Vaxcel H0287 Manual

Vaxcel Lys H0287

Læs gratis den danske manual til Vaxcel H0287 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel H0287, eller vil du spørge andre brugere om produktet?

Side 1/2
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save this instructions.
H0285 / H0287
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Turn off the power at fuse or circuit box
Installation Steps
1
. Unscrew the bolt nuts (D), take out the mounting plate
unit (A) and then attach to the outlet box by using two
mounting screws (B).
2. Rod Connections:
a. Thread the fixture wire through the
lower rod, then secure the lower rod
onto tube using the threaded pipe.
b. Thread the fixture wire through the
middle rod and then secure the middle
rod onto the lower rod using the threaded
pipe.
c. Thread the fixture wire through the upper
rod, then secure the upper rod onto the
middle rod using the threaded pipe.
Note: Length adjustable from 18-3/4" to
63-3/4". Use fewer rods if shorter length is
desired.
3. Thread the fixture wire through the canopy kit,
then secure the rod assembly to the set threaded
pipe of the canopy kit.
4. Pull out the source wires from the outlet box.
Make wire connections using wire connectors (C)
as follows:
---Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source.
---Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source.
---Attach the fixture ground wire (bare wire) to the mounting plate unit (A) with the green ground screw,
then connect it to the house ground wire with the wire connector (C).
Carefully put the wires back into the outlet box.
5. Attach the canopy kit onto the mounting plate unit (A) and tighten it with two bolt nuts (D).
Hardware Package (included):
Wire Connector (C)
Mounting Screw (B)
Mounting plate Unit (A)
Bolt Nut (D)
House Ground Wire
Fixture Ground Wire
Fixture Mounting Screw
Wire Connector (C)
Bolt Nut (D)
Mounting Plate Unit (A)
Green Ground Screw
Mounting Screw (B)
Outlet Box
Canopy Kit
Threaded Pipe
Page 1 / 2
Max. 60W Medium Base
Bulb (not included)
Socket Ring
Glass Shade
Fixture
Upper Rod
Threaded Pipe
Threaded Pipe
Middle Rod
Threaded Pipe
Low Rod
Middle Rod-1
230627
Set Threaded Pipe


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Lys
Model: H0287

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel H0287 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Lys Vaxcel Manualer

Vaxcel

Vaxcel C0253 Manual

16 December 2025
Vaxcel

Vaxcel H0275 Manual

16 December 2025
Vaxcel

Vaxcel W0396 Manual

16 December 2025
Vaxcel

Vaxcel W0303 Manual

16 December 2025
Vaxcel

Vaxcel C0024 Manual

16 December 2025
Vaxcel

Vaxcel H0261 Manual

16 December 2025
Vaxcel

Vaxcel T0265 Manual

16 December 2025
Vaxcel

Vaxcel C0177 Manual

16 December 2025
Vaxcel

Vaxcel C0077 Manual

16 December 2025
Vaxcel

Vaxcel P0344 Manual

16 December 2025

Lys Manualer

Nyeste Lys Manualer

NightStick

NightStick TWM-350 Manual

16 December 2025
NightStick

NightStick XPR-5561G Manual

16 December 2025
NightStick

NightStick XPR-5572RM Manual

16 December 2025
NUVO

NUVO 65/748 Manual

16 December 2025
NUVO

NUVO 65/213 Manual

16 December 2025
Dainolite

Dainolite CER-3LEDT Manual

16 December 2025
V-TAC

V-TAC VT-ST20CCT Manual

16 December 2025
Dals

Dals CFLEDSQ06-CC Manual

16 December 2025
Dals

Dals CFLEDR14-CC Manual

16 December 2025