2024

25 Juli 2024

19 Juli 2024

15 Juli 2024

15 Juli 2024

10 Juli 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

DS18 VOC8PRO Manual

5 November 2025

Icron Rover 2850 Manual

5 November 2025

Amaran Peak Manual

5 November 2025

WesAudio Timbre Manual

5 November 2025

MuxLab 500800-TX Manual

5 November 2025

Tripp Lite PDUMH30HVATNET Manual

5 November 2025

NeXtime Plug Inn 2610 ZI Manual

5 November 2025

MSI MS-ND82 Manual

5 November 2025

Sonifex Redbox RB-MSP6 Manual

5 November 2025

NeXtime Plug Inn 2610 ZW Manual

5 November 2025