Vanson SMP-600A-1 Manual

Vanson UPS SMP-600A-1

Læs gratis den danske manual til Vanson SMP-600A-1 (5 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om Vanson SMP-600A-1, eller vil du spørge andre brugere om produktet?

Side 1/5
English
GREAT BRITAIN CUSTOMER SERVICE
tel: 0845 300 9799 www.clasohlson.com/ukinternet:
e-mail customerservice@clasohlson.co.uk
Ver. 20140210
USB Mains Adaptor
Art.no 18-2697 Model SMP-600A-1-UK
36-4862 SMP-600A-1
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our Customer Services.
Safety
• This adaptor should only be repaired by qualified
service technicians.
• The adaptor should not be taken apart or modified.
• Do not place the adaptor where there is a risk of it
falling into water or other liquid.
• Do not subject the adaptor to impacts or vibrations.
• Do not short circuit the adaptor’s output socket.
• Do not connect devices that use more than 2.1 A.
• Disconnect the adaptor from the mains when it is not
in use.
• Make sure that the load device is turned off before
connecting it to the adaptor.
Warning:
• Incorrect voltage or polarity can cause damage to
connected devices.
• Turn off the connected device before connecting/
disconnecting the adaptor.
• Always check the polarity with a multimeter or similar
instrument if you are in the least unsure.
Product description
Mains adaptor suitable for devices normally powered or
charged via a USB port, max load 2.1 A. Comes with nine
interchangeable connectors for, amongst other things,
Micro USB type B (Smart Phones/Android phones),
Mini USB, connectors for older phone models by Nokia,
Samsung and Sony Ericsson. The mains adaptor can
be used to charge iPod/iPad/iPhone if the original cable
is used. Energy saving adaptor with auto shut-off which
completely turns off the adaptor and draws no current if
no device is connected.
Contents
• AC/DC mains adaptor
• USB cable
• 9 DC connectors for various devices.
Operation
1. Make sure that the current used by the connected
device does not exceed 2.1 A.
2. Connect the USB cable to the adaptor.
3. Find out which of the adaptor’s DC connectors ts
your product (try the connectors for size while they
are still loose). Join the DC charger connector to the
adaptor’s cable connector by pushing them together.
4. Make sure that the DC connector and the cable
connector are securely pushed together.
5. Connect the DC connector to the load device.
Make sure that the load device is turned off before
connecting the DC connector.
6. Connect the adaptor to the mains, the LED should
light up.
7. Turn the load device on.
Care and maintenance
Unplug the adaptor before cleaning it. Clean the adaptor
using a soft, moist cloth and never use strong detergents or
solvents.
Disposal
This product should be disposed of in accordance with
local regulations. If you are unsure how to proceed,
contact your local authority.
Specifications
Rated voltage Input: 100–240 V AC, 50/60 Hz
Output: 5 V DC, 2.1 A
Cable length 0.6 m


Produkt Specifikationer

Mærke: Vanson
Kategori: UPS
Model: SMP-600A-1

Har du brug for hjælp?

Hvis du har brug for hjælp til Vanson SMP-600A-1 stil et spørgsmål nedenfor, og andre brugere vil svare dig




UPS Vanson Manualer

Vanson

Vanson SMP-600A-1 Manual

23 August 2024
Vanson

Vanson SMP-2A Manual

23 August 2024

UPS Manualer

Nyeste UPS Manualer

APC

APC RBC150 Manual

2 April 2025
APC

APC RBC151 Manual

2 April 2025
APC

APC RBC145J Manual

29 Marts 2025
APC

APC RBC140J Manual

29 Marts 2025
APC

APC AP9922 Manual

29 Marts 2025
APC

APC RBC148 Manual

29 Marts 2025
Teltonika

Teltonika BAT120 Manual

30 Januar 2025
APC

APC BX1000M Manual

30 Januar 2025
APC

APC BX850 Manual

30 Januar 2025