Vaxcel Glenview W0552 Manual

Vaxcel Lys Glenview W0552

Læs gratis den danske manual til Vaxcel Glenview W0552 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel Glenview W0552, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
W0552
Mounting Plate Unit (A)
Wire Connector (C)
Mounting Screw (B)
Bolt Nut (D)
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
Hardware Package (included):
Page 1 / 2
Fixture Ground Wire
Wire Connector (C)
Mounting Plate Unit (A)
House Ground Wire
Green Ground Screw
Fixture Wire
Backplate
Mounting Screw (B)
Shade
Socket Ring
Outlet Box
Fixture Mounting Screw
Max. 40W Candelabra Base
(not included)
Socket
Bolt Nut (D)
1. Unscrew the two bolt nuts (D), remove the mounting plate unit (A) from the backplate.
2. Attach the mounting plate unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the
preinstalled fixture mounting screws if necessary.
Note: Make sure that two fixture mounting screws are lined up vertically make the fixture level.
Turn off the power at fuse or circuit box.
Installation Steps
250820


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: Glenview W0552

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Glenview W0552 stil et spørgsmål nedenfor, og andre brugere vil svare dig