Vaxcel C0255 Manual

Vaxcel Lys C0255

Læs gratis den danske manual til Vaxcel C0255 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Vaxcel C0255, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

C0255

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Turn on the power at fuse or circuit box

Installation Steps

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)Mounting Strap Unit (A)

Outlet Box

House Ground Wire

Fixture Mounting Screw (D)

Mounting Strap (A)

Green Ground Screw (C)

Mounting Screw (B)

Canopy

Bolt Nut (D)

Rod

Metal Bar

Metal Ring

Interior Glass

wire connector (E)

Swivel

Max 60W

Medium base bulb

(not included)

1. Tighten the rod to the swivel.

2. Attach the two assembly screws to the

mounting strap unit (A), and screw in 2 to 3 turns.

3. Attach the mounting strap unit (A) to the outlet box

using two mounting screws (B).

4. Pull out the source wires from the outlet box.

Make wire connections using wire connectors (C)

as follows:

---Connect the hot wire (black insulation)

from the fixture to the black wire from

the power source.

---Connect the neutral wire (white insulation)

from the fixture to the white wire from the

power ource.

---Attach the fixture grounding wire

(bare wire) to the mounting strap unit (A)

with the green ground screw, and then

connect it to the house ground wire with

the wire connector (C) .

Carefully put the wires back into the outlet box.

5. Attach the canopy to the mounting unit (A) by

inserting two assembly mounting screws, and

then sccure it with two bolt nuts (D) .

6. Put the interior glass in the metal ring, tighten with metal bar and then secure it with two bolt nuts (D).

7. Install 3 X 60W medium base bulbs (not included).

See relamping label at socket area or packaging for maximum wattage allowed.

Page 1 / 2

240628

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Lys
Model:	C0255

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel C0255 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Vaxcel Manualer

Vaxcel Beverly W0440 Manual

4 Januar 2026

Vaxcel Burnaby C0308 Manual

3 Januar 2026

Vaxcel T0757 Manual

3 Januar 2026

Vaxcel Alto C0220 Manual

3 Januar 2026

Vaxcel Alto C0221 Manual

3 Januar 2026

Vaxcel C0255 Manual

3 Januar 2026

Vaxcel W0169 Manual

3 Januar 2026

Vaxcel H0185 Manual

2 Januar 2026

Vaxcel Racine P0398 Manual

2 Januar 2026

Vaxcel Glencoe H0266 Manual

2 Januar 2026

Lys Manualer

Nyeste Lys Manualer

Progress Lighting East Haven P6075-20 Manual

4 Januar 2026

Govee H605A Manual

4 Januar 2026

Forte Lighting 2755-01 Manual

4 Januar 2026

Govee H6078 Manual

4 Januar 2026

Bellevue Fleurette QZBF20221BN Manual

4 Januar 2026

Govee H6079 Manual

4 Januar 2026

ET2 Alumilux E41388 Manual

4 Januar 2026

DCW YASUKE Manual

4 Januar 2026

Govee H6020 Manual

4 Januar 2026

Govee H6048 Manual

4 Januar 2026